Touch Dynamic EC150 Manual de usuario
0
Revision V1.1 September 2012
EC150 Touch Monitor
1
EC150 Monitor ManualV1.1
Warning! It will cause malfunction if the monitor is operating with unspecified power
supply unit or incorrect power voltage. Do not exposure this unit in the rain or moisture
environment to reduce the risk of fire or electric shock.
Content:
I. FCC Warning Statement................................................................................2
II. Introduction...................................................................................................3
Features.....................................................................................................................3
Unpacking the monitor ...............................................................................................4
III. Installation.....................................................................................................5
I/O placement.............................................................................................................5
To PC.........................................................................................................................6
Touch Driver installation.............................................................................................7
MSR installation (optional) .........................................................................................9
VFD (optional)..........................................................................................................11
Control Buttons ........................................................................................................13
Structure of OSD settings.........................................................................................14
IV. For your safety............................................................................................15
V. Support timing chart:..................................................................................15
VI. Mechanical Dimension................................................................................16
VII. Product General Specification ...................................................................17
2
EC150 Monitor ManualV1.1
I. FCC Warning Statement
WARNING
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Notice:
(1) A Unshielded-type power cord is required in order to meet FCC emission limits and also to
prevent interference to the nearby radio and television reception. It is essential that only the
supplied power cord by used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
3
EC150 Monitor ManualV1.1
II. Introduction
Touch Dynamic’s EC150 is color TFT LCD monitor, integrate with resistive touch, suitable for
many types of applications.
Features
-Optimal display resolution 1024 * 768
-VESA 75 * 75 mm wall mount standard
-Durable and sturdy base design
-Optional 3 tracks Magnetic Strip Reader (MSR)
-Optional Rear Customers Display
-DVI-D or VGA interface
-Serial or USB touch Interface
-Adjustable viewing angel freely up to 90 degrees horizontally
-Low power consumption only 20W with CCFL backlight
4
EC150 Monitor ManualV1.1
Unpacking the monitor
-Put the monitor on a clean surface, make sure the box in upright position.
-Remove packing materials from inside of box.
Check accessory
Please make sure all the accessory are included:
Standard Items
a. b. c.
d. e. f.
Optional Items
g. h.
a. LCD Monitor
b. VGA cable
c. Touch driver / User Manual CD
d. Touch cable（USB or Serial Type）
e. Power adaptor
f. Power cable
g. MSR (USB Interface)
h. Customers Display
5
EC150 Monitor ManualV1.1
III. Installation
I/O placement
1 DC JACK
2 DVI
3 VGA
4 USB B Type
5Dual USB A Type
6 RS232
7 RJ45 (+12V for VFD ONLY )
Warning：Please do not plug non-powered peripheral devices（e.g. printers,
scanners etc）into the powered COM ports- as you can permanently damage your
device!
1
2
3
4
5
6
7
6
EC150 Monitor ManualV1.1
To PC
1. Connect VGA cable from monitor to PC
2. Connect USB touch cable to PC (Connect to the Serial port if you
have serial interface touch)
3. Connect DC plug to monitor and the other side to wall outlet
7
EC150 Monitor ManualV1.1
Touch Driver installation
Please download the driver from Touch Dynamic's website
1. Double click “setup.exe” from driver menu 2. Click “next” from welcome window
3. Click “next” from choose destination location window 4. Click “next” from ready to install the program
5. Click “next” from setup type 6. Click “finish” when setup completed
8
EC150 Monitor ManualV1.1
Calibration procedures:
1. Double click “POS Touch+” icon to run calibration function
2. Follow 9 points linearity calibration procedures and save the data
3. Follow free draw calibration
4. Exit calibration menu
5. Reboot PC
9
EC150 Monitor ManualV1.1
MSR
Screws
MSR installation (optional)
Components of MSR Kit:
1. Open the MSR back cover.
2. Connect the USB cable.
❶
❷
❹
❸
Otros manuales para EC150
1
Tabla de contenidos
Manuales populares de Pantalla táctil de otras marcas
Elecro Engineering
Elecro Engineering Poolsmart Plus Instrucciones de instalación
Johnson Controls
Johnson Controls IQ4 HUB Manual de usuario
Elo TouchSystems
Elo TouchSystems ET2270L Manual de usuario
Elo TouchSystems
Elo TouchSystems ET1002L Manual de usuario
Elo TouchSystems
Elo TouchSystems 3201L Manual de usuario
Duratec
Duratec S15 Manual de usuario
