STEPS FOR FIXING SWITCH ON TO METAL BOX
Install the switch on to the flush mount metal box.
Screw the switch to the metal box ensuring parallel surface of plastic housing on the wall.
Ensure the glass is fixed parallel to the inside switch surface and lock it uniformly in all the corners.
Switch ON the MCB and check the ON/OFF operations of loads.
INSTALLATION STEP
Switch off the power supply through MCB.
Ensure no short circuit of load wires with Neutral or other Phases.
Wire all the loads/fittings as per the wiring diagram.
Use 1.5sq.mm flexible wire for load connections.
Use 2.5sq.mm flexible wire for phase and neutral .
Ensure switch is away by 6 to 10 feet from any CFL or LED lights,
If these light’s rays hit the IR window of switch, it may malfunction or
automatically ON or OFF.
If inverter is installed, connect the primary phase of switch to invertor phase,
connect all the other switch phase terminals to EB power supply.
Install TOYAMA Touchart Blue App into any Phone/Tablet having
android 4.4.4 and above OS,
Configure switches as favorite,
1. Open the app and click on Add key.
2. Long press on the switch and confirm as favorite.
vv
Enter default access code [000000],
1. Click on the switch and enter default access code [000000].
2. Control page appears to control Light/Fan/Curtains.
Configure new access code,
1. Click on bottom KEY icon
5. Repeat steps 1 to 4 for making rooms of all switches.
Option1. Close the APP using task or application Manager.
Option2. Ensure to Clear the total cached data
1. Long press & first key of the device for 6 to 7 seconds until all key’s on glass.
2. Long press of Master ON/OFF key of IR remote until they device LED’s stop blinking.
3. The access code is Reset to default code as [000000].
MOBILE APP MANUAL
2
1
3
4
5
Make rooms,
6
Master reset of access code If the phone is lost or forget the access code,
8
7
Close and restart the App.
7
3. Just touch Master ON/OFF key of the device to confirm the changed access code and save.
