TP-Link 9970 Manual de usuario

Page 1 of 4

nbnTM Service Upgrade User Guide

Modem Reconfiguration Guide - TP-Link 9970

MKTG-101 FTTN & FTTB - TP-Link TD-W9970 - 11.07.2017

Congratulations in upgrading your existing ADSL service to your new

ACN nbn™ Broadband Service

This guide details the steps to follow when setting up your new NBN Service using your existing ACN supplied TP-LINK

modem.

If you ordered an ACN nbn™ + Phone Bundle service you should also have received an ACN VoIP package that includes

the equipment you need to set up the phone component of your nbn™ + Phone service, plus a separate User Guide. It is

important that you complete the set-up of your ACN nbn™ Broadband service prior to attempting the set-up of the Phone

component of your Service. For further details, refer to the User Guide provided with your VoIP Phone service.

Important Note: Before you begin the set up and conguration, please ensure that you have received your ACN

Activation email (sent to the email address you provided us when you signed up for your ACN migration service).

This email conrms that your new ACN nbn Broadband service is ready for set up.

This Setting up your ACN nbn™ Broadband Service (reconguring the ACN Modem)

Before you begin reconguring your existing ACN Modem, please remove the ADSL lter and any existing telephone lines

that are connected to the telephone socket. Then reconnect the modem telephone cable to the telephone socket.

Existing ADSL Connection New NBN Connection

To be connected via an ATA

to the modem at a later stage

Page 2 of 4

nbnTM Service Upgrade User Guide

Modem Reconfiguration Guide - TP-Link 9970

MKTG-101 FTTN & FTTB - TP-Link TD-W9970 - 11.07.2017

Connect your computer to the modem router using one of these options:

Step

• Enter http://tplinkmodem.net or

http://192.168.1.1 in the address bar.

• Type in admin for both the username

and password and click Login.

Step

a. Wired - Connect one end of the

Ethernet cable to the modem and the

other end to the Computer

b. Wireless (Wi-Fi) - Connect wirelessly

by using the default network name

(SSID) and password on the product

label printed on the bottom of the

modem router.

Note: if you have changed the

default network name (SSID) and

password, use your congured

wireless SSID and password to

connect your computer to the

modem router wirelessly.

Ethernet cable

Note: If the login

window does not

appear, please refer to

FAQ -> Q1

Open a web browser on your computer to begin the conguration of the modem router:

From the modem’s conguration menu on the left, click on Network and then

WAN settings. This will bring up the DSL WAN Interface screen.

• Click Add in order to add new VDSL WAN connection for your nbn™ connection,

and proceed to next step.

DSL WAN Interface

Page 3 of 4

nbnTM Service Upgrade User Guide

Modem Reconfiguration Guide - TP-Link 9970

MKTG-101 FTTN & FTTB - TP-Link TD-W9970 - 11.07.2017

2. From the DSL Settings screen, select the following settings as per below screenshot.

• DSL Modulation Type: Auto Sync-up

• Annex Type: Annex A/L

• Enable Bit Swap: leave it checked

• Enable SRA: tick the check box to enable

• Disable AELEM: leave it unchecked if it is available

• Click SAVE

• From the WAN Settings screen, select the following

settings as per screenshot.

• For DSL Modulation Type: VDSL

• Enable Vlan ID: leave it unchecked

• Connection Type: select Dynamic IP

• Enable IPv4: leave it checked.

• Enable IPv6: leave it unchecked

• Click Save. This will then take you back to the DSL

WAN Interface screen.

Step

Note: If you receive an error code, check to see if there is an

existing WAN connection with the name:

• Ipoe_ptm or Pppoe_ptm

• And with an Oin the VP1/VC1 column.

• If so, click Delete in the end column and repeat step 3.

From the DSL WAN Interface screen, you will see a new WAN connection with the name starting with ipoe_ptm.

You have now successfully added a new WAN connection for your nbn™ connection.

Step

6Congure DSL Settings

1. From the modem’s conguration menu on the left,

click on Network and then DSL Settings. The DSL

Settings screen will appear.

Step

WAN Settings

DSL Settings

DSL WAN Interface

Page 4 of 4

nbnTM Service Upgrade User Guide

Modem Reconfiguration Guide - TP-Link 9970

MKTG-101 FTTN & FTTB - TP-Link TD-W9970 - 11.07.2017

• You will now be prompted with the warning

message “Clicking OK will cause a disconnection.

Would like to continue”.

• Click OK to conrm

Step

7tplinkmodem.net says:

Clicking OK will cause a disconnection. Would like to continue

FREQUENTLY ASKED QUESTIONS

1. What can I do if the login window does not appear?

• If the computer is set to a static or xed IP address, change it to obtain an IP address automatically.

• Verify http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web browser and press Enter.

• Use another web browser and try again.

• Reboot your modem router and try again.

• Disable the network adapter used currently then enable it again.

2. What can I do if I cannot access the Internet?

• Check your cables and make sure they are all plugged in correctly, including the telephone line, Ethernet cable and power

adapter.

• Check to see if you can log on to the Web-Management page of the modem router. The default address of the Web-

Management page is http://tplinkmodem.net or http://192.168.1.1. If you can, try the following steps. (If you cannot, please

set your computer to obtain an IP address automatically and then try to access the Internet again.)

3. How do I restore the modem router to its factory

default settings?

• With the modem router powered on, press and hold down the WPS/RESET

Button on the rear panel of the modem router for approximately 5 seconds.

• Log in Web Management page of the modem router, and go to System

Tools->Factory Defaults, click Restore, and then wait until the progress bar

loading nished.

4. What can I do if I forget my password?

Web Management page password:

• Restore the modem router to its factory default settings and then use the default Username ‘admin’ and Password ‘admin’ to

Wireless Network password:

• The factory default password can be found on the product label printed on the bottom of the modem router.

• If you have changed your password, log on to the modem router’s Web Management page, go to Wireless-> Wireless

Security to obtain or reset your password.

Tabla de contenidos

Otros manuales de Módem de TP-Link

TP-Link

TP-Link W8951ND Manual de usuario

TP-Link

TP-Link Archer T6E Manual de usuario

TP-Link

TP-Link TD-8610 Manual de usuario

TP-Link

TP-Link TC-7620 Manual de usuario

TP-Link

TP-Link td-w8970 Manual de usuario

TP-Link

TP-Link TC-7610 Manual de usuario

TP-Link

TP-Link TC-7610 Manual de usuario

TP-Link

TP-Link TD-8616 Manual de usuario

TP-Link

TP-Link TD-VG3511 Manual de usuario

TP-Link

TP-Link TD-W8968 Manual de usuario

TP-Link

TP-Link Archer T600UB Nano Manual de usuario

TP-Link

TP-Link TC7650 Manual de usuario

TP-Link

TP-Link TD-W8960N Manual de usuario

TP-Link

TP-Link Archer T2E Manual de usuario

TP-Link

TP-Link TD-VG3631 Manual de usuario

TP-Link

TP-Link TC-7620 Manual de usuario

TP-Link

TP-Link TD-8610 Manual de usuario

TP-Link

TP-Link MA260 Manual de usuario

TP-Link

TP-Link AV500 Manual de usuario

TP-Link

TP-Link TD-8810 V5 Guía de inicio rápido

TP-Link

TP-Link Deco M5 Manual de usuario

TP-Link

TP-Link TD-8816 Manual de usuario

TP-Link

TP-Link TM-EC5658V Manual de usuario

TP-Link

TP-Link TC-7610 Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario