Timber Tuff Tools TMW-57 Manual de usuario
Thank you very much for choosing a Timber Tuff product. For future reference, please complete the
owner’s record below:
Model: Purchase Date: _______________
Save the receipt, the warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This product is designed for certain applications only. The manufacturer and/or distributor cannot be
responsible for issues arising from modification. We strongly recommend that this product not be
modified and/or used for any application other than that for which it was designed. If you have any
questions relative to a particular application, DO NOT use the product until you have first contacted
the distributor to determine if it can, or should, be performed on the product.
For technical questions, please call 1-218-943-6290.
TECHNICAL SPECIFICATIONS
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions
listed below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this beam cutter until they
have read this manual and have developed a thorough understanding of how the
beam cutter works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors that cannot be built into this
product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep work area clean, free of clutter, and well-lit. Cluttered and dark work areas can cause accidents.
• Keep children and bystanders away while using the beam cutter. Distractions can cause you to lose
control, so visitors should remain at a safe distance from the work area.
• Be alert of your surroundings. Using the beam cutter in confined work areas may put you in a
dangerous situation.
PERSONAL SAFETY
• Stay alert, watch what you are doing, and use common sense when using the beam cutter. Do not use
the beam cutter while you are tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating the beam cutter may result in serious personal injury.
• Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing, and
gloves away from moving parts.
• Logging chaps should be used at all times while operating a chainsaw.
TIMBER BEAM CUTTER
OWNER’S MANUAL
TIMBER BEAM CUTTER OWNER’S MANUAL
MODEL# TMW-57
1 of 3
WARNING:
Carefully read and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and
other basic safety precautions may result in serious personal injury.
For Use With
Construction
Product Dimensions L x W x H
Any size chainsaw
Solid steel construction with a durable
powder-coat finish to resist corrosion
12’’x 7 1/2’’ x 2 1/4’’
08252016
TIMBER BEAM CUTTER OWNER’S MANUAL TIMBER BEAM CUTTER OWNER’S MANUAL
BEAM CUTTER USE AND CARE
• Do not modify the beam cutter in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment.
• Always check for damaged or worn out parts before using the beam cutter. Broken parts will
affect the beam cutter operation. Replace or repair damaged or worn parts immediately.
• The beam cutter is for OUTDOOR use ONLY.
CAUTION:
• When lifting logs, ALWAYS use CAUTION as logs can fall or drop. Heavy logs can cause injury
to feet, legs, and hands. ALWAYS wear protective clothing including steel toe boots, leather
gloves, and leg and arm protection. Logging chaps should be used at all times while operating
a chainsaw.
PARTS DIAGRAM:
PARTS LIST:
For replacement parts and technical questions, please call 1-218-943-6290.
MAINTENANCE
• Maintain your beam cutter. It is recommended that the general condition of the beam cutter be
examined before it is used. Keep the beam cutter in good repair by adopting a program of
conscientious repair and maintenance in accordance with the recommended procedures found in this
manual.
• Be sure to tighten all nuts and bolts before use.
• Keep the beam cutter clean. A properly maintained beam cutter will work more effectively. Keep all
parts dry, clean, and free from oil and grease.
• Cleaning. Use only soap and a damp cloth to clean your beam cutter.
WARRANTY
One-year limited parts warranty
BAC Industries
PO BOX 155
Miltona, MN 56354
Made in CHINA
2 of 3 3 of 3
Part#
1
2
Description
Bolt M10×40
U clamp
Qty.
2
1
Part#
3
4
Description
Frame
Leveling Bubble
Qty.
1
1
Size:145x210mm 157G铜版纸 REV 08/29/16
Otros manuales de Cortador de Timber Tuff Tools
Manuales populares de Cortador de otras marcas
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Manual de usuario
Makita
Makita DCS552 Manual de usuario
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 Manual de usuario
Makita
Makita 4112HS Manual de usuario
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S Manual de usuario
Hitachi
Hitachi CM 4SB2 Guía de solución de problemas
