TP-Link TL-WN881ND Manual de usuario
1 Connect to a Computer
a. Unplug the power cable and remove
the case panel.
Note:
If the bracket is not suitable for your computer, detach it from
the adapter's board and replace it with the low-prole bracket
provided.
b. Locate an available PCI-E slot and carefully
insert the adapter.
c. Connect the antennas to the adapter. d. Replace the case panel, plug in the power
cable and turn on your computer.
Quick Installation Guide
300Mbps Wireless N
PCI Express Adapter
MODEL NO. TL-WN881ND
3Join a Wireless Network
For technical support and other information, please
visit http://www.tp-link.com/support, or simply
scan the QR code.
7106507700 REV2.1.1 ©2017 TP-Link
2 Install Driver
Insert the CD and run the Autorun.exe.
Select TL-WN881ND and follow the
instructions to complete the installation.
Note:
You can also download the driver from the product’s
Support page at www.tp-link.com.
Note:
If you can’t install the driver successfully, disable
the antivirus software and firewall, then try again.
TL-WN881ND
b.
Connections are available
Wireless Network Connection
Connect automatically Connect
√
TP-Link_XXXX
a. Click the network icon ( or ) on the
taskbar.
b. Select your Wi-Fi network, click Connect,
and enter the password when prompted.
For detailed instructions, please refer to the User Manual from
this product’s Support page at www.tp-link.com.
a.
Otros manuales para TL-WN881ND
6
Otros manuales de Hardware de computadora de TP-Link
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
