4
1. Connect the device to PC using
USB cable and charge the battery
Connect device to PC using MiniUSB cable. Device
will automatically start charging the battery and
will notify the user about that with a short beep.
When battery will be fully charged you will hear a
beep again. Using the device for the rst time it is
recommended to charge the battery for 12 hours.
2. Place the device in an open area
TOBE GPS is using the latest GPS technologies and
the device establishes its location using a direct
satellite connection. After you turned your device
on it doesn’t know where it is so make sure that you
will put the device in such place that there would be
as much of a clear sky as it’s possible – outdoors,
in the room near the window, in other places not
covered with a steel or a concrete.
3. Login at www.tobegps.com
Enter www.tobegps.com in the search eld in your
web browser. Log in to the system using provided
username and password that are on a card which
comes together with the item. If you can’t login
make sure you enter your username and password
correctly (these are case sensitive). If you are sure
that you have entered your details correctly but still
cannot login, please contact TOBE GPS staff at
www.tobegps.com/support.
