Thundercomm EB5 Instrucciones de uso

Thundercomm EB5 Edge AI Box

Hardware User Manual

Rev. V1.7

July 14, 2021

Thundercomm EB5 Edge AI Box Hardware User Manual

Revision History

Revision Date Description

1.0 Jan 25, 2021 Initial release

1.1 May 25, 2021 Update the pictures of figure

1.2 June 7,2021 Update some points

1.3 June 8,2021 Update some points

1.4 June 22,2021 Change description of Phoenix terminal

1.5 June 28,2021 Add certification information in 2.4.Product Specifications

1.6 July 8,2021 Delete the Bluetooth discription in Table 3-9

1.7 July 14,2021 Add Chapter 5.Warranty & Product Support Service

Thundercomm EB5 Edge AI Box Hardware User Manual

Table List

Table 1-1.Safety sign list

Table 2-1.EB5 Specifications

Table 3-1.Front view light location and specification

Table 3-2.Front view connector location and specification

Table 3-3.Front view button location and specification

Table 3-4.Rear view Ethernet light location and specification

Table 3-5.Rear view connector location and specification

Table 3-6.Phoenix terminal 1 description

Table 3-7.Phoenix terminal 2 description

Table 3-8.Phoenix terminal 3 description

Table 3-9.Left view antenna description

Thundercomm EB5 Edge AI Box Hardware User Manual

About This Document

Illustrations in this documentation might look different from your product.

Depending on the model, some optional accessories, features, and software programs might not be available

on your device.

Depending on the version of operating systems and programs, some user interface instructions might not be

applicable to your device.

Documentation content is subject to change without notice. Thundercomm makes constant improvements on

the documentation of your computer, including this guidebook.

Button, tool, and key names appear in bold font, for example, click Save or press Enter.

Folders and files are formatted in italic, for example, turbox_flash_flat.sh.

Thundercomm EB5 AI Box Hardware User Manual

- 1 -

Table of Contents

Chapter 1. Safety ...............................................................................................................................- 2 -

1.1. General safety precautions.................................................................................................................- 2 -

1.1.1. Local laws and regulations ........................................................................................................................................ - 2 -

1.1.2. Basic installation requirements................................................................................................................................ - 2 -

1.1.3. Grounding requirements ........................................................................................................................................... - 2 -

1.1.4. On operator .................................................................................................................................................................. - 2 -

1.1.5. On equipment .............................................................................................................................................................. - 3 -

1.1.6. Marks on equipment .................................................................................................................................................. - 3 -

1.1.7. Electrical safety ............................................................................................................................................................ - 3 -

1.2. Safety and caution information..........................................................................................................- 5 -

Chapter 2. Introduction ....................................................................................................................- 6 -

2.1. Overview...............................................................................................................................................- 6 -

2.2. Key features..........................................................................................................................................- 7 -

2.3. Usage scenario .....................................................................................................................................- 7 -

2.4. Product specifications .........................................................................................................................- 8 -

Chapter 3. Hardware Description ................................................................................................. - 10 -

3.1. Hardware system architecture ........................................................................................................ - 10 -

3.2. System architecture.......................................................................................................................... - 11 -

3.3. Hardware specifications................................................................................................................... - 11 -

Chapter 4. Hardware Operation ................................................................................................... - 17 -

Chapter 5. Warranty & Product Support Service ........................................................................ - 18 -

5.1. Customer support have two methods:........................................................................................... - 18 -

5.2. Fix broken device .............................................................................................................................. - 18 -

5.3. Scope of Warranties: ........................................................................................................................ - 18 -

Appendix 1. Notices ...................................................................................................................... - 19 -

Appendix 2. Trademarks ............................................................................................................... - 20 -

Thundercomm EB5 Edge AI Box Hardware User Manual

- 2 -

Chapter 1. Safety

Read this chapter first before installing, operating, or maintaining equipment developed by Thundercomm.

1.1. General safety precautions

To ensure the safety of person and equipment, follow all the safety precautions on the device identification and

in this manual when installing, operating, and maintaining equipment.

Notes, warnings, and hazards in the manual do not represent all safety matters that should be observed. It is

intended only as a supplement to all safety considerations.

1.1.1. Local laws and regulations

When you operate the device, please comply with local laws and regulations. Safety precautions in this manual are

intended only as a supplement to local safety regulations.

1.1.2. Basic installation requirements

The person responsible for installing and maintaining Thundercomm equipment must first be trained strictly and

know all kinds of safety precautions. He must also master the correct operating methods before he can install,

operate, and maintain the equipment.

Only qualified and trained personnel are allowed to install, operate and maintain the equipment.

Only qualified professionals are allowed to remove safety facilities and repair equipment.

Replacing and changing equipment or parts, including software, must be done by a person certified or authorized

by Thundercomm.

The operator shall promptly report to the person in charge any failure or error that may cause a safety problem.

1.1.3. Grounding requirements

The following requirements apply only to equipment requiring grounding:

When installing equipment, it is necessary to first ground; When removing the equipment, remove the ground

wire last.

Do not destroy the ground conductor.

Do not operate equipment without a grounded conductor installed.

The equipment shall be permanently attached to the protected area. Check electrical connections before

operating equipment. Please ensure that the equipment is reliably grounded.

1.1.4. On operator

Do not operate equipment and cables during thunderstorms.

When thunderstorm weather, you should unplug the AC power connector, prohibit the use of fixed terminals, do

not touch the terminal and antenna connector.

Instructions: The above two requirements apply to wireless fixed station terminals.

To avoid shock hazards, do not connect safety extra low Voltage (SELV) circuit terminals to communication

network voltage (TNV) circuit terminals.

It is forbidden to look directly at the fiber outlet with the open eye to prevent the laser beam from burning the

eye.

Before operating the equipment, you should wear antistatic work clothes and anti-static gloves or wristbands.

Remove conductive objects such as jewelry and watches to avoid being shocked or burned.

If there is a fire, you should evacuate the building or equipment area and press the fire alarm bell, or call the fire

Thundercomm EB5 Edge AI Box Hardware User Manual

- 3 -

alarm number. No re-entry into the burning building is allowed under any circumstances.

1.1.5. On equipment

Before operation, the equipment should be reliably fixed on the floor or other stable objects, such as walls or

mounting frames.

Do not block the vent when the system is running.

When installing the panel, if the screws need to be tightened, you must use tools.

After installing the equipment, please clear the empty packing materials in the equipment area.

1.1.6. Marks on equipment

Refer to the table below to comprehend safety signs.

Table 1-1.Safety sign list

Graphic Name Instructions

Warning signs The logo indicates that improper operation may result in

equipment damage or personal injury.

External ground

marking

This mark is the grounding mark outside the equipment. The

two ends of the grounding cable are connected to different

equipment, which means that the equipment must be earthed

at the connecting point, so as to ensure the normal operation of

the equipment and the personal safety of operators.

Internal ground

mark

This mark is the grounding mark inside the equipment. Both

ends of the grounding cable are connected to different

components of the same equipment, which means that the

equipment must be grounded through the connecting point to

ensure the normal operation of the equipment and the

personal safety of operators.

Antistatic mark

This mark indicates an electrostatic sensitive area. Do not touch

the device with your bare hands. When operating in this area,

take strict anti-static measures, such as wearing anti-static wrist

bands or anti-static gloves.

1.1.7. Electrical safety

High Pressure

Notice:

High voltage power supply provides power for the operation of equipment. Direct contact with high

voltage power supply or indirect contact with high voltage power supply through wet object will bring

fatal danger.



Improper and incorrect operation of high voltage may cause accidents such as fire or electric shock.

Thundercomm EB5 Edge AI Box Hardware User Manual

- 4 -

Thunderstorm Weather

This requirement applies only to wireless base stations or devices with skylines.

Notice: It is forbidden to operate the tower and mast under the thunderstorm, otherwise there will be

danger of life.

Big Leakage Current

Notice:

The equipment must be grounded before the power is switched on, otherwise it will endanger the safety

of person and equipment.



If there is a "large leakage current" sign pasted near the power terminal of the equipment, the

protective grounding terminal of the equipment housing must be grounded before connecting the AC

input power to prevent the leakage current of the equipment from causing electric shock to the human

body.

Power Cord

Notice:

Do not install or remove the power cord live. The moment the power core touches the conductor, it will

produce electric arc or spark, which can lead to fire or eye injury.

The power switch must be turned off before the power cord is installed or removed.

Before connecting the power cord, make sure that the power cord label is correctly identified before

connecting.

Fuse

Notice: To ensure the safe operation of the equipment, when the fuse on the equipment is blown, the

fuse of the same model and specification should be replaced.

Electrostatic Discharge

Notice:

Static electricity generated by the human body will damage electrostatic sensitive components on the

single board, such as large-scale integrated circuit (LSI) and so on.

In the case of human body movement, clothing friction, shoes and floor friction or holding ordinary

plastic products, the human body will generate electrostatic electromagnet

ic field, not easy to

disappear before discharge.

Before touching the equipment and holding the single board or special integrated circuit (ASIC) chip,

the anti-static wrist band must be worn and the other end of the anti-static wrist band must be well

grounded to prevent the body's electrostatic damage to sensitive components.

Thundercomm EB5 Edge AI Box Hardware User Manual

- 5 -

Anti-static wristband:

Figure 1-1. Anti-static wristband

1.2. Safety and caution information

AC Power Adapter: Risk of electric shock, fire, or burn if using an AC adapter other than the one provided with this

device, Indoor use only and in dry locations. Device must only be repaired by a professional, do not open enclosure.

The rated parameter of the adapter is 19v / 6.32a, 120W, please use the socket with grounding wire.

Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible.

Disposal of used batteries must be in accordance with local environmental regulations.

Failure to use the included power adapter shall violate regulatory compliance requirements and may expose

the user to safety hazards.

Medical: This device may interfere with the operation of some pacemakers, hearing aids or other medical devices.

To reduce the risk, maintain a separation distanceof20cm(8inches) between the device and the medical device.

Refer to the medical device for additional information.

Modify: Modification of the wireless solution, thermal solution, device components or enclosure shall violate

regulatory compliance requirements and may induce safety hazards.

Thundercomm EB5 Edge AI Box Hardware User Manual

- 6 -

Chapter 2. Introduction

2.1. Overview

EB5 Edge AI box is a lightweight edge device, featuring powerful AI and video decode capabilities. It supports device-

edge-cloud synergy, remote algorithm and application deployment, FOTA and DM. It can be widely used in complex

environments such as industial park, urban residential areas and shopping mall.

EB5 is Thundercomm lightweight edge device for a wide range of edge applications, featuring strong AI computing

performance, flexible configuration, wide temperature range support, environmental adaptability, and easy

maintenance and management. EB5 is mainly used as edge gateway and edge intelligent analysis device to deploy

in various edge application scenarios such as smart building, smart car, smart re.

Figure 2-1. Top View

Figure 2-2. Front View

Figure 2-3. Rear View

Figure 2-4. Side View

Otros manuales para EB5

Tabla de contenidos

Otros manuales de Microcontrolador de Thundercomm

Thundercomm

Thundercomm TurboX C450 Manual de usuario

Thundercomm

Thundercomm Qualcomm Robotics RB5 Instrucciones de uso

Thundercomm

Thundercomm C40 Series Manual de usuario

Thundercomm

Thundercomm TurboX C4290 Manual de usuario

Thundercomm

Thundercomm TurboX C4290 Instrucciones de uso

Thundercomm

Thundercomm TurboX C6490 Manual de usuario

Thundercomm

Thundercomm TurboX C6490P Manual de usuario

Thundercomm

Thundercomm TurboX SDW4100 Manual de usuario

Thundercomm

Thundercomm TurboX C865C Manual de usuario

Thundercomm

Thundercomm TurboX D660 Manual de usuario

Thundercomm

Thundercomm TurboX C2290 Manual de usuario

Thundercomm

Thundercomm TurboX AI Kit Guía

Thundercomm

Thundercomm TurboX CM6125 Instrucciones de uso

Thundercomm

Thundercomm TurboX CT7280 Development Kit Manual de usuario

Thundercomm

Thundercomm TurboX C610 Open Kit Manual de usuario

Thundercomm

Thundercomm TurboX C2210 Manual de usuario

Thundercomm

Thundercomm TurboX C8550 Manual de usuario

Thundercomm

Thundercomm TurboX C865 Dev Kit Manual de instalación

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario