TLS Electronics QuickControl XL Manual de usuario
TLS electronics GmbH
Tel.: +49 (0) 2103 50 06 - 0
Marie-Curie-Straße 20
Fax: +49 (0) 2103 50 06 - 90
D –40721 Hilden
e-mail: info@tls-electronics.de
QuickControl XL
Installation and user manual
Ident. Nr.: 8705663
Installation and user manual
2 Stand 09/17
Content
C 1 Allgemeine Informationen ............................................................3
C 2 Bestimmungsgemäße Verwendung und Einsatz.........................7
C 3 Geräteansicht/Gehäuse ...............................................................8
C 4 Montage/Verkabelung................................................................11
C 5 Inbetriebnahme ..........................................................................16
C 6 Bedienung..................................................................................50
C 10 Optionen...................................................................................51
C 11 Pflege, Wartung, Entsorgung, Support ....................................54
C 12 FAQ..........................................................................................55
C 13 Anschlussplan und Diagramme ...............................................57
E
G
B
Installation and user manual
Stand 09/17 3
C 1 General Information
C 1.1 Identification
Manufacturer: ..................................................... TLS electronics GmbH
Marie-Curie-Straße 20
D-40721 Hilden
Tel: +49 (0) 2103 5006 0
email: info@tls-electronics.de
Product:....................................................................... QuickControl XL
Version:.............................................................................................1.0
Installation and user manual:..............................................State 09/17
These operating instructions are a part of this product. They contain
important notes on handling the device. Please remember this also if
you pass on the device to third parties. Keep these operating
instructions for further reference.
Imprint
This operating instructions are published by TLS Communication
GmbH. All rights, including translation, reserved. Reproduction of any
kind, e.g. photocopies, microfilms or capturing through electronic data
processing equipment requires written approval by the publisher.
Reprint, also in part, is prohibited. These operating instructions reflect
the technical status at the time of going to press. Technological and
design changes are reserved.
Installation and user manual
4 Stand 09/17
C 1.2 Scope of delivery
QuickControl XL Ident. Nr.:
1x QuickControl XL..................................................................8640045
1x Infrared emitter single .......................................................8705445
1x Mains adaptor 5V/1000mA .................................................8706599
1x Screwdriver.........................................................................8705602
1x Cable USB 1m Am/BMini5m ..............................................8705594
Optional:
Adaptor (installation version) ..................................................8640024
C 1.3 Technical Data
External power supply: ................... 230 VAC, 50 Hz auf 7,0 VDC,
.................................................................................................0,5 A
Switching outputs max:................................................30V / 300mA
Connections:........................................2 x 9 pin Wago Klemmleiste
Inputs:.............................................................1 x Schlüsselschalter
........................................................................2 x externe Eingänge
Outputs ...................................................................................2 x IR
..............................................................................4 x Schaltkontakt
............................................................ 1 x Schaltkontakt GreenLine
.........................................................................................1 x RS232
Weight:.......................................................................................96 g
Dimensions (D/H/W):.............................................81 x 26 x 81 mm
C 1.3.1 PC System requirements
PC with INTEL® based or compatible Processor
256 MB RAM
50 MB available hard disc
Graphics card Minimum resolution 1024x768 Pixel
From Windows XP
Microsoft ® .NET Framework from Version 2.0
C 1.4 Environmental conditions
Operating temperature:............................................+5°C bis +40°C
Installation and user manual
Stand 09/17 5
Rel. humidity:....................................................................Max. 85%
Atmospheric pressure:.........................................600 bis 1000 hPA
C 1.5 In case of damage in transport
In case of transport damage, please observe the following:
Do not change the goods and the packaging in any way.
Let the deliverer sign for the damage.
Do not use the damaged device.
In case of delivery by a forwarding agent or parcel service,
please notify us of the damage telephonically or in writing
within 5 calender days.
Do not return the device without prior consultation!
Please note that we only accept returned goods if agreed to
accept the return in advance.
Non-compliance with these regulations invalidates any claim
for compensation!
The following regulations and safety notes regarding installation
and maintenance must be observed:
C 1.6 Standards and regulations
VDE 0100 Regulations for erection of power installations for rated
voltages below 1000V.
VDE 0105 Operating power installations, general stipulations.
EN 60335-1 Safety of household and similar electrical appliances.
C 1.7 General safety notes
Installation and user manual
6 Stand 09/17
This operating instructions contains basic notes to be observed when
operating TLS QuickControl XL. Follow the instructions closely to
avoid errors. It is therefore imperative to read these operating
instructions before working with TLS QuickControl XL.
The safety notes contained in these instructions that result in hazards
to persons unless observed, are indicated by the
Safety symbol in acc. With DIN 4844-W8 and the word “Danger”.
Work on electrical components or component groups may only be
performed by a qualified electrician in acc. with electrical regulations
(e.g. EN 60204, DIN VDE 0100/0113/0160).
Plug connections and cables may be destroyed. Connect plugs and
sockets without using force. Do not kink cables when laying; lay with
an adequate radius (R>5 x cable diameter).
Screws, bolts and threads may be damaged. Use suitable tools to
loosen screws and bolts.
Use device indoors only, i.e. not in open air. Never expose the device
to moisture!
C 1.8 Assembly notes
Installation and user manual
Stand 09/17 7
Danger
Before starting any work, unplug all devices / equipment / areas and
secure against accidental re-connection.
C 1.9 Warranty
TLS warranty for TLS QuickControl XL is 36 months. Damages
arising from improper operation or through use of force are not
covered by this warranty. The warranty is invalidated if unauthorised
persons open the device.
C 1.10 Safety
Danger
Voltage and current fluctuations when connecting the TLS
QuickControl XL may damage electronic components. Connect all
inputs and outputs before connecting the power supply.
Danger
Allow technical staff only to connect the device. (e.g. EN 60204, DIN
VDE 0100/0113/0160)
Danger
Electrical shocks from the power supply units may be fatal or lead to
grave injury to health. Never open the housing of the TLS
QuickControl XL.
C 2 Application area and intended use
Installation and user manual
8 Stand 09/17
TLS QuickControl XL is a multifunctional room control system for
small and mid-size conference rooms. QuickControl XL trasmits
control commands over long distances via IR commands and RS232
protocols to playback and display devices and controls via I/O
contacts connected screens, ceiling lifts and similar media techno-
logial devices.
QuickControl XL can be mounted space-saving in wall or integrated
in every table installation module. With each button at QuickControl
XL 8 functions can be executed simultaneously. With 8 internal and 2
optionally connectable external buttons a total of up to 80 functions
can be executed in that way.
The labelling of QuickControl XL can be done according to
individual needs.
QuickControl XL can be easily configurated via itsConfiguration
Tool,
The integrated GreenLine function of QuickControl XL diconnects
automatically all connected devices after the presentation from the
230 V~/110 V~ mains and puts all devices back into their initial state.
Thus this room control system helps to save energy costs and to
extend the devices’ life cycle.
C 3 View of device/Housing
Installation and user manual
Stand 09/17 9
C 3.1 Front view, operating mode
Sketch 1
C 3.2 Front view
Sketch 2
The transparent plastic cover for the inscription area is engaged at
the top and bottom. Using the miniature screwdriver, the cover
Mechanical
installation lock
PC output
Infrared receiver
Dip switch
Installation and user manual
10 Stand 09/17
can be loosened at the recess. The mechanical installation lock
and the PC connection, operating mode switch and infrared
learning eye can now be used.
C 3.3 Button numbering
Sketch 3
C 3.4 Rear view with cable terminal strips
Two 9-pole terminal strips X1 and X2 are located at the back of
QuickControl. The mains adaptor, 2 infrared emitters, 4 relays and
the mechanical installation lock can be connected to these terminal
strips (key switch to lock the keypad against unauthorised users).
Sketch 4
Tabla de contenidos
Otros manuales de Sistema de control de TLS Electronics
