In this mode, when pedaling, the motor will provide power synchronously, and the
status area will showing . When you stop pedaling or braking, the power will
automatically cancel.
(2) PASA- stepless power assist
Topshine motor controller provides an advanced stepless power assist mode for
riding on different road and slope. In this mode, we can adjust assist power by turning
throttle according to different type of road and slopes, The operation method: turning
the throttle and pedaling at the same time. When you feel that the pedal force meet
with your requirements, release the throttle. Then system will automatically remember
now power level and output it when next pedaling.
(3) Active cruise
When work in power assist mode, Topshine motor controller also provides a unique
mode of cruise, During pedaling, when feel fatigue, we can operate enter the cruise
mode let the body rest, The operation method: turn the throttle ,When the bike
reaches your desired speed, then keep pealing and release the throttle within 5
seconds, then the bike enters cruising mode. status area of the screen will show
, any brake will exit this cruise mode.
(3) ICS - inertial cruising system
ICS mode was invented by Topshine company, ICS provide a simplification of the
original cycling way, by this mode you can enjoy the ebike driving as riding a
traditional bicycle, just pedaling without any of other operating, The operation
method: press M key to select ICS mode, and pedaling, when reach the speed what
you need, then stop pedaling, it will keep cruising with this speed, and screen will
show . If you need to accelerate, just keep pedaling, stop pedaling and it will
continue cruising at your new speed. Any braking or operating throttle it will
automatically exit this mode.
(4) OFF-Close the power
After switching to OFF mode, TSGB02 will turn off all power assist and ICS, but the
throttle still active, this mode suitable for outdoor sports
4. Altitude: In meters.
5. Ambient temperature: Ambient temperature. Range: -30 ~ 120℃.
6. Mileage: accumulates from the factory and can be reset to zero.
7. Electronic compass: when the vehicle speed is over 0KM/h and the GPS signal is
valid, it will update the direction in real time, and it will not update when stopping.
