Toshiba E-STUDIO 2500C Manual de usuario

File No. SME06002500

R060721C4500-TTEC

Ver00_2006-09

Under the copyright laws, this manual cannot be reproduced in any form without prior written

permission of TOSHIBA TEC CORPORATION. No patent liability is assumed, however, with respect

to the use of the information contained herein.

Revision Record

File No. SME06002500

Date Rev.No Item Descriptions Remarks

September, 2006 00 --- Issue of the first version

The Imaging Manual is intended for customers using the Toshiba e-STUDIO2500c/3500c/3510c with a variety

of specific needs and inquiries for high image quality, such as:

xHow to obtain a clearer copy image

xHow to maintain the current image quality

xHow to make the text look sharper on the copy

The Toshiba MFPs are factory-configured to provide image quality settings that satisfy the majority of customers.

However, these settings may not be necessarily optimal for the specific needs of all customers. Proper image

quality adjustments can satisfy such needs. Most of the adjustments described in this manual must be performed

by a service technician, but a few of them can also be performed by the customer.

It is strongly recommended that this manual be fully utilized by not only the service technician, but also the sales

representative, who also has opportunities of obtaining customer feedback on the image quality. This manual

helps the sales representative to study and comprehend what kind of customer requirements for image quality

can be satisfied, to make proposals to customers to improve image quality, and to communicate the customers’

specific requirements with ease to the service technician. In addition, this manual is expected to facilitate the

marketing of Toshiba MFPs to prospective customers that have a specific demand for image quality and the

expansion of sales.

The adjustments described in this manual are all based on the requests of actual customers. Meeting their

specific wishes will only add to their satisfaction.

Please remember to read "Precautions after the completion of the adjustment," to which you must pay close

attention, after finishing the adjustment.

Precautions in Servicing

• For adjustments to be performed by the service technician, the precautions given in the Service Manual must be

stringently followed. The adjustments must be performed by a qualified service technician who has completed

the service training course.

• The default listed mentioned in this manual may be different from the actual ones, due to the timing of shipping

(firmware version). But note that the recommended values and acceptable value range stated in this manual

remain the same.

Purpose of the Imaging Manual

Icons

The following icons used in this manual denote the following:

: • Copy ——— An adjustment having an effect on copying in the Black mode (excluding

the Image smoothing mode)

•Printer ——– An adjustment having an effect on Black and White mode printing

*The adjustment will be effective, if "Black and White" is selected from

among the "Color" options on the Windows printer driver or if "Mono"

is selected from among the "Color Type" options on the Macintosh print

dialog.

•Scan ——— An adjustment having an effect on scanning in the Black mode

: • Copy ——–– An adjustment having an effect on copying in the Image smoothing mode

in the Black mode

• Scan ——— An adjustment having an effect on scanning in the Gray scale mode

: • Copy ——— An adjustment having an effect on copying in the Full color mode

•Printer ——– An adjustment having an effect on full-color printing

*The adjustment will be effective, if "Auto" or "Color" is selected from

among the "Color" options on the Windows printer driver or if "Auto" or

"Color" is selected from among the "Color Type" options on the

Macintosh print dialog.

•Scan ——— An adjustment having an effect on scanning in the Full color mode

: • Copy ——— An adjustment having an effect on copying in the Auto color mode

•Scan ——— An adjustment having an effect on scanning in the Auto color mode

: An adjustment having an effect on printing with the Windows PCL6 emulation printer

driver

: An adjustment having an effect on printing with the Windows PS3 emulation printer

driver

: An adjustment having effect on printing with the Macintosh printer driver

: An adjustment having an effect on an image stored in the e-Filing box by the scanning

functions (including Scan to Box, Scan to File and Scan to E-mail)

: An adjustment having an effect on an image stored in the e-Filing box by the copying

functions (Copy to Box)

: An adjustment having an effect on an image stored in the e-Filing box by the printing

functions (Print to Box)

: An adjustment having an effect on an image stored in the e-Filing box by the Fax and

Internet Fax functions (including Received Fax to Box and Received Internet Fax to Box)

PCL6

PS3

Scan to Box

to Box

Print to Box

Fax to Box

Mac

Purpose of the Imaging Manual

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)

1.1 To Obtain a Darker Image

1.2 To Adjust the Density of an Entire Copy

1.2.1 To Adjust the Density on a Solid Colored Image

1.2.2 To Adjust the Density on a Photo or Gradational Image

1.3 To Achieve the Image Quality Most Suitable for the Paper Used

(To eliminate blur and graininess from an image)

1.4 To Minimize Variations in the Image Quality under the Operating Conditions

(To optimally program image quality control)

1.5 To Correct Out-of-Registration Colors

2. Copier-specific Adjustments

2.1 To Copy Text Clearly (To eliminate faint, smudged or blurred text)

2.1.1 To Adjust the Copy Image Quality in the Black Mode

2.1.2 To Adjust the Copy Image Quality in the Full Color Mode

2.1.3 To Adjust the Copy Image Quality in the Auto Color Mode

2.2 To Closely Match the Color Balance of the Original

2.3 To Improve the Reproducibility of Gray

2.4 To Copy in Vivid Colors

2.5 To Make the Pale Area of the Original Look Darker and Sharper

(To improve the highlight reproducibility)

2.6 To Eliminate the Background Color

2.6.1 To Adjust the Copy Image Quality in the Black Mode

2.6.2 To Adjust the Copy Image Quality in the Full Color Mode

2.7 To Avoid Copying the Image Seen through the Back of a Page Printed on Thin Paper

2.7.1 To Adjust the Copy Image Quality in the Black Mode

2.7.2 To Adjust the Copy Image Quality in the Full Color Mode

2.8 To Eliminate Moiré

2.9 To Copy Sharply (To enhance sharpness)

2.10 To Make Photo Edges Look Softer

2.11 To Make Solid Filled Bold Text (Logo) Highly Colored

2.11.1 To Adjust the Copy Image Quality of a Black Logo

2.11.2 To Adjust the Copy Image Quality of a Colored Logo

2.12 To Sharply Contrast the Hues of Highlighters on the Copy

2.13 To Obtain a Good Color Balance on Thick Paper

2.14 To Obtain Smooth Gray-Scale Photo Images

2.15 To Change the Threshold in Auto Color Mode

(To change the threshold between the Full Color mode and the Black mode to meet the user’s needs)

Table of Contents

2.16 To Adjust the Twin-Color Copy Image Quality

2.16.1 To Adjust the Tint of Colors other than Black

2.16.2 To Adjust the Reproducibility of Black in the Red and Black Mode

2.16.3 To Adjust the Boundary between Black and Colors other than Black

2.17 To Adjust the Image Quality Scanned from the RADF

3. Printer-specific Adjustments

3.1 To Maintain a Steady Color Balance

3.2 To Maintain a Steady Color Balance on Thick Paper or Special Paper

3.3 To Obtain the Desired Color Balance

3.4 To Closely Match the Color Balance on the Monitor

3.5 To Maintain a Uniform Gray Hue

(To maintain Consistency in Gray among Text, Photos and Graphics)

3.6 To Use Only the Black Toner to Reproduce Gray Areas

(To use only the black toner to reproduce black-and-white photos or gradational images)

3.7 To Easily Adjust the Overall Brightness

3.8 To Adjust the Overall Saturation

3.9 To Easily Adjust the Overall Contrast

3.10 To Obtain a Sharper Print Image

3.11 To Obtain a Softer Image

3.12 To Make Low-resolution Data Look Finer (To soften an image)

3.13 To Eliminate Smudges from Highly Colored Text and Lines

(To prevent toner scattering around text and lines where a large amount of toner is used)

3.14 To Clearly Print Light-Colored Thin Lines or Text

3.14.1 To Adjust the Print Image Quality in the Color Mode

3.14.2 To Adjust the Print Image Quality in the Black and White Mode

3.15 To Make the Light-Colored Area Darker on the Printout

3.16 To Clearly Print Thin Lines/Double Lines

3.17 To Decrease the Image Density and Save Toner (To Print in the Toner Save Mode)

3.18 To Adjust the Image Density in the Toner Save Mode

3.19 To Print Illegible Gray or Colored Text in Black

3.20 To Ignore Blank Pages for Printing

3.21 To Sharply Print Black Text

3.22 To Prevent Dark Toner from Coming Off

3.23 To Register the Image Quality Adjusted Corresponding to a Preference

(To use the Custom Color Settings)

3.24 To Print a Full-Color Original in Two Colors

Table of Contents

4. e-Filing-specific Adjustments

4.1 To Clearly Store a B/W Image in the Auto Color Mode

4.2 To Store an Original while Reducing the File Size

4.3 To Store a Color Photo Image, while Minimizing Moiré

4.4 To Match the Color Balance on the Original

(To adjust the color balance in Print to Box)

4.5 To Scan and Print, while Minimizing Moiré

4.6 To Finely Print the Image Stored in the e-Filing box

(To print images stored through Copy to Box or Print to Box)

4.7 To Store an Image Suitable for Displaying on the Monitor or Image Editing

4.8 To Finely Print Color Images Scanned and Stored

(To print images stored through Scan to Box)

5. Scanning-specific Adjustments

5.1 To Clearly Scan Text (To reduce noise around text)

5.2 To Scan an Original, while Eliminating the Background Color

(To eliminate the background density)

5.3 To Clearly Scan and Print an Original in Black and White

(To improve gradation and reduce graininess)

5.4 To Scan the Original, while Reducing the File Size

5.4.1 To Reduce the File Size by Changing the Options when Scanning the Original

5.4.2 To Reduce the File Size in Slim PDF

5.5 To Sharply Scan the Original (To increase the sharpness intensity)

5.6 To Scan an Original, while Enhancing Black

5.7 To Scan an Original with the Desired Gradation

5.8 To Register the Original Mode Optimal for a Particular Type of Original

(To have "Custom" selected)

Table of Contents

iii

e-STUDIO2500c/3500c/3510c

1.1 To Obtain a Darker Image

Before the adjustment After the adjustment

The output image looks light and blurred. The output image looks darker and sharper.

Explanation

When an original containing photo images or gradational images is printed, the output image sometimes looks

light and blurred. Perform image quality control or automatic calibration, and adjust the transfer roller bias

output, in order to obtain a darker and sharper image.

Procedures

*Perform the adjustment in accordance with the procedures below.

*Only the service technician must use procedures (1), (3) and (4).

*Both the service technician and the user can use procedure (2).

(1) Enter adjustment mode [05]. Select code [396]. Press the [START] button.

•Image quality control will be forcibly performed to correct variations in density.

After exercising image quality control, use the next procedure.

(2) Perform automatic calibration to correct variations in image density.

*"ADMIN" is selected from among the "CALIBRATION DISPLAY LEVEL" options by default. In other

words, an administrator is authorized to operate automatic calibration. But "USER" can also be selected to

allow the user to operate it. Refer to the User Functions Guide for further information regarding how to

select the "CALIBRATION DISPLAY LEVEL" option.

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)

1.1

Otros manuales para E-STUDIO 2500C

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Toshiba

Toshiba

Toshiba E-studio 2550c Manual de usuario

Toshiba

Toshiba e-STUDIO 600 Manual de usuario

Toshiba

Toshiba e-studio 166 Manual de usuario

Toshiba

Toshiba e-studio2007 Manual de usuario

Toshiba

Toshiba GA-1200 Manual de usuario

Toshiba

Toshiba e-BRIDGE Re-Rite Manual de usuario

Toshiba

Toshiba E-STUDIO 2303A Manual de usuario

Toshiba

Toshiba e-STUDIO200L/230/280 SERIES Manual de usuario

Toshiba

Toshiba e-studio 202L Manual de lista de piezas

Toshiba

Toshiba e-studio 200s Manual de usuario

Toshiba

Toshiba e-studio202L Manual de usuario

Toshiba

Toshiba E-STUDIO 3500C Manual de instrucciones

Toshiba

Toshiba e-studio 2006 Manual de usuario

Toshiba

Toshiba E-STUDIO 2020AC Instrucciones de funcionamiento

Toshiba

Toshiba E studio 2010C Manual de usuario

Toshiba

Toshiba e-STUDIO556 Manual de usuario

Toshiba

Toshiba e-STUDIO 2303AM Manual de usuario

Toshiba

Toshiba E-studio 281c Manual de usuario

Toshiba

Toshiba e-STUDIO350 Cómo utilizar

Toshiba

Toshiba e-STUDIO 165 Manual de usuario

Toshiba

Toshiba E-studio450 Instrucciones de funcionamiento y seguridad

Toshiba

Toshiba GD-1170 Manual de usuario

Toshiba

Toshiba e-STUDIO 603 Manual de lista de piezas

Toshiba

Toshiba E-STUDIO151 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario