Toro REELMASTER 6500 D Manual de usuario

Page 1 of 263

QUICK SERVICE REFERENCE

Version 14, Jan, 2011

Page 2 of 263

This book is intended to provide easy reference to information most commonly

accessed. Every effort has been made to assure the information provided in this book

is up to date. The most current version of this book can be found on www.toro.com.

Look at revision date on cover page for current version and compare to the version on

website

Part numbers are provided for your convenience, but number changes are common.

Toro part number changes are usually reflected on shipping invoices. However, non-

Toro part number changes (Kohler, B&S, etc.) may occur without notification. Refer to

the proper parts catalog prior to ordering to assure accuracy.

To make this book a desk reference, print it (or only the desired pages), Use a

standard 3 hole punch, and put them into a 1 inch thick 3-ring binder ( 8.5 X 11).

All oils mentioned in this guide are based on Toro engineering specifications. Please

refer to your equipment’s Operators Manual for acceptable substitutes (if any). You

may also refer to Toro’s website for Service Bulletins regarding the use of

Biodegradable oils (listed under General Topics)

The “Charts” indicated for many of the oil listings provide viscosity ratings for different

operating temperatures. All charts are listed in the back of this book (pages 244-254).

All traction units have grease fittings that must be lubricated regularly with No.2

General Purpose Lithium-based grease. If machinery is operated under severe

conditions, lubricate all bearings and bushings more often than normal

recommendations.

IMPORTANT NOTES:

Part numbers, specifications, and lubricants listed herein are subject to change without

notice. Refer to Toro Master Parts Viewer on the internet at www.toro.com for free

online Toro parts catalogs. The current version of this document may be found at

Toro’s Golf or Grounds area of the website under the Education and Technical

Reference section of the Toro Customer Care page.

The most current API Service Grade of oil includes the service properties of earlier

classifications. Refer to the API Motor Oil Guide

at the back of this book for detailed

information on motor oils.

Page 3 of 263

Table of Contents

Serial Number Locations...................................................6-9

Reelmaster®........................................................................10-55

Greensmaster®...................................................................56-91

Groundsmaster®................................................................92-153

Workman® Mid Duty ..........................................................154-167

Workman® Heavy Duty......................................................168-189

Aerators...............................................................................190-207

ProCore® Processor..........................................................208-209

4800 Turf Sweeper .............................................................210-211

Rake-O-Vac®.......................................................................212-213

Pro Force Debris Blower ...................................................214-215

Sand Pro®...........................................................................216-219

Line Painter 1200................................................................220-221

Multi Pro®............................................................................222-233

Foam Marker Kits ...............................................................234-237

Top Dressers, ProPass™, Material Handlers ..................238-247

Engine Oil Viscosity Charts ..............................................248-253

Hydraulic Oil Viscosity Charts..........................................254

Hydraulic Oil Standards Charts........................................255-258

Toro Oil Chart .....................................................................259

API Motor Oil Guide............................................................260-262

Page 4 of 263

Notes

Version 2 changes: Pages 48 & 50; Toro part numbers provided for Air and Fuel

Filters. dated 08/2002

Version 3 changes: Pages 2, 9, 27& 34; Peugeot engine

coolant has changed. The part number has changed from

(93-7213) to (104-8606). dated 03/2010

Version 4 changes: Page 35; Incorrect part number for oil filter on GM 345.

The correct number is FL-100-A. dated 03/2010

Version 4 changes: Page 41; Workman 1100 tire pressure range change.

dated 03/2010

Version 5 changes: All 2003 updates - dated 01/2003

Version 6 changes:All 2004 updates - dated 07/2004

Version 7 changes: All 2005 updates - dated 02/2005

Version 8 changes: All 2006 updates

Version 9 changes: All 2007 updates - includes increased

oil change intervals newer units.

Version 10 changes: All 2008 updates - includes Toro oil

part numbers at the end of the book.

Version 11 changes: All 2009 updates - includes Toro serial number locations.

Version 12 changes: All 2010 updates – dated 02/2010

Version 13 changes: All 2010 updates – dated 06/2010

Version 14 changes: All 2011 updates – dated 02/2011

Page 5 of 263

Important Information on Consumable Items

The normal operating environment of Toro machines can be categorized as off road-

severe duty. In order for equipment to provide continuous service in this type of

environment, regular cleaning and scheduled maintenance must be performed.

Components are designed to provide durability with a minimum amount of

maintenance. Maintenance schedules are developed for each product in an effort to

reduce unexpected failures and down-time. However, components that have constant

contact with the turf environment (i.e. reels, bedknives, blades, rollers, caster wheels,

etc.) are subject to a wide variety of detrimental influences that can accelerate the

need for maintenance and/or repair prior to the recommended schedules. Because of

this, these components (greaseable and non-greaseable) may require additional

repairs as part of maintenance, and should be considered “consumable” items.

For additional information on consumable items, refer to the Toro General Commercial

Products Warranty statement on the rear cover of the Operator’s Manuals or at

www.toro.com.

Page 6 of 263

FINDING YOUR PRODUCT'S MODEL AND SERIAL NUMBER

This is a picture of a Toro model and serial

number plate. You should be able to find

a model and serial number plate that looks

similar to this one on your type of

machine.

Review the sample images below to help

identify the location of the model and serial

number plate on your machine.

Due to the various product configurations

these plates may be placed in a somewhat

protected area (not readily visible). Most

plates will be attached to a main frame

member.

Product Type: Walk-behind

Mowers/Product

How to find the model and serial

number plate:

Look between the wheels on top of the

frame on the back of the machine.

Page 7 of 263

Product Type: Riding Greeensmowers

How to find the model and serial

number plate:

Locations vary on these machines based

on vintage. Check under the seat area or

on the main frame just above the rear

steer wheel, or on the right-hand frame

member near the wheel brake and

somewhat behind and below the driver's

right foot.

Product Type: Workman Vehicles

How to find the model and serial

number plate:

These plates are under the

dashboard area and may be in the

center (as shown) or on either the

right or left-hand side.

Product Type: Multi Pro Sprayers

How to find the model and serial

number plate:

Look for the plate on the left-hand

side of the operator's compartment

(near the driver's left knee area) or

on the chassis near the battery on

the left side.

Page 8 of 263

Product Type: Groundsmasters

and Reelmasters

How to find the model and serial

number plate:

Placement varies based on model.

Look first in the area directly behind

the operator's left knee, on the

firewall.

Another location is on the front

frame extension to the left of the

driver's feet.

Product Type: Other Non-

Riding Product

How to find the model and

serial number plate:

Look on the main frame

structure in and open, yet

damage-protected area.

The ProForce Blower is

shown.

Page 9 of 263

The ProCore 648 Aerator is

shown.

Propass

as shown, is

located on the front LH

side of the unit

Page 10 of 263

Multipro 5800 as shown, is

now located above the step

plate on the LH side of the

machine

Groundsmaster 360 is located

directly infront of the steering

column

Otros manuales para REELMASTER 6500 D

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cortacésped de Toro

Toro

Toro Recycler II ProLine 21 Manual de usuario

Toro

Toro TimeCutter 4225 Instrucciones de instalación y funcionamiento

Toro

Toro 30353 Manual de usuario

Toro

Toro Groundsmaster 4000-D Manual de usuario

Toro

Toro 30934 Manual de usuario

Toro

Toro Recycler 20372 Manual de usuario

Toro

Toro Z580-D Z Master 74266 Manual de usuario

Toro

Toro Groundsmaster 4300-D Manual de usuario

Toro

Toro Z Master 74902TE Manual de usuario

Toro

Toro Groundsmaster 360 Manual de usuario

Toro

Toro GreensPro 1200 Manual de usuario

Toro

Toro Greensmaster 3250-D 04383 Manual de usuario

Toro

Toro Groundsmaster 4000-D Manual de usuario

Toro

Toro Z Master Professional 3000 Series Manual de usuario

Toro

Toro 74776 Manual de usuario

Toro

Toro TimeCutter Manual de usuario

Toro

Toro TimeCutter SW 4200 Manual de usuario

Toro

Toro 4383 Manual de usuario

Toro

Toro TurfMaster 22205TE Manual de usuario

Toro

Toro GrandStand 18850TE Manual de usuario

Toro

Toro 30645 Manual de usuario

Toro

Toro Sand Pro 3040 Manual de usuario

Toro

Toro TimeCutter 77301 Manual de usuario

Toro

Toro Proline 30187 Manual de usuario

Manuales populares de Cortacésped de otras marcas

RHINO

RHINO 1958 Manual de usuario

Wolf Garten

Wolf Garten Compact plus 40 B Manual de usuario

Cub Cadet

Cub Cadet LTX 1045 Manual de usuario

Craftsman

Craftsman 917.378461 Manual de usuario

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manual de usuario

Challenge

Challenge CH18V2 Instrucciones de operación

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manual de usuario

DEWEZE

DEWEZE ATM-725 Manual de operación

Weed Eater

Weed Eater 180083 Manual de usuario

Husqvarna

Husqvarna Poulan Pro PP185A42 Manual de usuario

Better Outdoor Products

Better Outdoor Products Quick Series Manual de usuario

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manual de funcionamiento

MTD

MTD 795, 792, 791, 790 Manual de usuario

Dennis

Dennis FT 610 Manual de usuario

AIRFORCE

AIRFORCE F-15 Gen 3 Manual de usuario

MTD

MTD 126-220-000 Manual de usuario

Stihl

Stihl RMA 443 PV Manual de usuario

Yard-Man

Yard-Man 3700-0 Manual de usuario