TIL AMS-6000 Manual de usuario

AMS-6000

AUDIO MODE SELECTOR

Installation and

Operating Instructions

TiL Document No. 03RE325

Revision n/c Issue 5

AUGUST 2005

Technisonic Industries Limited

240 Traders Boulevard, Mississauga, Ontario L4Z 1W7

Tel: (905) 890-2113 Fax: (905) 890-5338

www.til.ca

REVISION HISTORY

[ 03RE325 ]

REV SECTION

- PAGE - DESCRIPTION DATE Edited by

Issue 4 Document Revise & Update Sections 2 and 3. 30/08/2007 FM

03RE325 Revision added regarding the 28Vdc.

Separated wiring diagram into combined &

separate mode drawings for simplicity.

Corrected pinouts on drawings and tables.

Reference CR #07069

Issue 5 CR#10073

Global

Incorporate New Document Template affecting

Title Page, Revision History, headers and

Footers, adds Warranty page. Corrected typo in

Revision History page.

Figures 3.3 and 3.4 wiring diagram changes 5A

fuse to 7.5A.

29/07/2010 FM

NOTE: Editing may have caused pages to be added or re-

sequenced as a result

This page left intentionally blank.

ESD CAUTION

This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive

gloves when handling printed circuit boards.

WARNING AND DISCLAIMER

Changes or modifications not expressly approved by Technisonic Industries could void the user’s

authority to operate the equipment.

This manual is designed to provide information about the A790. Every effort has been made to

make this manual as complete and accurate as possible.

WARRANTY INFORMATION

The Model AMS-6000 is under warranty for one year from date of purchase. Failed units caused by

defective parts, or workmanship should be returned to:

Technisonic Industries Limited

240 Traders Boulevard

Mississauga, Ontario L4Z 1W7

Tel: (905) 890-2113

Fax: (905) 890-5338

Summary of DO-160C Environmental Testing for Technisonic Model AMS-6000, Audi0 Mode

Selector:

Conditions Section Description of Conducted Tests

Temperature and Altitude 4.0 Equipment tested to categories C4 and D1.

Vibration 8.0 Equipment is tested without shock mounts to

categories B, M and N.

Magnetic Effect 15.0 Equipment is class Z.

Power Input 16.0 Equipment tested to category B.

Voltage Spike 17.0 Equipment tested to category B.

RF Emission 21.0 Equipment tested to category Z.

INSTALLATION APPROVAL NOTE

Presently no TSO standard exists for airborne FM transceivers. To make it easier for installation

agencies to provide their customers with an approved installation supported by an effective

Airworthiness Approval, Technisonic has secured Supplemental Type Certificate (STC) Approvals

(both US and Canadian) on its Airborne FM products for many helicopters currently being delivered

in the US and Canada as well as a number of single engine fixed wing aircraft. The above

referenced DO-160C test data is also on file and available from Technisonic to support approval

requirements in airframes for which Technisonic does not possess an STC.

Approved aircraft types are listed in the attachments to the formal STC documents. These STCs are

the exclusive property of Technisonic and require the written authority of Technisonic for their use.

To assist Factory Authorized Technisonic Dealers in the certification process, we have placed

copies of our Canadian and US STCs on our web site along with a letter of authorization for their

use. These documents may be downloaded and used as support for the technical submission to

FAA or Transport Canada. Only factory authorized dealers/installers are permitted to download and

make use of these documents on behalf of their customers (end users) in support of regulatory

agency approval. Please refer to the Technisonic web site www.til.ca for the latest issue of

available STCs and letter of authorization for use.

TECHNISONIC INDUSTRIES LIMITED

www.til.ca

AMS-6000 Installation and Operating Instructions TiL 03RE325 Rev n/c Issue 5

TABLE OF CONTENTS

SECTION TITLE PAGE

SECTION 1 GENERAL DESCRIPTION

1.1 Introduction ...................................................................................................... 1-1

1.2 Description ....................................................................................................... 1-1

1.3 Purpose of Equipment ........................................................................................ 1-1

1.4 Model Variation ................................................................................................. 1-1

1.5 Technical Characteristics .................................................................................... 1-2

SECTION 2 OPERATING INSTRUCTIONS

2.1 Features ........................................................................................................... 2-1

2.2 Operating Instructions ........................................................................................ 2-2

2.3 Combined Mode ................................................................................................ 2-2

2.4 Separate Mode ................................................................................................. 2-2

2.5 Programming Connector ..................................................................................... 2-3

SECTION 1 INSTALLATION INSTRUCTIONS

3.1 General ............................................................................................................ 3-1

3.2 Equipment Packing Log ...................................................................................... 3-1

3.3 Wiring Instructions ............................................................................................ 3-1

3.3.1 Combined Mode ................................................................................................ 3-1

3.3.2 Separate Mode ................................................................................................. 3-2

3.4 15-Pin Connector (J2)......................................................................................... 3-2

3.5 37-Pin Connector (J1)......................................................................................... 3-4

3.6 Hardware Installation ......................................................................................... 3-9

3.7 Post Install Test Procedure ................................................................................. 3-9

LIST OF FIGURES

FIGURE TITLE PAGE

2-1 AMS-6000 Operator’s Controls and Indicators ...................................................... 2-1

2-2 Smart RIB Cable - Wiring Diagram......................................................................... 2-3

2-3 Key Loading Cable - Wiring Diagram .................................................................... 2-3

3-1 Combined Mode Installation ................................................................................ 3-1

3-2 Separate Mode Installation .................................................................................. 3-2

3-3 Wiring Connections (Combined Mode) .................................................................. 3-6

3-4 Wiring Connections Separate Mode) .................................................................... 3-8

3-5 Outline Drawing for the AMS-6000 ...................................................................... 3-10

LIST OF TABLES

TABLE TITLE PAGE

3-1 15-Pin Connector (J2)......................................................................................... 3-2

3-2 37-Pin Connector (J1)......................................................................................... 3-4

TECHNISONIC INDUSTRIES LIMITED

www.til.ca

AMS-6000 Installation and Operating Instructions TiL 03RE325 Rev n/c Issue 5

This page left intentionally blank.

TECHNISONIC INDUSTRIES LIMITED

www.til.ca

AMS-6000 Installation and Operating Instructions TiL 03RE325 Rev n/c Issue 5

1-1

SECTION 1 – GENERAL DESCRIPTION

1.1 INTRODUCTION

The following document covers both the installation and operation of the AMS-6000 Audio

Mode Selector.

1.2 PURPOSE OF EQUIPMENT

The AMS-6000 Audio Mode Selector is designed to provide enhancements to a TDFM-

600/6000 series transceiver installation.

1.3 DESCRIPTION

The AMS-6000 is an audio mode selector box that is designed to work in conjunction with

the Technisonic TDFM-600/6000 series airborne FM transceivers. The AMS-6000 will

combine the audio and key lines from up to three separate RF Bands in a TDFM-6000 and

permit the TDFM-6000 to operate as a single transceiver from one position on an audio

controller. The TDFM-6000 which operates on three RF bands normally requires three

positions on an audio controller and the TDFM-600 normally requires two positions.

When the AMS-6000 is used in the “combined radio mode”, the receive signal from each of

the three RF bands is annunciated by a receive LED and the transmit selection/indication

functions for each band are also supported via transmit buttons with LED’s for each band.

Missions that require simultaneous operation of all three RF bands in a TDFM-6000 will also

benefit from the use of an AMS-6000. If the AMS-6000 is used in the “separate radio

mode”, all three RF bands of the TDFM-6000 are connected to three different audio

controller positions. Receive indication on any of the three bands is annunciated on the

AMS-6000. Transmit selection would be made via the audio controller in the separate radio

mode. Given that the TDFM-6000 will only display information about a single band at once,

the AMS-6000 will provide receive indication for all three bands and allow rapid response to

RF traffic over multiple bands along with simulcast and cross band repeat capability also

supported. The benefits of an AMS-6000 in the “separate radio mode” would be most

pronounced when it is utilized with a three band TDFM-6000 series transceiver.

The AMS-6000 transmit selection keys can also be used to simulcast the transmit function

on two or three of the RF bands or to invoke a cross band repeat function between any or

all of the 3 bands. The simulcast and cross band repeat functions are supported in either the

combined or separate radio modes. The AMS-6000 also provided a front panel connector to

allow PC memory frequency and encryption key programming for each of the bands in the

TDFM-6000 that it is installed with. This will pre-empt the requirement to wire a PC

programming connector from the TDFM-6000/600 to a bulkhead connector in the airframe.

1.4 MODEL VARIATION

There is only one version of the Model AMS-6000, P/N 031220-1. All units support both 5

and 28 volt back lighting and all are NVG compatible.

TECHNISONIC INDUSTRIES LIMITED

www.til.ca

AMS-6000 Installation and Operating Instructions TiL 03RE325 Rev n/c Issue 5

1-2

1.5 TECHNICAL CHARACTERISTICS

Specification Characteristic

GENERAL

Model Designation:

Audio Positions:

Audio Modes:

RX Audio Output in Combined mode:

RX Audio Output in Separate mode:

TX Audio inputs:

TX Audio outputs:

Physical Dimensions:

Weight:

Mounting:

Operating Temperature Range:

Power Requirement:

Voltage:

Current:

Back Lighting:

Display Colour:

AMS-6000

Combined or Separate

500mW into 600 ohms

(supplied by the TDFM-6000)

0.145vrms (-10 dBm) nominal

Approx. 5.2" X 1.1" X 5.75"

Approx. 13 oz. (370 g)

Panel Mount via DZUS fasteners

-30°C to +70°C

28.0 Vdc, ± 15%

2 amps max.

28 Volts or 5 Volts

NVG Compatible Green

Otros manuales para AMS-6000

Tabla de contenidos

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario