Topfield TF 7010 HT Manual de usuario
TOPFIELD
TF 7010 HT
User Guide
High Definition
Digital Terrestrial Receiver
Contents iii
Contents
1 Introduction 1
1.1 Features ............................... 1
1.2 Controlling the digital receiver .................. 2
1.2.1 The front panel ....................... 3
1.2.2 The remote control ..................... 4
2 Setup 6
2.1 Unpacking .............................. 6
2.2 Safety precautions ......................... 6
2.3 Rear panel connections ....................... 8
2.4 Connecting up your digital receiver ............... 9
2.4.1 Connecting the antenna .................. 9
2.4.2 Connecting to your television .............. 9
2.5 Switching on for the first time ................... 12
2.5.1 Inserting batteries in the remote control ......... 12
2.5.2 Powering on and checking picture ............ 12
3 Preference Settings 14
3.1 Language settings .......................... 14
3.2 Video and audio settings ...................... 16
3.2.1 Television aspect ratio ................... 16
iv Contents
3.2.2 High definition television ................. 17
3.2.3 Audio mode ........................ 17
3.3 Local time setting .......................... 18
3.4 Parental control ........................... 20
3.5 Adjusting the on-screen display .................. 21
4 Service Search 23
4.1 Searching broadcasting services .................. 23
4.2 Resetting to factory settings .................... 24
5 Daily Usage 25
5.1 Volume control ........................... 25
5.2 Watching television ......................... 25
5.2.1 The services list ....................... 25
5.2.2 The favourite services list ................. 26
5.2.3 Viewing programme information ............ 28
5.2.4 Selecting audio tracks ................... 28
5.2.5 Selecting subtitle tracks .................. 29
5.2.6 Viewing teletext ...................... 29
5.3 Viewing electronic programme guide .............. 29
5.4 Watching multifeed programme ................. 31
5.5 Making timer events ........................ 31
6 Listing Services 34
6.1 Editing the favourite list ...................... 34
6.2 How to use on-screen keyboard .................. 36
6.3 Transferring receiver data ..................... 36
7 Firmware Update 38
7.1 Checking the firmware information ............... 38
7.2 From your computer via RS-232 port ............... 39
7.3 From another digital receiver via RS-232 port .......... 40
Contents v
Index 41
1
Chapter 1
Introduction
The TF 7010 HT digital receiver is fully compliant with the
international Digital Video Broadcasting (DVB) standard, and
thus is able to receive digital broadcasts of that standard. For
its operation you need an antenna, which must be installed
appropriately.
NOTE
In general we equate a channel with a frequency. Unlike ana-
logue broadcasts, however, digital broadcasts are not all as-
signed to their own frequencies; instead, multiple television
broadcasts are transmitted through a single frequency. The fre-
quency in digital broadcasting is usually called transponder. To
reduce confusion in this manual, the word
service
is preferably
used than
channel
as a term to indicate one television or radio
broadcast.
1.1 Features
The TF 7010 HT digital receiver has the following features:
• Can store up to 2000 television and radio services.
2 Introduction
• You can create favourite lists of your favourite services.
•
You can view information about the current television or
radio programme.
•
Has an electronic programme guide that provides an
overview of scheduled programmes.
•
You can update the firmware of the digital receiver to the
latest version which would be provided by the manufac-
turer.
1.2 Controlling the digital receiver
You can operate the digital receiver with the remote control
and the buttons on the front panel.
NOTE
When the digital receiver is off but plugged into a wall outlet,
we say that it is in standby mode; on the other hand, when it is
on, it is in operation mode. Even when you are not using the
digital receiver, you should keep it plugged into a wall outlet
to be in standby mode so that it can run timer events at any
time.
1.2 Controlling the digital receiver 3
1.2.1 The front panel
The front panel of the digital receiver has buttons to control the
digital receiver, and specific lamps and a display to indicate its
status. The following indicates what they mean.
Push the
a
mark on the centre of the front panel to open the
flap.
TV/STB lamp lights up while the digital receiver is on.
REMOTE
lamp lights up whenever you press a button on
the remote control.
STANDBY
lamp lights up while the digital receiver is in
standby mode.
Front display
displays the current time in standby mode,
and displays the current service in operation mode.
STANDBY
button switches the digital receiver between
standby mode and operation mode.
OK
button displays the services list. See
§
5.2.1 for more
details. It is also used to select a menu item.
MENU
button displays the main menu. It is also used to
return to the previous menu from a submenu.
CHANNEL
c
,
a
buttons switch to previous or next service.
They are also used to navigate in menus and interactive
screens.
VOLUME
c
,
a
buttons decrease or increase the volume.
They are also used to change values for menu options.
4 Introduction
1.2.2 The remote control
1
2
3
4
5
6
7
8
9
10
11
12
19
21
10
20
19
18
17
16
15
14
13
1
button switches the digital re-
ceiver between standby mode and
operation mode.
2
pauses live television.
3
V.Format
changes video resolution.
See § 3.2.2 for more details.
4
Numeric buttons are used to en-
ter a service number for service
change or to specify values for
menu options.
5
switches between the current
service and the previously viewed
one.
6
displays teletext.
7
is used to select an audio track
and a sound mode, or a video
track of multifeed programme.
8
MENU
displays the main menu. It
is also used to return to the previ-
ous menu from a submenu.
9
OK
displays the services list. See
§
5.2.1 for more details. It is also
used to select a menu item.
10
V−
,
V+
buttons decrease or in-
crease the volume. They are also
used to change values for menu
options.
11
EXIT is used to exit the current screen.
Tabla de contenidos
Otros manuales de Receptor de Topfield
Topfield
Topfield TF 6700 IRc Manual de usuario
Topfield
Topfield FREE TO AIR TF3100FEi Manual de usuario
Topfield
Topfield TF 5100 PVRt HDMI Manual de usuario
Topfield
Topfield TF 4410 PVRt Manual de usuario
Topfield
Topfield TF 6000 CR Manual de usuario
Topfield
Topfield TF 5000 CI Manual de usuario
Topfield
Topfield TRF-2200 Manual de servicio
Topfield
Topfield TF 5050 CI Manual de usuario
Topfield
Topfield TF 7720 HSIR Manual de usuario
Topfield
Topfield TF 5000 Fe Manual de usuario
Topfield
Topfield TF6000T Manual de usuario
Topfield
Topfield TF 5510 PVR Manual de usuario
Topfield
Topfield TF 500 PVRc Manual de usuario
Topfield
Topfield CRC-2400 Manual de usuario
Topfield
Topfield TRF-5300 Manual de servicio
Topfield
Topfield TRF-2400 Manual de servicio
Topfield
Topfield TF 6000PVR Manual de usuario
Topfield
Topfield TF 5100 PVR Manual de usuario
Topfield
Topfield SBP-2070 Manual de usuario
Topfield
Topfield CBI-2070 Manual de usuario
