3
TS400 Series
1 Introduction
1.1 General information for the user
This instruction includes installation, operation, maintenance, and parts information for TS400
series. Keep these instructions in a location which is easily accessible to every user and
make these instructions available to every new owner of the device.
Installation, commissioning and maintenance of the product can only be performed by
trained specialist personnel who have been authorized by the plant operator to do so.
To avoid possible injury to the personnel or damage to valve parts, WARNING,
CAUTION and NOTICE must be strictly followed.
Before installing or commissioning, be sure to read and thoroughly understand the
product manual and operate the product properly.
Operators must strictly observe the applicable national regulations with regards to
installation, function tests, repairs, and maintenance of electrical products.
For additional information or if specific problems occur that are not explained in these
instructions, contact the manufacturer.
1.2 Limited warranty and disclaimer
This product has been fully inspected and shipped through a thorough quality inspection
procedure. The manufacturer warranty period of the product is 18 months after the
product is shipped from Tissin in Korea.
For any failure or damage reported within the warranty period which is clearly our
responsibility, a replacement product or necessary parts will be provided. This limited
warranty applies only to our product independently, and not to any other damage
incurred due to the failure of the product.
Using the device in a manner that does not fall within the scope of its intended use,
disregarding this manual, using under unqualified personnel, or making unauthorized
alterations releases the manufacturer from liability for any resulting damage. This
renders the manufacturer's warranty null and void.
