Topfield TF 5000 CI Manual de usuario
TOPFIELD
TF 5000 CI
TF 5100 CI
User Guide
Digital Satellite Receiver
Common Interface
iii
Contents
Contents iii
1 Introduction 1
1.1 Features ............................... 1
1.2 Controlling the digital receiver .................. 2
1.2.1 The front panel ....................... 2
1.2.2 The remote control ..................... 4
1.3 What is common interface? .................... 5
2 Setup 7
2.1 Unpacking .............................. 7
2.2 Safety precautions ......................... 7
2.3 Rear panel connections ....................... 9
2.4 Connecting up your digital receiver ............... 10
2.4.1 Connecting to the antenna ................ 10
2.4.2 Connecting to your television .............. 11
2.4.3 Connecting to your video cassette recorder ....... 13
2.4.4 Inserting batteries in the remote control ......... 13
3 Preference Settings 15
iv CONTENTS
3.1 Language settings .......................... 15
3.2 Video and audio settings ...................... 16
3.2.1 Television standard .................... 17
3.2.2 Color model ......................... 17
3.2.3 Video cassette recorder .................. 18
3.2.4 Television aspect ratio ................... 18
3.2.5 Sound mode ........................ 19
3.2.6 Radio frequency output .................. 19
3.3 Local time setting .......................... 20
3.4 Parental control ........................... 22
3.5 Adjusting the on-screen display .................. 23
4 Service Search 25
4.1 Searching broadcasting services .................. 25
4.1.1 Configuring LNB settings ................. 25
4.1.2 Configuring DiSEqC 1.2 settings ............. 28
4.1.3 Configuring USALS settings ............... 29
4.1.4 Searching services ..................... 30
4.2 Editing the transponder list .................... 33
4.3 Resetting to factory settings .................... 34
4.4 Resetting to installer settings ................... 34
5 Daily Usage 36
5.1 Volume control ........................... 36
5.2 Watching television ......................... 36
5.2.1 Watching favorite services ................ 38
5.2.2 Viewing program information .............. 38
5.2.3 Selecting audio tracks ................... 39
v
5.2.4 Selecting subtitle tracks .................. 40
5.2.5 Viewing teletext ...................... 40
5.3 Viewing electronic program guide ................ 40
5.4 Watching multifeed program ................... 42
5.5 Making timer events ........................ 42
6 Listing Services 45
6.1 Editing the service list ....................... 45
6.2 Editing the favorite list ....................... 47
6.3 Transferring receiver data ..................... 48
7 Firmware Update 50
7.1 Over the air ............................. 51
7.2 From your computer via RS-232 port ............... 51
7.3 From another digital receiver via RS-232 port .......... 52
Index 54
1
Chapter 1
Introduction
The TF 5000CI / TF 5100 CI digital receiver is fully compliant
with the international Digital Video Broadcasting (DVB) stan-
dard, and can receive digital broadcasts. For its operation, you
need an antenna, which must be installed appropriately.
NOTE
In general we equate a channel with a frequency. However,
unlike analog broadcasts, digital broadcasts are not all as-
signed to their own frequencies; instead, multiple television
and radio broadcasts are transmitted through a single fre-
quency. The frequency in digital broadcasting is usually called
transponder. To reduce confusion, the word service is prefer-
ably used than channel as service indicates one television or
radio broadcast in this manual.
1.1 Features
The TF 5000CI / TF 5100 CI digital receiver has the following
features:
• Supports DiSEqC 1.0, DiSEqC 1.1, DiSEqC 1.2 and US-
2 Introduction
ALS.
• Can store up to 5000 television and radio services.
• Has an electronic program guide that provides an overview
of program schedules for next few hours.
• You can edit the service list.
• You can make a favorite list with your favorite channels.
• You can view the information of the current television or
radio program.
• You can update the firmware of the digital receiver to
the latest version, which will be provided by the manu-
facturer.
1.2 Controlling the digital receiver
The digital receiver can be operated with the remote control
and the buttons on the front panel.
NOTE
When the digital receiver is off but plugged to a wall outlet,
we say that it is in standby mode; on the other hand, when
it is on, it is in operation mode. You should keep the digital
receiver plugged to a wall outlet on standby mode so as it can
run timer events at any time.
1.2.1 The front panel
The front panel of the digital receiver has buttons to operate
the digital receiver, and specific lamps and a display to indi-
cate its status. Their usage is as follows:
1.2 Controlling the digital receiver 3
STANDBY
CHANNEL
VOLUME
TV/STB
REMOTE
STANDBY
STANDBY button switches the digital receiver between standby
mode and operation mode. (On/Off
CHANNEL
a
,
c
buttons move to the next or previous ser-
vice. They are also used to navigate in the menus and
interactive screens.
VOLUME
b
,
d
buttons increase and decrease the volume.
They are also used to change options for a menu item.
TV/STB lamp lights up while your video recorder operates
instead of the digital receiver. See § 3.2.3 for more de-
scription.
REMOTE lamp lights up whenever you press a button of
the remote control.
STANDBY lamp lights up while the digital receiver is in standby
mode.
Front display displays the current time in standby mode,
and displays the current service and status of the dig-
ital receiver in operation mode.
4 Introduction
1.2.2 The remote control
SAT N/P
1
2
3
4
5
6
77
8
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
button switches the digital receiver
between standby mode and operation
mode. (On/Off
2
button switches the output of the
TV SCART socket between the digital
receiver and the device connected to
the VCR SCART socket. See § 3.2.3 for
more description.
3
Numeric buttons are used to enter ser-
vice numbers and menu options.
4
button switches between the cur-
rent service and the previously viewed
one.
5
MENU button displays the main menu.
It is also used to return to the previous
menu from a submenu.
6
OK button displays the service list. It
is also used to select menu items.
7
V+,
V−buttons increase and de-
crease the volume. They are also used
to change options for a menu item.
8
P+,
P−buttons move to the next or previous service.
They are also used to navigate in the menus and interac-
tive screens.
9
EXIT button is used to leave the current screen.
10
button is used to select an audio track and sound
mode, or a video track of multifeed program.
Otros manuales para TF 5000 CI
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Receptor de Topfield
Topfield
Topfield TF 7700 HTCO Manual de usuario
Topfield
Topfield TF 7000 HT Manual de usuario
Topfield
Topfield TF 4400 PVRt Manual de usuario
Topfield
Topfield CBC-5150 Manual de usuario
Topfield
Topfield TRF-2400 Manual de servicio
Topfield
Topfield TF 5510 PVR Manual de usuario
Topfield
Topfield CBC-5200 Manual de usuario
Topfield
Topfield TF6000T Manual de usuario
Topfield
Topfield TF 6100 VI Manual de usuario
Topfield
Topfield TBF-100HD Manual de usuario
Topfield
Topfield TF-S3000CHD Manual de usuario
Topfield
Topfield SBP-2000 Manual de usuario
Topfield
Topfield TF 600 PVRc Manual de usuario
Topfield
Topfield SRP-2401CIplus Manual de servicio
Topfield
Topfield TF 6000PVR Manual de usuario
Topfield
Topfield TF 5000 CIP Manual de usuario
Topfield
Topfield TF6500F Manual de usuario
Topfield
Topfield TF MMDS100 Manual de usuario
Topfield
Topfield TF 7710 HTCI Manual de usuario
Topfield
Topfield TF 5000 PVRt Masterpiece Manual de usuario
