Tork 570020A Instrucciones de construcción

Washroom Dispenser Service and Parts Manual

Tork Elevation Soap Liquid Dispenser

570020A; 570028A Revision Date: 3-17-15

1 of 6

Tork Elevation Liquid Soap Dispenser:

S1 System: 570020A (white); 570028A (black)

Dispenser Dimensions HxWxD Inches (cm):

11.5 x 4.4 x 4.5 (29.1 x 11.2 x 11.4 cm)

Soap Product Options (1 L bottles):

400011 - Tork Premium Extra Mild Liquid Soap

400012 - Tork Premium Luxury Soft Liquid Soap

400013 - Tork Premium Hair and Body Liquid Soap

400014 - Tork Premium Extra Hygiene Liquid Soap

400015S Tork Premium Liquid Soap Antibacterial with

0.3% Triclosan

400015SC Tork Premium Liquid Soap Antibacterial with

0.3% Triclosan (Canada Only)

400016 - Tork Premium Alcohol Gel Hand Sanitizer

Dispenser Parts

Part Description Replacement SKU

Part Description with Replacement Instructions

PUSH BUTTON - WHITE

205602

PUSH BUTTON - BLACK

205603

KEY FOR TORK

DISPENSER

200260 KEY

SOAP PUMP (GREY

CAP & BLACK RUBBER)

252380-02 NEW

ELEVATION LOCK -

WHITE

205502

ELEVATION LOCK -

BLACK

205503

Washroom Dispenser Service and Parts Manual

Tork Elevation Soap Liquid Dispenser

570020A; 570028A Revision Date: 3-17-15

2 of 6

Parts with SKU numbers are available for order as of the revision date on the manual. Contact an SCA

Sales Rep or the SCA Tissue Quality Coordinator to order these parts.

Replacement SKU Description & Replacement Instructions

252380-02 NEW

RUBBER PUMP NOZZLE

The rubber pump nozzle screws onto the top of the soap bottles. The nozzle and

soap bottle are then installed into the dispenser. See the Loading Instructions

section for more details.

205602 White

205603 Black

PUSH BUTTON (WHITE OR BLACK)

The user presses the pump handle to dispenser soap. Open cover. Press pin on

either side to release from base. Other pin will release easily. Snap new button in

place.

205502 White

205503 Black

ELEVATION LOCK (WHITE OR BLACK)

The lock can be replaced by pressing the plastic tabs on each side to free the lock

from the opening.

200260 KEY

METAL KEY FOR TORK DISPENSERS

Mounting and Filling Instructions

Installation instruction sheet and mounting template are provided inside each carton.

Washroom Dispenser Service and Parts Manual

Tork Elevation Soap Liquid Dispenser

570020A; 570028A Revision Date: 3-17-15

3 of 6

Washroom Dispenser Service and Parts Manual

Tork Elevation Soap Liquid Dispenser

570020A; 570028A Revision Date: 3-17-15

4 of 6

Preventive Maintenance

Clean the cover with a general all-purpose cleaner that is safe for plastics. Do not use abrasives.

Dispenser is not dishwasher safe. Dispenser can be completely disassembled for cleaning, if necessary.

Troubleshooting

Problem: Soap bottle is collapsing inside dispenser, preventing bottle from completely dispensing.

This is a known issue being caused by the bottle and nozzle attachment being air-tight. Until this

is corrected with a redesign, the recommended method to avoid this problem is to poke a small

hole in the bottle to equalize the pressure inside the bottle. After the bottle and nozzle have been

installed in the dispenser, poke a small hole anywhere above the soap line. The plastic is thinner

on the side of the bottle compared to the bottom of the bottle, so making the hole on the side of

the bottle (somewhere above the soap line) is recommended. Some sort of hand protection (ie.

cutting gloves) is strongly recommended when making the hole.

Problem: Any other problem not stated above.

Contact the SCA Tissue Quality Coordinator.

Contacting SCA

To contact the SCA Tissue Quality Coordinator, dial 1-866-722-6659 and press 6.

Product Date Code Location: The assembly date code for the product can be found on the TorkSelect

label affixed to the inside back of the dispenser.

Washroom Dispenser Service and Parts Manual

Tork Elevation Soap Liquid Dispenser

570020A; 570028A Revision Date: 3-17-15

5 of 6

570020A –570028A Tork Liquid Soap Dispenser

Mounting Hole Dimensions (mm)

Alternate Mounting (using double-sided tape)

The dispenser is supplied with double-sided tape as an alternative mounting method.

1. Apply to clean and dry surface

2. Remove protection sheet

3. Press on firmly

4. Wait 30 minutes before loading bottle

Washroom Dispenser Service and Parts Manual

Tork Elevation Soap Liquid Dispenser

570020A; 570028A Revision Date: 3-17-15

6 of 6

Recommended Mounting Height (standard access)

Mount soap dispenser 6” (15cm) above sink or counter surface.

Recommended Mounting Height (ADAAG Guideline)

Maximum Forward Reach over an Obstruction

The maximum level forward reach over an obstruction with knee space below is 25 inches (635 mm).

When the obstruction is less than 20 inches (510 mm) deep, the maximum high forward reach is 48

inches (1220 mm). When the obstruction projects 20 to 25 inches (510 mm to 635 mm), the maximum

high forward reach is 44 inches (1120 mm). (4.2.5, 4.25.3).

Note: Compliance with ADA guidelines is the responsibility of the installer and building owner. Local and

state requirements may differ from ADAAG guidelines.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Dispensador de Tork

Tork

Tork Elevation H2 Xpress Mini Instrucciones de construcción

Tork

Tork S1 System Instrucciones de construcción

Tork

Tork 461123 Manual de usuario

Tork

Tork Elevation T2 Mini JBT Series Instrucciones de construcción

Tork

Tork Essity Image Design 466000 Manual de usuario

Tork

Tork Matic H1 Instrucciones de construcción

Tork

Tork Image Design 460010 Manual de usuario

Tork

Tork Matic Manual de servicio

Tork

Tork Matic Elevation H1 Manual de usuario

Tork

Tork Matic Manual de usuario

Tork

Tork 654021 Instrucciones de construcción

Tork

Tork S2 Manual de usuario

Tork

Tork Image Design Matic 460001 Manual de usuario

Tork

Tork Image Design 460013 Manual de usuario

Tork

Tork 555520A Instrucciones de construcción

Tork

Tork Image Design 460010 Manual de usuario

Tork

Tork 93T Guía

Tork

Tork Xpressnap N4 Manual de usuario

Tork

Tork 6521281 Instrucciones de construcción

Tork

Tork S4 Intuition Manual de usuario

Tork

Tork 209303A Instrucciones de construcción

Tork

Tork Matic Manual de usuario

Tork

Tork 86ECO Instrucciones de construcción

Tork

Tork 572028A Manual de usuario

Manuales populares de Dispensador de otras marcas

Silver King

Silver King Majestic SK12MAJ Guía de inicio rápido

Franke

Franke F3Dn Twin Manual de usuario

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manual de usuario

DAN DRYER

DAN DRYER 282 Manual de usuario

Essity

Essity Tork 473208 Manual de usuario

CBS

CBS SD300BU-88 Guía de configuración

Sealey

Sealey MK77 Manual de usuario

Fluid Management

Fluid Management Accutinter 1600 Manual de usuario

Franke

Franke DVS SD99-010 Manual de usuario

Graco

Graco Dispensit 1053-10C Guía de solución de problemas

ITALTINTO

ITALTINTO i50 Manual de usuario

Coca-Cola

Coca-Cola FREESTYLE 9000 Manual de usuario

Graco

Graco ProMix 2KE Manual de instrucciones

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manual de usuario

Wayne

Wayne GLOBAL VISTA CNG Manual de usuario

clarsen

clarsen H133 Manual de usuario

PicoBrew

PicoBrew Zymatic Manual de usuario

BOWMAN

BOWMAN BP-007 Manual de usuario