Toa 9000M2 Series Manual de usuario
9000M2 Series
Quick Start Guide
- Audio Distribution-
House of Worship
1/37
System Overview
9000M2 Series Mixer Amplifier and audio devices are installed in a rack room. When an event is
held in the Fellowship Hall, Mixer and Wireless tuners are installed temporary.
If there are too many people and more people cannot enter in the Fellowship Hall, the Hall
sound can be also listened to in Classroom1, 2. The sound of Classroom1 is broadcast in
Classroom2 and the sound of Classroom2 is broadcast in Classroom1. In each area, output
volume is adjustable by remote controllers on the wall.
System Components
1．A-9060DHM2 x 1
2．ZM-9012 x 3
3．ZM-9014 x 3
4．D-001T x 3
5．T-001T x 2
6．RC-001T x 1（with AD-246）
7．WT-5800 x 5
8．WM-5220 x 4
9．WM-5320H x 1
10．DVD x 2
11．MIXER x 1
12．P-9060DH x 1
13．DA-500F-HL x 1
14．BS-678
15．H-1
16．HX-5B
17．F-1300BT
Setting
Input 1 (D-001T): MIXER Out
Input 2 (D-001T): Blank
Input 3 (D-001T): WT-5800 for Room 2
Input 4 (D-001T): DVD for Room 2
2/37
Input 5 (D-001T): WT-5800 for Room 1
Input 6 (D-001T): DVD for Room 1
Output 1 (A-9060DHM2): Rectory
Output 2 (A-9060DHM2): Outside Entrance
Output 3 (P-9060DH): Classroom 1
Output 4 (P-9060DH): Classroom 2
Output 5 (DA-500F-HL): Fellowship Hall
Output 6 (A-9060DHM2): Webcast / Recording / Broadcast
Remote out (RC-001T): ZM-9012[0] >> ZM-9012[1] >> ZM-9014[2] >>
ZM-9014[3] >> ZM-9014[4] >> ZM-9012[5]
Button Configuration
ZM-9012[0] : Rectory
Changing the output volume.
ZM-9012[1]: Outside Entrance
Changing the output volume.
ZM-9014[2]: Classroom 1
Button 1: Input 5 – Output 3
Button 2: Input 6 – Output 3
Button 3: Input 3, 4 – Output 3
Button 4: Input 1 －Output 3
Volume: Output 3
ZM-9014[3]: Classroom 2
Button 1: Input 3 – Output 4
Button 2: Input 4 – Output 4
Button 3: Input 5, 6 – Output 4
Button 4: Input 1 －Output 4
Volume: Output 4
3/37
ZM-9014[4]: Fellowship Hall
Button 1: Input1 – Output .5, 6.
Button 2: Input1 – Output 1,5,6.
Button 3: Input1 – Output 5.
Volume: Output 5.
ZM-9012[5]:
Changing the input volume.
4/37
Configuration
5/37
Configuration
5/37
1. The following is the initial setting wizard screen.
2. Click “ New File” on the Start Menu window.
6/37
3. Set module configurations.
4. Select the modules to be inserted into the amplifier’s slots from the pull-down menu in the
Module field.
7/37
5. Select a module for each Slot. At the same time, please name each channel (ex. “MIC1”).
Main Frame Name 1 >> “RECTORY” Name 2>> “OUTSIDE”
Slot #1 >> D-001 Name 1 >> ”MIXER” Name 2 >> ”-”
Slot #2 >> D-001 Name 1 >> ”MIC2” Name 2 >> ”DVD2”
Slot #3 >> D-001 Name 1 >> ”MIC1” Name 2 >> ”DVD1”
Slot #4 >> None
Slot #5 >> T-001 Name 1 >> ”CLASS1” Name 2 >> ”CLASS2”
Slot #6 >> T-001 Name 1 >> ”HALL” Name 2 >> ”OPTION”
Slot #7 >> None
Slot#8>>RC-001
6. Click the “NEXT” button when finished.
8/37
7. The following window is for setting devices connected to REMOTE VOLUME terminal on
9000M2 rear panel. If you do not use ZM-9001, ZM-9002 or ZM-9003, select “NONE” from the
combo box “TYPE”.
8. In this “Audio Distribution “application, select NONE both REMOTE VOL1 and REMOTE VOL
2.
9/37
9. Click “FINISH” button.
10. Setting for Remote Controller: ZM-9011/9012/9013/9014.
10/37
Otros manuales para 9000M2 Series
5
Otros manuales de Amplificador de Toa
Toa
Toa A-9060DH Manual de usuario
Toa
Toa A-903A Manual de instrucciones
Toa
Toa KD-1 Manual de instrucciones
Toa
Toa AV-60S-AM Manual de usuario
Toa
Toa AV-20D Manual de usuario
Toa
Toa DA-250F Manual de usuario
Toa
Toa P-75D Guía del usuario
Toa
Toa P-924A Manual de instrucciones
Toa
Toa A-2030 CE Manual de usuario
Toa
Toa A-1503 Manual de usuario
Toa
Toa DA-1000F Manual de usuario
Toa
Toa A-2030D-AS Manual de usuario
Toa
Toa DA-500FH CE Manual de usuario
Toa
Toa A-901A Manual
Toa
Toa A-9060DH Guía del usuario
Toa
Toa A-9060DH Manual de usuario
Toa
Toa A-1706 Manual de usuario
Toa
Toa IP-A1PA12 Manual de usuario
Toa
Toa BG-115 Manual de usuario
Toa
Toa DA-250F CE Manual de usuario
