Thule VERTEX SWING AWAY Manual de usuario

QUICK START

GUIDE for:

VERTEX SWING AWAY

9031XT

- Attach swing arm and upright

assembly as shown (STEP 1).

- Install in receiver and bolt

with washer and lock washer

(STEP 3).

- Load heaviest bike ﬁrst- front

to the right. (STEP 7).

- Alternate bike direction.

- Secure bicycle to rack with

rubber straps and black safety

strap through the frames and

around the mast of the rack

(STEP 9).

- Check tightness of all bolts

and knobs periodically.

(every 6 months).

- Check rubber straps for wear

and replace if worn.

- Install on a trailer or other

towed vehicle.

- Put more than 2 bikes on a

class 1 hitch.

- Do not “overstretch” the

straps.

- Use the rack while traveling

on dirt roads.

- Use the rack to carry tandems

or recumbents.

- Put more than the intended

number of bikes on the rack.

DO NOT

506-7079

North American English

PARTS INCLUDED

G M

K J

F E

B C

VERTEX

SWING AWAY

9031XT

506-7079

part description part number qty.

AVertex Swing Bike Carrier — 1

Banti sway cage hold fast 8522903001 4

Canti sway angled extension 85231080012

Dbuckle strap 753203017 1

Eripple strap 8523006001 12

Fhitch tool 8535524 1

G1/2 - 13 bolt x 5.5" 8535583 2

Hstinger assembly 2" swing — 1

Iswing arm assembly — 1

Jlock washer 12mm 956122159 1

Kwasher 12mm 951122454 5

L1/2" lock nut 853558402 2

Mhex bolt 908124054 1

Nhold fast cradle 8523005002 8

O.75 open end wrench 85231380011

Plock cylinder and 2 keys — —

Qlock cylinder change key 8531251 1

Rlocking end cap 85232940011

Snon-locking end cap 8523293001 1

506-7079

CARRIER ASSEMBLY

- A. Position stinger assembly in bracket of swing arm assembly as

illustrated.

- Install 1/2 – 13 x 5.5” bolt, ﬂat washer and lock nut as illustrated.

- Tighten ﬁrmly using Thule tools provided.

CARRIER ASSEMBLY

- B. Position upright assembly in swing arm assembly bracket as

illustrated.

- Engage lock-up pin and loosely thread lower locking handle.

- Install 1/2 – 13 x 5.5” bolt, ﬂat washer and lock nut as illustrated.

- Tighten ﬁrmly using Thule tools provided.

A B

506-7079

TRANSPORTING CARRIER

- Carrier can be easily handled / carried using handhold at the back of the

carrier.

- Insert base into receiver.

- Assemble hitch pin, M12 lock washer, and M12 washer as shown.

- Tighten ﬁrmly using hitch tool (K) provided.

506-7079

BICYCLE TRANSPORTATION

- A. Lift Hitch Switch Lever as illustrated.

- B. With the other hand lift bike arm assembly upward until the Hitch

Switch “clicks” into position.

- Reverse operation to store or when traveling with no bike attached.

- Attach cradle strap to cradle.

506-7079

- Attach anti-sway angled extension to underside of cradles 1 and 4 as

illustrated.

6A B C

- A. Load heaviest bike ﬁrst onto the inner most cradles - handle bars

facing passenger side of vehicle.

- B. Fasten cradle straps.

- Use 982XT Frame Adaptor (#982XT, sold separately) for bikes without

traditional top tubes.

506-7079

ATTACHING HOLD FAST ANTI-SWAY CAGES

- A. To attach anti-sway cage, hold horizontal with smooth edge facing

down and slide C-slot opening onto Anti-sway Extension / Cradle.

- B. Swing down to vertical position. Place smooth curved surface against

bicycle and attach strap as shown.

- Mount bikes in alternate directions.

- Secure bikes to mast of carrier with black strap.

506-7079

REAR COMPARTMENT ACCESS

- A. Remove hold-open pin. Loosen lower locking handle completely and

pull pin to open carrier.

- B. While pushing bottom half of bike arm assembly open, rotate upright

assembly as illustrated. In full open position lock-up pin will engage

bracket.

lock-up pin

lower locking handle

OPENING CARRIER

- A. Insert hold open pin into locking position when fully open to prevent

carrier from swinging closed.

- B. Hold-open pin.

506-7079

CLOSING CARRIER

- A. Remove hold-open pin. Pull lock up pin to release upper arm assembly and rotate bike arms to stop position.

- B. Close carrier. Lock-up pin will click into closed position.

- Tighten lower locking handle ﬁrmly.

- WARNING: Before operating your vehicle, tighten locking handle ﬁrmly.

A B

lock-up pin

lower locking handle

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Thule

Thule

Thule 4029 Manual de usuario

Thule

Thule 650 Manual de usuario

Thule

Thule 195 Manual de usuario

Thule

Thule SnowPack 7322 Manual de usuario

Thule

Thule 145134 Manual de usuario

Thule

Thule 1682 Manual de usuario

Thule

Thule Rapid System 1788 Manual de usuario

Thule

Thule clipon 9103 Manual de usuario

Thule

Thule 1258 Manual de usuario

Thule

Thule 99 Guía

Thule

Thule Kit 1051 Manual de usuario

Thule

Thule 217 Manual de usuario

Thule

Thule 4002XT Manual de usuario

Thule

Thule 285 Manual de usuario

Thule

Thule Rapid 1451 Manual de usuario

Thule

Thule Top Deck 881 Manual de usuario

Thule

Thule Rapid Fixpoint XT 3005 Manual de usuario

Thule

Thule CIRCUIT 526 Guía de configuración

Thule

Thule 301477 Manual de usuario

Thule

Thule RaceWay 991 Manual de usuario

Thule

Thule 152 Guía

Thule

Thule 1346 Manual de usuario

Thule

Thule Rapid System 751 Manual de usuario

Thule

Thule 1083 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario

Prorack

Prorack K1163 Manual de usuario