Toshiba IK-WB81A Manual de usuario
NETWORK CAMERA
Model: IK-WB81A
Quick Start Guide and Important Safeguards
This guide describes the hardware installation.
Refer to the user's manual (PDF le) contained in the CD-ROM for settings, operations
and other information.
The application Adobe® Reader® is needed to view PDF les. If you do not have this
application, download it from the Adobe Systems Incorporated website.
n http://www.adobe.com/
For information on our latest products and peripheral devices, refer to the following
Website:
n http://www.toshibasecurity.com
If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
22
Introduction
FCC (USA)-INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
CAUTION: Your authority to operate this FCC veried equipment could be voided
if you make changes or modications not expressly approved by the party.
Industry Canada -INFORMATION
CAN ICES-3 A / NMB-3 A
3
Thank you for purchasing the IK-WB81A Network Camera. Before using the
camera, read this Quick Start Guide and Important Safeguards carefully to ensure
correct usage. After reading this Quick Start Guide and Important Safeguards,
save it for future reference.
The design, specications, software, and quick start guide contents are subject to
change without prior notice.
Terms
l The term "OS" is used in this manual to indicate operating systems compatible
with this product.
-- Microsoft® Windows® XP xxx Edition
-- Microsoft® Windows Vista® Business Edition
-- Microsoft® Windows® 7 Professional Edition
NOTE
l The performance of the network camera may vary depending on the network
environment.
44
Table of Contents
Introduction....................................................................................................... 2
FCC (USA)-INFORMATION .......................................................................................2
Terms ........................................................................................................................3
Table of Contents.............................................................................................. 4
Important Safeguards ....................................................................................... 5
Important Safeguards (Cont.) ........................................................................... 7
Notes on Use and Installation........................................................................... 8
Setting the Network Camera Environment ....................................................... 9
Items needed for network camera monitoring ...........................................................9
Package Contents .......................................................................................... 10
Physical Description ........................................................................................11
Hardware Installation ..................................................................................... 12
Cabling Assembly .......................................................................................... 14
Network Deployment ..................................................................................... 16
Assigning IP Address ...................................................................................... 18
Retrieving Images........................................................................................... 19
Adjusting the direction and Silica Gel ............................................................. 20
Adjusting the Zoom and Focus ....................................................................... 21
Completion ..................................................................................................... 22
Trademarks .................................................................................................... 23
5
Important Safeguards
1. Read Instructions
Read all the safety and operating instructions before operating the product.
2. Retain Instructions
Retain the safety instructions and user's manual for future reference.
3. Warnings
Comply with all warnings on the product and in the user's manual.
4. Follow Instructions
Follow all operating and use instructions.
5. Cleaning
Disconnect this camera from the power supply before cleaning.
6. Attachments
Do not use attachments not recommended by the camera manufacturer as they may pose
safety risks.
7. Accessories
Do not place this camera on an unstable cart, stand, tripod, bracket or table. The camera
may fall, causing serious injury to a person, or serious damage to the product. Use only
with stand, tripod,bracket,or table recommended by the manufacturer, or sold with the
camera. Any mounting of the product should follow the manufacturer's instructions, and
should use a mounting accessory recommended by the manufacturer.
8. Ventilation
This camera should never be placed near or over a radiator or heat register. If this product
is placed in a built in installation verify that there is proper ventilation so that the camera
temperature operates within the recommended temperature range.
9. Power Sources
This camera should be operated only from the type of power source indicated on the
information label. If you are not sure of the type of power supply at your location, consult
your product dealer.
10. Power-Cord Protection
Power cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Pay particular attention to cords at plugs, screws and
the point where they exit the product.
11. Installation
Install this camera on a secure part of the ceiling or wall. If installed on an unsecured
location, the camera could fall causing injury and damage.
66
12. Lightning
For additional protection on this camera during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the power supply and cable system. This will prevent damage to the camera
due to lightning and power-line surges. If lightning occurs, do not touch the unit or any
connected cables in order to avoid electric shock.
13. Overloading
Do not overload the power supply or extension cords as this can result in a risk of re or
electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this camera through openings as they may touch
dangerous electrical points or short-out parts that could result in a re or electrical shock.
Never intentionally spill liquid of any kind on the camera.
15. Servicing
Do not attempt to service this camera yourself as opening or removing covers may expose
you to dangerous electrical or other hazards. Refer all servicing to qualied service
personnel.
16. Damage Requiring Service
Disconnect this camera from the power supply and refer servicing to qualied service
personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the camera.
c. If the camera has been submerged in water.
d. If the camera does not operate normally by following the operating instructions in the
user's manual. Adjust only those controls that are covered by the user's manual as
an improper adjustment of other controls may result in damage and will often require
extensive work by a qualied technician to restore the camera to its normal operation.
e. If the camera has been dropped or the cabinet has been damaged.
f. When the camera exhibiting a distinct change in performance which indicates a need for
service.
g. Other trouble.
17. Replacement Parts
When replacing parts be sure the service technician uses parts specied by the
manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in re, electric shock or other hazards.
18. Safety Check
Upon completion of any service or repairs to this camera, ask the service technician to
perform safety checks to determine that the camera is in proper operating condition.
7
Important Safeguards (Cont.)
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT SUBMERGE
THIS CAMERA IN WATER.
FIELD INSTALLATION MARKING:
WORDED: “THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”
This product is intended to be supplied by a UL Listed Power Adapter output rated
12 Vdc, minimum 0.8A (for General I/O Terminal Block) or a UL Listed AC Power
Source output rated 24 Vac, 50-60Hz, minimum 0.8A (for General I/O Terminal
Block).
88
Notes on Use and Installation
l Do not aim the camera at the sun
Never aim the camera at the sun even with the camera power off.
l Do not shoot intense light
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe
may appear on the screen. However, this is not a malfunction.
l Treat the camera with care
Dropping or subjecting the camera to intense vibration may cause it to
malfunction.
l Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave
rubber or plastic products touching the unit for a long time. They will leave
marks on the nish. Do not use a chemically saturated cloth.
l Never touch internal parts
Do not touch the internal parts of the camera other than the parts specied.
l Do not submerge in water
The camera has some protection to water (see IP rating), and can be used
indoors or outdoors. If the camera was submerged in water, turn off the power
and contact your dealer.
l Keep the camera installation away from video noise
If cables are wired near electric lighting wires or a TV set, noise may appear in
images. In this event relocate cables or reinstall equipment.
l Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter or colder than the
specied operating range. Doing so could affect the internal parts or cause the
image quality to deteriorate. Special care is required to use the camera at high
temperature and humidity.
l Should you notice any trouble
If any trouble occurs while you are using the camera, turn off the power and
contact your dealer. If you continue to use the camera when there is something
wrong with it, the trouble may get worse and an unpredictable problem may
occur.
99
Setting the Network Camera Environment
Items needed for network camera monitoring
l Administrator's personal computer
The personal computer that allows setting, operating, monitoring and other
functions with the network camera is called the "administrator's personal
computer" in this guide.
* The personal computer for viewing monitored images is called the "user's
personal computer" in this quick start guide. The network camera can be
viewed by more than one personal computer at the same time.
l Recommended personal computer system requirements:
-- Windows® XP, Windows Vista® Business, or Windows® 7 professional.
-- Internet Explorer® Ver 8.0
-- CPU: Intel® CoreTM 2 Duo 2GHz or greater
-- Memory: 1GB RAM or greater
l Connection equipment such as Ethernet cables, and switch or router.
-- The LAN cable type differs depending on the connection method.
l Camera search application "Installation Wizard"
-- Install this application from the CD-ROM supplied as an accessory (Double-click
"Setup.exe" in the CD-ROM and install the application by following the onscreen
instructions.)
-- This application is the tool to discover the IP address of a camera. Using this
application, the IP address of a camera can be easily determined.
1010
2013-02-04
IK-WB81A
IK-WB81A
Ver. WB81-01
l IK-WB81A
l Quick Start Guide and Important
Safeguards
l Sun Shield Kit
Wrench
Tape
Rubber pad
l Waterproof Connector
l AV Out Cable
l CD-ROM
l Alignment Sticker / Silica Gel
l Warranty
Package Contents
l Wall Mount Bracket Kit
Wall Mount Plate
Screw and Anchors Kit
Wrench
l Waterproof Connector for RJ45
Ethernet Enclosure
Tabla de contenidos
Otros manuales de Cámara de seguridad de Toshiba
Toshiba
Toshiba CS3330Bi Manual de usuario
Toshiba
Toshiba IK-TU40A Manual de usuario
Toshiba
Toshiba IK-WB15A - IP Network Camera Manual de usuario
Toshiba
Toshiba IK-1000 - Starlight Color Video Camera CCTV Manual de usuario
Toshiba
Toshiba 6410A - CCTV Camera Manual de usuario
Toshiba
Toshiba IK-TF9C Manual de usuario
Toshiba
Toshiba IK-628A Manual de usuario
Toshiba
Toshiba IK-6550A - Analog Camera, 540 TV Lines Manual de usuario
Toshiba
Toshiba IK-WB21A - IP Network PTZ Camera Manual de usuario
Toshiba
Toshiba IK-540A Manual de usuario
Toshiba
Toshiba IK-TF7 Manual de usuario
Toshiba
Toshiba IK-DF03A Manual de usuario
Toshiba
Toshiba IK-WB02A - PoE Network Camera Manual de usuario
Toshiba
Toshiba IK-6420A Manual de usuario
Toshiba
Toshiba IK-WB80A Manual de usuario
Toshiba
Toshiba IK-WB70A - IP/Network Camera, PoE Manual de usuario
Toshiba
Toshiba IK-WD14A Manual de usuario
Toshiba
Toshiba IK-WB15A - IP Network Camera Instrucciones de instalación
Toshiba
Toshiba CleverDragon CSCV90BC3 Manual de usuario
Toshiba
Toshiba IK-WD05A Manual de usuario
