Topcon RL-SV2S Manual de usuario
INSTRUCTION MANUAL
ROTATING LASER
RL-SV2S
31365 90030
i
FOREWORD
Thank you for selecting the TOPCON instrument.
• Please read this instruction manual carefully before using this instrument.
• Verify that all equipment is included.
C“ STANDARD SYSTEM COMPONENTS” (p. iii)
• The specifications and general appearance of the instrument are subject to change without
prior notice and without obligation by Topcon Corporation and may differ from those appearing
in this manual.
• Some of the diagrams shown in this manual may be simplified for easier understanding.
ii
HOW TO READ THIS MANUAL
XSymbols
The following conventions are used in this manual.
G:Indicates precautions and important items which should be read before
operations.
C:Indicates the chapter title to refer to for additional information.
$:Indicates supplementary explanation.
iii
STANDARD SYSTEM COMPONENTS
• Please make sure that all of above items are in the box when you unpack.
*1),*2),*3) Batteries included in the package are to confirm the initial operation. Please replace
the batteries provided with new batteries (alkaline) as soon as possible.
Rechargeable battery type Dry battery type
1) RL-SV2S Instrument .......................................1pc.
2) Remote controller RC-60
(with AA Manganese battery x 2pcs.) .............1pc.
3) Level Sensor LS-80L.......................................1pc.
4) Model-6 Level Sensor Holder .........................1pc.
5) Battery holder DB-74C ....................................1pc.
6) Ni-MH battery pack BT-74Q ............................1set
7) AC/DC converter AD-15 ..................................1pc.
8) AA-size dry cell batteries*1) ............................4pcs.
9) Carrying case ..................................................1pc.
10) Instruction manual ...........................................1vol.
1) RL-SV2S Instrument....................................... 1pc.
2) Remote controller RC-60
(with AA Manganese battery x 2pcs.) ............ 1pc.
3) Level Sensor LS-80L ...................................... 1pc.
4) Model-6 Level Sensor Holder ........................ 1pc.
5) Battery holder DB-74 ...................................... 1pc.
6) D-size dry cell batteries*2).............................. 4pcs.
7) AA-size dry cell batteries*3)............................ 4pcs.
8) Carrying case ................................................. 1pc.
9) Instruction manual .......................................... 1vol.
iv
CONTENTS
FOREWORD ................................................................................................................................. I
HOW TO READ THIS MANUAL................................................................................................... II
STANDARD SYSTEM COMPONENTS ...................................................................................... III
CONTENTS .................................................................................................................................IV
1. PRECAUTIONS FOR SAFE OPERATION ............................................................................ 1
2. PRECAUTIONS ..................................................................................................................... 6
3. LASER SAFETY INFORMATION .......................................................................................... 8
Laser Safety................................................................................................................ 8
4. NOMENCLATURE ............................................................................................................... 11
4.1 RL-SV2S....................................................................................................................... 11
RL-SV2S Nomenclature............................................................................................ 11
RL-SV2S Display ...................................................................................................... 13
4.2 Remote controller RC-60 .............................................................................................. 14
RC-60 Nomenclature ................................................................................................ 14
RC-60 Display........................................................................................................... 14
4.3 Level Sensor LS-80L .................................................................................................... 15
LS-80L Nomenclature ............................................................................................... 15
LS-80L Display.......................................................................................................... 16
LS-80L Detective Range........................................................................................... 17
5. PREPARATION AND FUNCTIONS ..................................................................................... 18
5.1 Power Source ............................................................................................................... 18
RL-SV2S (Dry battery type) ...................................................................................... 18
CONTENTS
v
RL-SV2S (Rechargeable battery type)...................................................................... 20
RC-60........................................................................................................................ 23
LS-80L....................................................................................................................... 23
5.2 How to set remote controller communication channel .................................................. 24
RL-SV2S ................................................................................................................... 24
RC-60........................................................................................................................ 24
6. BASIC OPERATION............................................................................................................. 25
6.1 Setting Up Instrument ................................................................................................... 25
Horizontal Rotation.................................................................................................... 25
Example Operational................................................................................................. 27
Vertical Rotation........................................................................................................ 27
6.2 Height Alert Function .................................................................................................... 28
How to reset .............................................................................................................. 28
7. APPLIED OPERATION AND SETTING OF VARIOUS FUNCTIONS.................................. 29
7.1 Setting Grades.............................................................................................................. 29
How to enter grade values ........................................................................................ 29
How to set grades ..................................................................................................... 31
Example of how to set up.......................................................................................... 33
Matching Mode (Manual Slope) ................................................................................ 35
7.2 Line Control (manual vertical beam alignment) ............................................................ 37
7.3 Setting of Various Functions ......................................................................................... 40
Selecting MENU........................................................................................................ 40
Masking (Laser beam shutter) setting....................................................................... 41
CONTENTS
vi
How to change the rotary head speed ...................................................................... 42
Switching Auto leveling / Manual Mode .................................................................... 43
Setting channel ......................................................................................................... 44
Sleep mode ON/OFF ................................................................................................ 44
Height Alert ON/OFF................................................................................................. 46
8. CHECK AND ADJUSTING................................................................................................... 47
8.1 Check and Adjust Horizontal Rotation .......................................................................... 47
Horizontal rotation grade error .................................................................................. 47
Horizontal Rotation Cone Error................................................................................. 51
Grade Setting Error................................................................................................... 52
8.2 Vertical Calibration........................................................................................................ 54
Checking Calibration................................................................................................. 54
Horizontal calibration and adjustment....................................................................... 55
9. STORAGE PRECAUTIONS................................................................................................. 57
10. HOW TO STORE .................................................................................................................58
11. SPECIFICATIONS ...............................................................................................................59
12. ERROR DISPLAY ................................................................................................................62
13. REGULATIONS.................................................................................................................... 65
1
1. PRECAUTIONS FOR SAFE OPERATION
For the safe use of the product and prevention of injury to operators and other persons as well
as prevention of property damage, items which should be observed are indicated by an
exclamation point within a triangle used with WARNING and CAUTION statements in this
instruction manual.
The definitions of the indications are listed below. Be sure you understand them before reading
the manual’s main text.
Definition of Indication
WARNING Ignoring this indication and making an operation error could possibly
result in death or serious injury to the operator.
CAUTION Ignoring this indication and making an operation error could possibly
result in personal injury or property damage.
This symbol indicates items for which caution (hazard warnings inclusive) is urged.
Specific details are printed in or near the symbol.
This symbol indicates items which are prohibited. Specific details are printed in or
near the symbol.
This symbol indicates items which must always be performed. Specific details are
printed in or near the symbol.
1. PRECAUTIONS FOR SAFE OPERATION
2
General
Warning
Do not perform disassembly or rebuilding. Fire, electric shock or burns could result.
Do not use the unit in areas exposed to high amounts of dust or ash, in areas where
there is inadequate ventilation, or near combustible materials. An explosion could
occur.
When securing the instrument in the carrying case make sure that all catches,
including the side catches, are closed. Failure to do so could result in the
instrument falling out while being carried, causing injury.
Caution
Do not use the carrying case as a footstool. The case is slippery and unstable so a
person could slip and fall off it.
Do not place the instrument in a case with a damaged case or belt. The case or
instrument could be dropped and cause injury.
Otros manuales para RL-SV2S
1
Tabla de contenidos
Otros manuales de Instrumento de medición de Topcon
Topcon
Topcon GPT-7000i Series Manual de usuario
Topcon
Topcon IS Series Manual de usuario
Topcon
Topcon ES series Guía de instalación
Topcon
Topcon GTS-821A, GTS-822A, GTS-823A, GTS-825A Manual de usuario
Topcon
Topcon FC-2600 Manual de usuario
Topcon
Topcon ES-52 Manual de usuario
Topcon
Topcon KR-1W Manual de usuario
Topcon
Topcon TP-L6 Series Manual de usuario
Topcon
Topcon Sokkia FX Series Manual de usuario
Topcon
Topcon RM-8800 Manual de usuario
Topcon
Topcon i-33 Manual de usuario
Topcon
Topcon GTS-230N Manual de usuario
Topcon
Topcon GTS-230 Series Manual de usuario
Topcon
Topcon RC-5A Manual de referencia
Topcon
Topcon CL-200 Manual de usuario
Topcon
Topcon GTS-750 Series Manual de usuario
Topcon
Topcon GTS-230W Series Manual de usuario
Topcon
Topcon RL-H3C Manual de usuario
Topcon
Topcon OS Series Manual de usuario
Topcon
Topcon DS Series Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario