8
Battery
Terminals operate using power supply from a standard power outlet. Inside the termi-
nal, there is an RTC battery for the running of the clock. Charge the terminal for at least
3 hours straight before you start using it. When there is a serious delay in time or the
clock keeps on restarting, the RTC needs to be replaced.
External power supply
Mini UPS (uninterrupted power supply) 5V and mini UPS 12V provide mobile power
supply to the terminals. Charge the mini UPS sufficiently for optimum performance.
Refer to http://accessory.fingertec.com for more information about accessories.
User Mgt
Enroll users/ manage user data.
User Role
Assign privilege to users for data secu-
rity.
COMM.
Setup FingerTec terminal communica-
tion with computer through LAN, RS232
and RS485. Set security password of the
device for a secure data transfer.
System
Congure the settings of the FingerTec
terminals from general to display set-
ting to ngerprint, and reset the termi-
nal to default settings.
Personalize
Adjust the date/time, Voice, bell sched-
ules settings of the terminal.
Data Mgt
To delete/backup or restore data.
Main Menu
Access Control
Congure door access settings in ter-
minal.
USB Manager
Upload and download data and infor-
mation to and from FingerTec terminal
using a USB ash disk.
Attendance Search
Check attendance and transaction logs
that are available in FingerTec termi-
nals and perform housekeeping in the
machine.
Short Message
Create & manage Short Message dis-
play.
Work Code
Create & manage workcode function-
ality.
Autotest
Tests that can be done on the FingerTec
terminal on various aspects.
Sys Info
Show basic information of the device,
capacity and rmware informatio
