6
1.5 Safety instructions
The tool is strictly approved only for the purposes
for which the manufacturer has designed it.
The tool must only be used for the activities described in this
owner's manual. Never use the tool for any purpose except that
for which it is designed. Safety is no longer guaranteed if the tool
is used incorrectly.
The tool may only be used to lift the Heat 220XLR and 220LR.
The stated nominal load of 150 kg must not be exceeded.
CAUTION
If used with the wrong accessories, this may cause
material damage and bodily injury.
Not using original tools and original accessories will result in a
high risk to safety.Only original accessories and accessories
which have been approved by BMW may be used (see BMW
workshop manual).
Only use the screws provided or screws of the same size and
quality class.
Alterations to the tool are not permitted. The manufacturer is not
liable for any alterations or modifications carried out on the tool
or for any resulting material or bodily injury.
CAUTION
Risk of material damage and bodily injury
You must read and understand the safety instructions before
carrying out the repair.
Not reading the instructions may result in serious bodily injury.
Wear safety shoes (according to ISO 20345, S2).
Wear protective gloves to prevent cut injuries.
Here, there is a risk of crushing and serious injury!
CAUTION
Risk of material damage and bodily injury
Untrained or uninstructed personnel are prohibited from
operating the tool.The tool must not be lent to untrained persons.
Ensure that the tool is only operated by trained personnel who
are instructed in its use.
Ensure that the owner's manual is made available
to the operating personnel.
Each operator must carefully read and understand this owner's
manual before starting for the first time.This manual must always
be available at the site where the product is used.
Follow the workshop manual from BMW AG.
Workshop manuals must be referred to without
reservation.
Follow the applicable national regulations for the
prevention of accidents.
In addition to the owner's manual and the binding provisions of
the accident prevention regulations which apply in the country
of use, you must also comply with the general, accepted rules for
safe and professional working.
Pay attention to the nameplate and the labelling
on the tool. The tool and the labels on it must be
inspected visually every time before use.
Never throw the tool or allow it to fall.
When lifting and lowering the load, avoid
bumping into obstacles.
Using the device to carry people or climbing on
the raised load is not permitted.
This tool must not be used if you see anything abnormal with it.
Please contact Service ( 4.2).
