Tiiwee TWWS02 Manual de usuario

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
Tiiwee Door & Window Sensor TWWS02
(For indoor use only)
For the Tiiwee Home Alarm System
Introduction
Congratulations with your Tiiwee Door & Window sensor. It is intended to be used
in combination with the components of the Tiiwee Home Alarm System and can
be wirelessly connected to all Tiiwee 433 MHz Alarm Units.
Product Overview and Operation
The Door & window sensor consists of a magnet and a sensor which contains a
detector for changes in magnetic fields (‘flux’). When the magnet is moved away
from the sensor, the detector will detect that motion and will send a wireless
signal to the Tiiwee Alarm unit. The Tiiwee Alarm unit will now emit a strong
alarm sound or a chime depending on the settings of the Alarm unit.
Connecting the Door & Window sensor to an Alarm Siren
This door & window sensor is compatible with the Tiiwee Home Alarm System.
Connect it wirelessly with one of the 433 MHz Tiiwee Alarm Units.
The instructions for pairing the Door & Window sensor with the Tiiwee Home
Alarm System are included with the Tiiwee Alarm units, or can be found on our
website www.tiiwee.com or one of our Youtube channels.

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
General Installation Guidelines
GENERAL GUIDELINES:
•Do not install the Door/Window sensors on breakable material, but
choose instead the frame of a window to attach your Door/window
sensor.
•Do not install on instable parts.
•Do not install the sensor near magnetic parts - that might trigger the
alarm by accident.
•Clean the surface before installation if the tape will be used for
attachment.
•It is important that the sensor and the magnet are placed on the door
and frame respectively to allow an alarm to be triggered when sensor
and magnet are separated.
Installation of the Door & Window Sensor
IMPORTANT - PLEASE NOTE:
•It is important that the sensor and magnet are aligned correctly. Align
the small triangle markers at the sides of the sensor and magnet for
perfect operation
•The distance between the sensor and the magnet should not exceed
8mm.
Installation examples
Various installation examples are shown at the first page of this manual.

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
Image 1: Door and doorpost are at the same level. Sensor and magnet are
positioned next to each other and the triangle markers are aligned.
Image 2: The door or doorpost are at uneven levels with the door
protruding relative to the doorpost. Mount the magnet sideways on the
top of the door and position the sensor with a few millimetres distance on
the doorpost aligning the triangle markers on the sides of the sensor and
magnet.
Image 3: The door or doorpost are at uneven levels with the doorpost
protruding relative to the door. Mount the sensor sideways to the
doorpost and then position the magnet on the door with a few millimetres
distance aligning the triangle markers on the sides of the sensor and
magnet.
Installation
•Make sure that both the installation surfaces are clean and free from
grease and dust.
Magnet:
•Installation with screws: Using a small screwdriver or the tip of a small
knife, remove the cover from the magnet by lifting the cover at the top
of the magnet. Then, position the magnet at the desired position. Now,
reposition the cover carefully on the magnet making sure not to damage
the small clips.
•Installation with double sided tape: peel off the protective foil from one
side and stick the tape onto the magnet. Then, peel off the other part of
protective foil and stick the magnet onto the door or doorpost.
Sensor:
Before installing the sensor, please assure that both the magnet and
sensor will be aligned as described above.
•Installation with screws: Using a small screwdriver or the tip of a small

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
knife, remove the cover from the sensor by lifting the cover at the top of
the sensor. Then, position the sensor at the desired position. Now,
reposition the cover carefully on the sensor making sure not to damage
the clips.
•Installation with double sided tape: Peel off the protective foil from one
side of the tape and stick the tape onto the sensor. Then, peel off the
other part of protective foil and stick the sensor onto the door or
doorpost.
Test your door sensor
1. After the installation, open the window or door.
2. The red indicator light on the front of the sensor will flash once.
3. The sensor is now properly setup.
Low battery indicator
If the red control light on the sensor flashes every 3 seconds the battery needs to
be replaced.
Replacing the Battery
•Place a screwdriver or knife in the opening at the bottom and use it as a
lever to lift the case from the back plate.
•Take out the old battery and replace it with a fresh 12V/23A alkaline
battery - please note the correct polarity
•Put the battery cover back in place and push it until you hear a click

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
Technical Specifications
Model No.: TWWS02
Transmission Distance: 100m (Open Area)
Transmission Frequency: 433MHz
Operating Voltage: 12V
Size:72×21×15mm
Magnet Size:40×11×13mm

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
Tiiwee Tür & Fenster Sensor TWWS02
(für den inneren Gebrauch)
Für Tiiwee Home Alarm System
Einführung
Wir beglückwünschen Sie zum Kauf des Tiiwee Tür & Fenster Sensors. Der Sensor
ist ein Teil des Tiiwee Home Alarm Systems und kompatibel mit allen Tiiwee 433
MHz Alarmeinheiten.
Produktübersicht und Gebrauch
Der Tür & Fenster Sensor besteht aus dem Magneten und dem Sensor, welcher
Änderungen in der magnetischen Feldstärke misst. Wenn der Magnet und der
Sensor voneinander getrennt werden, wird dies durch den Sensor
wahrgenommen und ein drahtloses Signal wird an die verbundene Alarmeinheit
gesendet. Die Alarmeinheit wird dann entweder einen lauten Alarm oder einen
Benachrichtigungston abgeben - je nach den vorgenommenen Einstellungen.
Verbinden des Tür & Fenster Sensors mit einer Alarmeinheit
Der Tiiwee Tür & Fenster Sensor ist kompatibel mit dem Tiiwee Home Alarm
System und verbindet sich drahtlos mit den Tiiwee 433 MHz Alarmeinheiten.
Die Anleitung zum Verbinden des Tür & Fenster Sensors mit dem Tiiwee Home
Alarm System finden Sie in den entsprechenden Anleitungen der Tiiwee

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
Alarmeinheiten. Alternativ können diese auch von unserer Webseite
www.tiiwee.com heruntergeladen werden. Sie finden ebenfalls Information in
unserem Youtube-Kanal.
Installation des Tür & Fenster Sensors
ALLGEMEINE RICHTLINIEN:
•Installieren Sie den Tür & Fenster Sensor nicht auf leicht brechbarem
Untergrund - ein solider Untergrund wie beispielsweise ein Fenster- oder
Türrahmen sind empfohlen.
•Installieren Sie den Tür & Fenster Sensor nicht auf instabilen Untergründen.
•Installieren Sie den Tür & Fenster Sensor nicht in der Nähe von
magnetischen Teilen, da dies zu einer Fehlauslösung führen könnte.
•Reinigen Sie die Installationsfläche bitte gründlich, wenn Sie das
mitgelieferte Klebeband verwenden möchten.
•Eine korrekte Installation des Sensors und des Magneten an der Tür und
dem Türrahmen sind von entscheidender Bedeutung für eine korrekte
Funktion.
Installation des Tür- und Fenstersensors
WICHTIG - BITTE BEACHTEN SIE:
•Es ist wichtig, dass Sensor und Magnet korrekt ausgerichtet sind.
Richten Sie die kleinen Dreiecksmarkierungen an den Seiten von Sensor
und Magnet für einen einwandfreien Betrieb aus.
•Der Abstand zwischen Sensor und Magnet darf 8 mm nicht
überschreiten.

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
Installationsbeispiele
Auf der ersten Seite dieses Handbuchs sind verschiedene
Installationsbeispiele aufgeführt.
Bild 1: Tür und Türpfosten befinden sich auf gleicher Ebene. Sensor und
Magnet sind nebeneinander positioniert und die Dreiecksmarker sind
ausgerichtet.
Bild 2: Die Tür und der Türpfosten sind nicht auf der gleichen Ebene,
wobei die Tür in Bezug auf den Türpfosten vorsteht. Montieren Sie den
Magneten seitlich auf der Oberseite der Tür und positionieren Sie den
Sensor mit einigen Millimetern Abstand auf dem Türpfosten, indem Sie die
Dreiecksmarkierungen an den Seiten von Sensor und Magnet ausrichten.
Bild 3: Die Tür und der Türpfosten sind nicht auf der gleichen Ebene,
wobei der Türpfosten in Bezug auf die Tür vorsteht. Montieren Sie den
Sensor seitlich am Türpfosten und positionieren Sie dann den Magneten
mit einigen Millimetern Abstand auf der Tür, wobei Sie die
Dreiecksmarkierungen an den Seiten von Sensor und Magnet ausrichten.
Installation
•Achten Sie darauf, dass beide Montageflächen sauber, fett- und staubfrei
sind.
Magnet:
•Montage mit Schrauben: Entfernen Sie die Abdeckung vom Magneten
mit einem kleinen Schraubendreher oder der Spitze eines kleinen
Messers, indem Sie die Abdeckung an der Oberseite des Magneten
anheben. Montieren Sie dann den Magneten an der gewünschten
Position. Positionieren Sie nun die Abdeckung vorsichtig auf dem
Magneten und achten Sie darauf, dass die kleinen Clips nicht beschädigt
werden.
•Montage mit doppelseitigem Klebeband: Ziehen Sie die Schutzfolie von
einer Seite ab und kleben Sie das Klebeband auf den Magneten. Dann

Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
ziehen Sie den anderen Teil der Schutzfolie ab und kleben den Magneten
auf die Tür oder den Türpfosten.
Sensor:
Bevor Sie den Sensor installieren, stellen Sie bitte sicher, dass sowohl der
Magnet als auch der Sensor wie oben beschrieben ausgerichtet sind.
•Montage mit Schrauben: Entfernen Sie mit einem kleinen
Schraubendreher oder der Spitze eines kleinen Messers die Abdeckung
vom Sensor, indem Sie die Abdeckung an der Oberseite des Sensors
anheben. Montieren Sie dann den Sensor an der gewünschten Position.
Setzen Sie nun die Abdeckung vorsichtig wieder auf den Sensor und
achten Sie darauf, dass die Clips nicht beschädigt werden.
•Montage mit doppelseitigem Klebeband: Ziehen Sie die Schutzfolie von
einer Seite ab und kleben Sie das Band auf den Sensor. Ziehen Sie dann
den anderen Teil der Schutzfolie ab und kleben Sie den Sensor auf die Tür
oder den Türpfosten.
Testen Sie Ihren Türsensor
1. Öffnen Sie nach der Installation das Fenster oder die Tür.
2. Die rote Kontrollleuchte an der Vorderseite des Sensors blinkt einmalig.
3. Der Sensor ist nun richtig eingestellt.
Batterie-Kontrollanzeige
Die Batterie muss ersetzt werden, wenn die rote Kontrollleuchte alle 3 Sekunden
aufleuchtet.
Austauschen der Batterie
•Platzieren Sie einen kleinen Schraubenzieher oder ein Messer an der
Öffnung am unteren Teil des Sensors und trennen Sie vorsichtig das
Sensorgehäuse von der Montageplatte.
•Ersetzen Sie die Batterie durch eine neue 23A/12V Batterie - achten Sie auf
die korrekte Polarität.
Tabla de contenidos
Idiomas:
Otros manuales de Sensor de seguridad de Tiiwee

Tiiwee
Tiiwee PIR Manual de usuario

Tiiwee
Tiiwee Motion Sensor Alarm Manual de usuario

Tiiwee
Tiiwee TWGBA01 Manual de usuario

Tiiwee
Tiiwee TWWS01 Manual de usuario

Tiiwee
Tiiwee TWDS01 Manual de usuario

Tiiwee
Tiiwee TWPIR02 Manual de usuario

Tiiwee
Tiiwee DRIVEWAY ALERT ALARM Instrucciones de funcionamiento y seguridad

Tiiwee
Tiiwee X1 Manual de usuario

















