TMI Products CAL. YM92 Manual de usuario
CAL. YM92
1/20 SECOND CHRONOGRAPH
Instructions
1/4
◆Hour, Minute and Small second hands
◆Date
◆Stopwatch
• 4 Stopwatch hands: 1/20-second, Second, Minute and Hour hand.
• The stopwatch can measure up to 11:59' 59" 95.
• Sprit time measurement.
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
60
1/20
Sec.
CHRONO
30 12
6
9 3
31
YM92
S.EPSON
Features
STOPWATCH
1/20-second hand
N 1 2
B
A
N
：Normal position
1 ：First click position
2 ：Second click position
STOPWATCH
Second hand
Crown
Hour hand
Small second hand
STOPWATCH
Hour hand
Minute hand
Date
Movement Size 12'''
Outside Diameter 27.60 mm (12H-6H) x 24.00 mm (3H-9H)
Casing Diameter 27.00 mm (12H-6H)
Height 3.70 mm (Include battery)
Battery SR927SW
Battery Life Approx. 3 years
STOPWATCH
Minute hand
◆Battery Life Indicator
When the battery nears its end, the small second hand moves at two-second intervals instead of normal
one-second intervals. In that case, have the battery replaced with a new one as soon as possible.
Note: The watch remains accurate while the small second hand is moving at two-second intervals.
CAL. YM92
1/20 SECOND CHRONOGRAPH
Instructions
2/4
60
1/20
Sec.
30 12
6
9 3
31
YM92
S.EPSON
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
CHRONO
How to Set Time and Date:
N 12
• Pull crown out to 1st. click position. • Turn the crown clockwise until the previous day’s date
appears.
Note: Do not set the date between 9:00 PM and 1:00 AM Otherwise, the date
may not change properly.
• Pull crown out to the 2nd click position when
the second hand is at the 12 o'clock position.
Note: When the stopwatch is or has been measuring or is stopped, if the
crown is pulled out to the 2nd. click position, it will automatically
reset the Stopwatch hands to "0".
60
1/20
Sec.
30 12
6
9 3
YM92
S.EPSON
1
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
CHRONO
• Push crown back to normal position.
1 2
3 4
5
1
60
1/20
Sec.
30 12
6
9 3
YM92
S.EPSON
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
CHRONO
1
60
1/20
Sec.
30 12
6
9 3
YM92
S.EPSON
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
CHRONO
60
1/20
Sec.
30 12
6
9 3
YM92
S.EPSON
1
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
CHRONO
N 1 2
N1 2
Pull out
1st. position
Pull out
2nd. position
Push back
Normal position
• Turn to set the Hour and Minute hands.
• Turn clockwise to advance the Hour and
Minute hands past 12:00 AM.
Doing so will advance the date to the current date.
• Set the Hour and Minute hands to the desired time
taking AM or PM into consideration.
Recommend:
•WhensettingtheMinutehand,rstadvanceit4to5
minutes ahead of the desired time and then turn it back to the
exact minute.
CAL. YM92
1/20 SECOND CHRONOGRAPH
Instructions
3/4
Standard Measurement
BA A
Start Stop Reset
Accumulated Elapsed Time Measurement
A A A BA
Start Stop Restart Stop Reset
Sprit Time Measurement
AB
AB B
Sprit Sprit
Release
Stop Reset
Start
Note: Measurement and release of sprit time can be repeated by pressing button B.
• 1/20-second hand is capable of timing 12 minutes. (1 second x 43,200 times)
• Second hand is capable of timing 12 hours. (60 seconds x 720 times)
How to Use Stopwatch Functions:
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
60
1/20
Sec.
CHRONO
30 12
6
9 3
31
YM92
S.EPSON
STOPWATCH
1/20-second hand
B
A
STOPWATCH
Second hand
START
STOP
RESTART
SPRIT
SPRIT RESET
RESET
The stopwatch can measure up to 11:59' 59" 95 in 1/20 second increments.
When the measurement reaches 12 hours, the stopwatch automatically stops counting.
STOPWATCH
1/20-second dial
Measurement of Two Competitors
A B A B B
Start ResetFinish Time
of 1st
Competitor
2nd
Competitor
Finishes
Finish Time
of 2nd
Competitor
STOPWATCH
Hour dial
STOPWATCH
Hour hand
STOPWATCH
Minute hand
* Before using the stopwatch, be sure to check that the crown is set at the normal position
and that the Stopwatch hands are reset to the "0" position.
Note: If the Stopwatch hands do not return to the "0" position when the stopwatch is reset to "0",
follow the procedure in "Stopwatch Hand Position Adjustment".
Note: Restart and stop of the stopwatch can be repeated by pressing button A.
◆Movement of Stopwatch 1/20-second hand
• After the stopwatch is started, Stopwatch 1/20-second hand moves for about 10 minutes and automatically
stops at the "0" position.
• When the measurement is stopped or split time is measured, it moves to indicate the elapsed 1/20 seconds.
• After the stopwatch is restarted or split time is released, Stopwatch 1/20-second hand moves for about 10
minutes and stops automatically.
• In the same manner, if the stopwatch is stopped and restarted repeatedly or split time is measured and released
repeatedly, Stopwatch 1/20-second hand moves for about 10 minutes and stops automatically.
CAL. YM92
1/20 SECOND CHRONOGRAPH
Instructions
4/4
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
60
30
12
6
9 3
31
YM92
S.EPSON
1/20
Sec.
CHRONO
1/20
Sec.
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
60
30
12
6
9 3
31
YM92
S.EPSON
CHRONO
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
60
30
12
6
9 3
31
YM92
S.EPSON
1/20
Sec.
CHRONO
If the Stopwatch hands are not in “0” position, follow the procedures below to set them.
Stopwatch Hand Position Adjustment:
• Press button “A” for 2 seconds.
- Stopwatch 1/20-second hand turns a full round and
can now be set to correct position.
• Press button “B” repeatedly to set it to “0” position.
Note: Stopwatch 1/20-second hand moves quickly if button "B" is kept pressed.
B
A
Press A
2 sec.
• Press button “A” for 2 seconds.
- Stopwatch Second hand turns a full round
and can now be set to correct position.
• Press button “B” repeatedly to set it to “0” position.
Note: Stopwatch Second hand moves quickly if button "B" is kept
pressed.
12
3
5
Press A
2 sec.
B
A
N 1 2
Pull out
2nd. position
• Press button “A” for 2 seconds.
- Stopwatch Hour and Minute hands turn and can now
be set to correct position.
• Press button “B” repeatedly to set it to “0” position.
Note: Stopwatch Hour and Minute hands move quickly if button "B" is kept
pressed.
4
Press A
2 sec.
B
A
Stopwatch
1/20-second hand
Stopwatch
second hand
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
60
30
12
6
9 3
31
YM92
S.EPSON
1/20
Sec.
4
5
5
0
5
5
6
0
1
0
1
5
5
4
0
3
5
3
0
2
5
2
0
60
30
12
6
9 3
31
YM92
S.EPSON
1/20
Sec.
• Push crown back to normal position.
Push back
Normal position
N1 2
Stopwatch
hour and minute hands
• Pull the crown out to 2nd. click position.
Note: When the stopwatch is or has been measuring or is stopped,
if the crown is pulled out to the 2nd. click position, it will
automatically reset.
The hands can be readjusted in the
following order by pressing button "A"
for 2 seconds.
2
43
Otros manuales de Mirar de TMI Products
TMI Products
TMI Products VD72 Manual del instalador
TMI Products
TMI Products VD74 Manual de usuario
TMI Products
TMI Products VJ5 Series Guía de inicio rápido
TMI Products
TMI Products vd5 Manual de usuario
TMI Products
TMI Products VD86 Manual de usuario
TMI Products
TMI Products VD50C Manual de usuario
TMI Products
TMI Products VD35A Manual de usuario
TMI Products
TMI Products VD59C Manual del instalador
TMI Products
TMI Products CAL.YM26 Manual de usuario
TMI Products
TMI Products VK83A Manual del instalador
TMI Products
TMI Products vk61 Guía de inicio rápido
TMI Products
TMI Products VD37 Manual de usuario
TMI Products
TMI Products VD31 Manual de usuario
TMI Products
TMI Products VK68A Manual del instalador
TMI Products
TMI Products VD85 Manual de usuario
TMI Products
TMI Products VD35 Manual de usuario
TMI Products
TMI Products VD73 Manual de usuario
TMI Products
TMI Products S.Epson VX3S Manual de usuario
TMI Products
TMI Products VK63A Manual del instalador
TMI Products
TMI Products VD77 Manual de usuario
