Toptech TT-RIS-251W Manual de usuario

OPERATING MANUAL

Caution:

Equipment damage hazard

Do not operate the cooling

system if the outdoor

temperature is below 50˚ F

(10˚ C) to prevent possible

compressor damage.

Quick Reference

Mounting Locations

Mounting Options

Installing Batteries

New Features On T955W

Contact Information & Warranty

Congratulations on purchasing a

TopTech Wireless System.

This remote sensor was designed to the

highest reliability and ease of use standards.

Thank you for choosing TopTech.

® U.S. Registered Trademark. Patents pending.

Table of Contents Page

Need Help?

For assistance with this product please

visit http://toptech.pro1iaq.com or call

TopTech Customer Care toll-free at

888-776-1427 during normal business

hours (Mon-Fri 9 AM - 6 PM Eastern)

Una versión española de este

manual puede ser descargada

en http://toptech.pro1iaq.com

This manual covers TopTech models:

TT-RIS-251W (Requires TT-S-955W)

R251W (Requires T955W)

Wireless Range

Range between the R251W and the T955W master

thermostat is up to 100 feet with no obstructions and

up to 50 feet in standard residential metal, brick, and

concrete construction.

Run Key

RUN only shows if the

remote sensor setpoint

has been changed.

Pressing RUN will cancel

the temporary setpoint hold.

Note: The SHOW SET must

be set to YES in tech setup

menu before the RUN key

will be shown in the display.

Wireless Icon

Remote Label

Each indoor remote

sensor can be labeled.

The label options can be

found during tech setup.

Getting to know your

indoor remote sensor R251W

LCD

Remote Name

Run and Clean Keys

Temperature

Setpoint Keys

Temperature

Indicates the current

ambient temperature.

Glow in the Dark

Light Button

Low Battery Indicator

Replace batteries when

this indicator is shown.

Clean Key

Pressing the CLEAN key

will allow 30 seconds to

clean the display. The keys

will be inoperable during

this time. NOTE: The Show

Set mode must be set to

YES in tech setup menu

before the CLEAN key will

be displayed.

NOTE ABOUT THE LIGHT BUTTON:

This button is used to light up the

display. DO NOT hold the light button

down for longer than 3 seconds or you

will enter the technician setup screens.

If you inadvertently enter the tech

setup press and release the light button

a second time to exit the tech screens.

NOTE ABOUT SETPOINT, RUN AND

CLEAN KEYS: These keys will only be

shown if they have been turned on in

Technician Setup menu.

Setpoint Temperature

Displays the user selectable

setpoint temperature.

Setpoint Adjustment Keys

NOTE: The SHOW SET must

be set to YES in tech setup

menu before the setpoint

keys will be shown in the

display.

Mercury Notice:

All of Pro1’s products are mercury free.

However, if the product you are replacing

contains mercury, dispose of it properly.

Your local waste management authority

can give you instructions on recycling

and proper disposal.

MOUNTING LOCATIONS

Wireless Range

Range between the R251W and the T955W master thermostat is up to 100 feet

with no obstructions and up to 50 feet in standard residential metal, brick, and

concrete construction.

The remote sensor should be mounted or placed approximately 4 to 5 feet above the

floor. Select an area with average temperature and good air circulation.

Do not mount or place Remote Sensors in locations:

• Close to hot or cold air ducts

• That are in direct sunlight

• With an outside wall behind the thermostat

• In areas that do not require conditioning

• Where there are dead spots or drafts (in corners or behind doors)

• Where appliances could radiate heat

• Do not set it next to or on hot appliances

• Do not put it in your pocket or hold in your hands for a long period of time.

Body heat will distort the temperature reading.

Remote Sensor Locations

NO NO YES

MOUNTING OPTIONS

Wall Mount - Removeable

Desk or Counter Option

Mount T-bracket on the Wall.

1Slide the T-bracket

up into the slot

holders.

2T-bracket will stop

on the top of the

slot holders.

2Slide the Remote Sensor over

the mounted T-bracket.

Wall mount

slot holders.

T-bracket

mounted on

the wall

Back View

of Subbase

of Remote

Sensor

T-bracket

Wall

mount

slots

Wall Mount - Permanent

1Remove the R251W from the subbase. 2Mount subbase

to the wall

Inside View

of Subbase

of Remote

Sensor

Inserting Batteries for Permanent Wall Mount

1Remove the R251W from

the subbase. The R251W is

held on the subbase by a

plastic tab on the bottom

of the remote sensor.

Push in with a small flat

head screwdriver to remove

the R251W from the subbase.

Installing Batteries for Temporary Wall Mount or Table Placement

1Use the finger tab on the back of the

remote to remove the battery door. 2Once you have removed the door from the back

of the remote, insert 2 AA Alkaline batteries and

replace the battery door.

INSTALLING BATTERIES

Once you have

removed the R251W

from the subbase,

insert 2 AA Alkaline

batteries.

3Attach the R251W

to the subbase by

aligning the two top

tabs and then close

as shown.

Bottom of

Remote Sensor

Top tabs

Swing closed

Inside viewReset button

NEW FEATURES ON T955W

New Features on the T955W After R251W is Connected

Example of programming a priority for the SLEEP time period:

In this example system we have 1 T955W on the main floor and 1 R251W in the Master Bedroom on the 2nd

floor. During the setup process the R251W was named Bedroom 1. During WAKE, LEAVE and RETURN, the

program should remain on system average. When on the SLEEP time period during programming, press

NEXT ZONE until Bedroom 1 shows. During the SLEEP time period the other remotes in the house will be

ignored and the system will be controlled only by the ambient temperature of the R251W in the master

bedroom. The WAKE, LEAVE and RETURN temperature will be controlled by the system average.

NEXT ZONE KEY SETPOINT NOT DISPLAYED

THERMOSTAT HOLD (PERMANENT) TEMPORARY HOLD (4 HOURS)

NEXT ZONE key cycles

through ambient temperatures

for connected zones.

Setpoint will only be displayed for the

zone currently being used by the

program or in hold. Press the or

to show the setpoint for adjustment.

To put the thermostat into hold

select system average or the zone

you want to hold. Then use the

arrows to adjust the setpoint.

Then press the HOLD key.

REMOTE: Indicates the T955W is in

temporary hold. The setpoint will now

display the temporary override setpoint.

The name of the

remote sensor will

be displayed.

In this example, it is

REMOTE 2.

HOLD: Indicates

the T955W is in

permanent HOLD.

A permanent

HOLD can be

active for system

average, local, or

any R251W.

Run Schedule:

Will cancel any

holds and return

the system to the

program.

Run Schedule:

Will cancel any

holds and return

the system to

the program.

In this example,

the name of the

zone currently

having priority is

SYSTEM AVERAGE.

System average

is the average of all

connected sensors.

Local is the ambient

temperature of the

T955W.

The name of the

R251W can be

displayed. This

shows it has priority.

CONTACT INFORMATION & WARRANTY

Warranty Registration:

Your new Pro1 thermostat has a 5 year limited warranty. You must register your warranty

within 60 days of installation. You can register your new thermostat in 2 ways.

Go to www.pro1iaq.com, select warranty registration and fill out a short registration form.

-or-

Complete the form below and mail it to the address shown.

Name: ____________________________

Address: ____________________________

____________________________

City: ____________________________

State: ____________________________

Zip: _____________________

Thermostat Model: _____________________

Date Installed: _____________________

Pro1 IAQ Warranty Registration:

Pro1 IAQ Inc.

1111 S. Glenstone

Suite 2-100

Springeld, MO 65804

Toll-free: 1-888-Pro1iaq (776-1427)

Toll Number (Outside the USA): 330-821-3600

Web: http://www.pro1iaq.com

Hours of Operation: Monday - Friday 9 AM - 6 PM Eastern

Complete form and mail to:

Pro1 IAQ Inc.

1111 S. Glenstone

Suite 2-100

Springeld, MO 65804

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Termostato de Toptech

Toptech

Toptech TT-S-855C Manual de usuario

Toptech

Toptech True Comfort IIII TT-S-955 Manual de usuario

Toptech

Toptech TT-N-751H Manual de usuario

Toptech

Toptech TT-N-411 Manual de usuario

Toptech

Toptech TT-S-755 Manual de usuario

Toptech

Toptech T955WH Manual de usuario

Toptech

Toptech TRUE COMFORT III TT-S-925 Manual de usuario

Toptech

Toptech TRUE COMFORT III TT-S-855 Manual de usuario

Toptech

Toptech TT-P-411 Manual de usuario

Toptech

Toptech TT-N-751 Manual de usuario

Toptech

Toptech TT-N-851 Manual de usuario

Toptech

Toptech TT-S-755H Manual de usuario

Toptech

Toptech TT-N-421 Manual de usuario

Toptech

Toptech TT-N-701 Manual de usuario

Toptech

Toptech truecomfort iii Manual de usuario

Toptech

Toptech TT-N-851 Manual de usuario

Toptech

Toptech TT-P-421 Manual de usuario

Toptech

Toptech TT-N-721 True Comfort III Manual de usuario

Toptech

Toptech TT-N-705 Manual de usuario

Toptech

Toptech TT-S-755 Manual de usuario

Toptech

Toptech TT-S-915 Manual de usuario

Toptech

Toptech TT-S-925 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario