Tork 86ECO Instrucciones de construcción

Washroom DispenserService and Parts Manual

Tork Electronic Hand Towel Roll Dispenser

86ECO

RevisionDate: 10-8-19

Essity Internal

Tork Hand Towel Roll

Dispenser

(Electronic,Touch- Free):

H21 System:86ECO (Smoke)

Roll Towel Product Options:

RB350A (Tork Advanced,350’,

hite)

RB600(Tork Advanced,600’,

hite)

RB800(Tork Advanced,800’,

hite)

RB351(Tork Universal,350’,

hite)

RB6002 (Tork Universal,600’,

hite)

RB8002 (Tork Universal,800’,

hite)

RB8004 (Tork Universal,800’,

hite)

RB10002(Tork Universal,1000’,

hite)

RK350A(Tork Universal,350’, Natural)

RK600E(Tork Universal,600’, Natural)

RK800E (Tork Universal, 800’, Natural)

RK8002 (Tork Universal, 800’, Natural)

RK1000 (Tork Universal, 1000’, Natural)

214250 (Tork Universal, 425’, Natural White)

214404 (Tork Advanced, 1,000’, White)

214650 (Tork Universal,425’White)

218004 (Tork Universal, 800’, Natural White)

Specifications

Dispenser Size

Outer Case Size

SCC Code

Case

Weight

Case

Cube

Pallet Configuration

(ti x hi)

11.78" X 9.12" X 14.39"

12.75 x 10.75 x 14.5

10073286622461

4.1

1.15

9 x 9 = 81 units

DispenserParts

Part Description ReplacementSKU

LOCK FINGERS LOCKINSERT

LEFT HUB ARM

RIGHT HUB ARM

86ECO COVER 86ECO COVER

BUSINESSCARD

HOLDER

#14 DISP KEY AND

LOCK FINGERS

#14 KEY

of6

Washroom DispenserService and Parts Manual

Tork Electronic Hand Towel Roll Dispenser

86ECO

RevisionDate: 10-8-19

of6

Essity Internal

Part

Description

with

Replacement

Instructions

Parts with SKUs listed are availablefor order from as of the revision date on the manual. Contact an

EssitySales Rep or the EssityQualityCoordinatorto order these parts.

If no SKU is listed, the

availability

of the part is unknown. Please contact the EssityQuality

Coordinatorfor more information(see Contacting Essitysection).

Replacement

SKU

Description

Replacement

Instructions

LOCKINSERT

LOCK FINGERS

Unmounting

the dispenseris requiredto remove the lock fingers. Locatethe

tabs that secure the lock fingers on the back of the dispenser. Bendthe tabs to

a position in which the fingers can be removed.

LEFT HUB ARM

RIGHT HUB ARM

Unmounting

the dispenseris requiredto remove the arms. Pinch the plastic

tabs on the back of the dispenser together while pulling arm from front.

Replacement

arms can be snapped into place from the front of the dispenser.

86ECOCOVER

86ECO COVER

Pull one side awayfrom back until hinge pivot clears back. Then pull other side

pivot awayfrom back and removecover.

#14 KEY

#14 DISP KEY

Washroom DispenserService and Parts Manual

Tork Electronic Hand Towel Roll Dispenser

86ECO

RevisionDate: 10-8-19

of6

Essity Internal

DispenserInstallation and Mounting

MountingHeight

The lower part of the dispensershould be mounted 53”(135 cm) from the floor. Consult all appropriate

buildingcodes for mounting

requirements

that meet ADA or Title 24 guidelines.

Washroom DispenserService and Parts Manual

Tork Electronic Hand Towel Roll Dispenser

86ECO

RevisionDate: 10-8-19

of6

Essity Internal

Battery

Installation

Paper Loading Instructions

1. Open the cover and prepareto load paper on hubs.

2. Free paper from roll, and positionroll so paper drapes from

underneath

the back of the roll.

3. Feed paper over top roller and betweentop and bottom roller.

Manually

turn top roller to engage paper between rollers.

5. Close cover. Dispenserwill feed first sheet. Dispenseris readyfor use.

Preventive

Maintenance

The dispensershould be cleaned any time there is heavypaper dust build-up inside the dispenser. If

paper dust is not a problem,

approximately

every year is a good

frequency

for cleanings. The followingis

the

recommended

procedureto cleaning:

1) Open the dispenserand removethe roll of paper. Clear all paper from the feed assembly.

2) Clean out anypaper dust. This can be done is several ways, such as, vacuuming,blowing out with a

can of

compressed

air (wear safetyglasses), wiping out with a damp cloth, etc.

3) Clean the cover with a general all-purposecleanerthat is safe for plastics.

Washroom DispenserService and Parts Manual

Tork Electronic Hand Towel Roll Dispenser

86ECO

RevisionDate: 10-8-19

of6

Essity Internal

Troubleshooting

This dispenseroperates in towel hang mode only. A towel will be present at all times. The mechanism

will be activatedand dispensea new towel onlyafter the present towel has been torn off and removed.

If no towel presents itself after loading paper, remove paper roll, removeand reinsert batteries, waiting 5

seconds between removaland re-inserting. Re-install roll and close cover.

If still no dispensing,removebatteries and replace with new batteries.

If problemsstill persist, please contact Essity.

ContactingEssity

Problem: Anyother problem not stated above

•

Contact the EssityQualityCoordinator.

•

Dial

1-866-722-8675,

press option 6

•

Please have dispenser date code available

Product Code Date Location: Open dispenser, note the date code stamps (2) on the top, right side of

the dispenser back wall for circles (like shown below) molded into unit. The circles will show the month

and year circle. Please have these available when contactingthe EssityQualityCoordinator.

To contact the EssityQuality

Coordinator,

dial

1-866-722-6659

and press option 6.

of6

Essity Internal

Washroom Dispenser Service and Parts

Man

Tork

Electronic HandT

owe

Roll

Dispenser

86ECO

Revision

Date: 10-8-19

Essity Internal

86ECO Tork Electronic HWRT

Dispenser

Backplate

Template

------------

_:_:

---

[

Tabla de contenidos

Otros manuales de Dispensador de Tork

Tork

Tork 99A Instrucciones de construcción

Tork

Tork 209303A Instrucciones de construcción

Tork

Tork S1 System Instrucciones de construcción

Tork

Tork S2 Manual de usuario

Tork

Tork 461123 Manual de usuario

Tork

Tork 6521281 Instrucciones de construcción

Tork

Tork Image Design Tork 466100 Manual de usuario

Tork

Tork Express 460004 Manual de usuario

Tork

Tork Tork Matik 551102 Manual de usuario

Tork

Tork Matic Elevation H1 Manual de usuario

Tork

Tork 570020A Instrucciones de construcción

Tork

Tork Matic H1 Instrucciones de construcción

Tork

Tork TREA 0060 Manual de usuario

Tork

Tork 555520A Instrucciones de construcción

Tork

Tork Matic Manual de usuario

Tork

Tork Elevation T2 Mini JBT Series Instrucciones de construcción

Tork

Tork Xpressnap N4 Manual de usuario

Tork

Tork Image Design Matic 460001 Manual de usuario

Tork

Tork Elevation H2 Xpress Instrucciones de construcción

Tork

Tork Essity Image Design 466000 Manual de usuario

Tork

Tork TRK565828 Manual de usuario

Tork

Tork Elevation H2 Xpress Mini Instrucciones de construcción

Tork

Tork Image Design 460013 Manual de usuario

Tork

Tork Performance Maxi W2 Instrucciones de construcción

Manuales populares de Dispensador de otras marcas

Silver King

Silver King Majestic SK12MAJ Guía de inicio rápido

Franke

Franke F3Dn Twin Manual de usuario

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manual de usuario

DAN DRYER

DAN DRYER 282 Manual de usuario

Essity

Essity Tork 473208 Manual de usuario

CBS

CBS SD300BU-88 Guía de configuración

Sealey

Sealey MK77 Manual de usuario

Fluid Management

Fluid Management Accutinter 1600 Manual de usuario

Franke

Franke DVS SD99-010 Manual de usuario

Graco

Graco Dispensit 1053-10C Guía de solución de problemas

ITALTINTO

ITALTINTO i50 Manual de usuario

Coca-Cola

Coca-Cola FREESTYLE 9000 Manual de usuario

Graco

Graco ProMix 2KE Manual de instrucciones

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manual de usuario

Wayne

Wayne GLOBAL VISTA CNG Manual de usuario

clarsen

clarsen H133 Manual de usuario

PicoBrew

PicoBrew Zymatic Manual de usuario

BOWMAN

BOWMAN BP-007 Manual de usuario