tousek / E_GSM-420-RS868_00 / 07. 05. 2018 - 9 -
SMS Commands / In-, outputs
command entry
16
activation of outputs OUT 1, 2:
pass:password (max. 5 digits)
z: number of concerning output
telephone call
pass,OUT,ON,z,z
e.g. 12345,OUT,ON,1,2
(OUT 1 and 2 are activated)
17
deactivation of outputs OUT 1, 2 [ = ] :
pass:password (max. 5 digits)
z: number of concerning output
telephone call
Note: in the „monostable“ operating mode, this command has no effect since
the shutdown is performed automatically (after 0.5s).
pass,OUT,OFF,z,z
e.g. 12345,OUT,OFF,1,2
(OUT 1 and 2 are deactivated)
18
request status of output OUT 1, 2:
pass:password (max. 5 digits)
answer SMS: „out 1 on (off); out 2 on (off) “ + call
pass,OUT?
19
output relay OUT 1, 2 set to MONOSTABIL [ = ]:
sets the switching behaviour of an output relay to monostable (active for 0,5s).
pass:password (max. 5 digits)
.
z: number of concerning output
pass,OUTRE,z,M
e.g. 12345,OUTRE,1,M
20
output relay OUT 1, 2 set to BI-STABLE:
sets the switching behaviour of an output relay to bistable (ON, OFF).
pass:password (max. 5 digits)
z: number of concerning output
pass,OUTRE,z,B
e.g. 12345,OUTRE,1,B
21
output relay OUT 1, 2 with TIMER:
sets a timer function for an output relay.
pass:password (max. 5 digits)
z: number of concerning output
yyyy: time in seconds (1–9999s)
pass,OUTRE,z,Tyyyy
e.g. 12345,OUTRE,1,T60
22
activation of inputs IN 1, 2:
for activation of one or both inputs.
pass:password (max. 5 digits)
y: number of concerning input
pass,INP,ON,y,y
e.g. 12345,INP,ON,1
(input 1 is activated)
e.g. 12345,INP,ON,1,2
(inputs 1,2 are activated)
23
deactivation of inputs IN 1, 2 [ = ] :
for deactivation of one or both inputs.
pass:password (max. 5 digits)
y: number of concerning input
pass,INP,OFF,y,y
e.g. 12345,INP,OFF,1
(input 1 is deactivated)
e.g. 12345,INP,OFF,1,2
(
inputs 1,2 are deactivated
)
24
set time for suppression of alarm-SMS:
pass:password (max. 5 digits)
y: number of concerning input
mm: time in seconds 00–59
an Alarm-SMS is being sent when the duration of consecutive input
commands are longer than the time which has been set.
pass,INIB,y,mm
25
request input status IN 1, 2:
pass:password (max. 5 digits)
each input is sent together with its number and status
(ON / OFF / Disabled) by SMS.
answer-SMS: „out 1 on (off, disabled); out 2 on (off, disabled) “ + call
pass,STO,IN
26
set an input contact IN 1, 2 N.O. [ = ] or N.C.:
pass:password (max. 5 digits)
y: number of concerning input
m: 1 = N.O. (make contact), 0 = N.C. (break contact)
pass,STO,y,m
27
enter SMS text for input IN 1, 2:
pass:password (max. 5 digits)
txt: text that is assigned to input y(max. 127 digits)
pass,TEXTy,txt
e.g. 12345,TEXT1,text for input 1
