Thrustmaster T300 RS Manual de usuario

Update: January 2024 
 
 T300 RS Racing Wheel 
Wake-up method (Bootloader) 
 
T300 RS ; T300 SERVO BASE ; T300 Ferrari GTE ;  
T300 Ferrari Integral Alcantara Edition ; T300RS GT Edition 
 
English: My T300 RS will not power on and is not detected or 
recognized by my PC or games console - Wake-up method 
(Bootloader) 
 
Français : Mon T300 RS ne s’allume pas et n’est pas détecté ni reconnu 
par mon PC ou ma console de jeux – Méthode de réveil (Bootloader)

Update: January 2024 
Deutsch: Mein T300 RS lässt sich nicht einschalten und wird von 
meinem PC oder meiner Spielekonsole nicht erkannt - Wake-up method 
(Bootloader) 
 
Español: Mi T300 RS no enciende y mi PC o consola de juegos no lo 
detecta ni reconoce - Método de reactivación (Bootloader) 
 
Italiano: Il mio T300 RS non si accende e non viene rilevato o 
riconosciuto dal mio PC o dalla mia console di gioco - Metodo di 
riattivazione (Bootloader) 
 
Português: Meu T300 RS não liga e não é detectado ou reconhecido 
pelo meu PC ou console de jogos - Método de reativação (Bootloader) 
 
Nederlands: Mijn T300 RS gaat niet aan en wordt niet gedetecteerd of 
herkend door mijn pc of gameconsole - Wekmethode (Bootloader) 
 
日本語: T300 RS の電源が入らず、PC またはゲーム コンソールで検出また
は認識されません - ウェイクアップ方法 (Bootloader) 
 
简体中文: 我的 T300 RS 无法开机，并且无法被我的电脑或游戏机检测
到或识别 - 唤醒方法 (Bootloader) 
 
한국어: 내T300 RS 가켜지지 않고 PC 나게임 콘솔에서 감지 또는 
인식되지 않습니다. - 절전 모드 해제 방법(Bootloader)

Update: January 2024

My T300 RS will not power on and is not detected or recognized by my

PC or games console - Wake-up method (Bootloader)

System requirements: PC running Windows® 10 or more recent

In this article we give you the procedure to follow to try to wake up your T300 RS

racing wheel.

Important note:

The wake-up procedure only applies in the specific case whereby the racing wheel

base will not power on

-The racing wheel does not self-calibrate (automatic movements of the

wheel rim from left to right).

-No LEDs light up on the racing wheel’s servo base.

Things to verify before getting started

-It is imperative that a Thrustmaster wheel be mounted on the servo base

of the T300 RS.

-It is imperative to follow the connection instructions.

oThe power plug must be properly plugged into a wall outlet

▪We recommend that you avoid using an extension cord,

power strip or current transformer

oThe racing wheel base will have be directly connected to a USB

port on the PC

▪We recommend that you avoid using a USB hub, a USB

extension, or any other type of connection extension

Tip on connecting the power cable to the back of the servo base.

-Make sure the plug is firmly inserted.

Update: January 2024

1) Make sure that you have installed the latest PC - DRIVERS FORCE

FEEDBACK driver on your PC

If necessary, you will find the driver for your device on our website, in the Drivers

section:

https://support.thrustmaster.com/product/t300rs/

Restart your computer to complete the update.

2) Plug the T300 RS power plug into a wall outlet

-DO NOT CONNECT the racing wheel to your PC’s USB before being

prompted to do so.

3) Make sure your T300 RS is in PC mode

-The sliding switch must be on PC or PS3

4) Simultaneously press and hold the L3 and R3 buttons

5) Connect the T300 RS directly to a PC USB port by holding down the L3 and

R3 buttons

-Wait about 3 seconds then release the L3 and R3 buttons.

Update: January 2024

6) Launch the firmware updating app on your PC.

Click in the Windows search magnifying glass field (located on your PC’s taskbar),

type Firmware Update and then click to launch the app.

7) The "Thrustmaster – Firmware Updater" window appears onscreen

-Device: shows the device in [Boot] mode

-Firmware: displays the firmware version that will be applied to the device

Update: January 2024

Note: If nothing is displayed in the Device or Firmware sections, repeat the

entire procedure from the beginning — but this time connecting the USB

connector to another USB port on your computer (or perform the procedure on

a different computer).

Also, if you have a desktop PC, we recommend using a USB port located on

the back of the central unit.

8) Click OK to carry out the firmware update

9) Wait while the Firmware is updating

-Wait for the Firmware to load

oDO NOT DISCONNECT the racing wheel from the PC's USB port.

oDO NOT UNPLUG the power supply.

Update: January 2024

The firmware updating app will then let you know whether the procedure has been

successful.

The racing wheel self-calibrates (automatic movements of the wheel rim from left to

right), and its LED lights up again.

Click OK then close the Firmware updater.

Note: In the event that this procedure fails, repeat the entire procedure from the

beginning — but this time connecting the USB connector to another USB port

on your computer (or perform the procedure on a different computer).

If the problem persists, please contact our technical support team: they will

provide you with other solutions.

10) Test your T300 RS in the Control Panel

On your keyboard, simultaneously press the Windows and R keys

-The Run window opens: type joy.cpl and then click OK

Update: January 2024

The Game Controllers window opens: select your product’s name, and then click

Properties.

You are now ready to play!

Update: January 2024

Mon T300 RS ne s’allume pas et n’est pas détecté ni reconnu par mon

PC ou ma console de jeux – Méthode de réveil (Bootloader)

Système requis : PC avec Windows® 10 ou plus récent

Dans cet article nous vous donnons la procédure à suivre pour tenter de réveiller

votre volant T300 RS.

Attention :

La procédure de réveil s’applique uniquement si la base du volant ne s’allume pas.

-Le volant ne calibre pas (mouvement automatique de la roue de droite à

gauche)

-Aucun voyant ne s'allume sur le servo base

Points à vérifier avant de commencer

-Il est impératif qu’une roue Thrustmaster soit montée sur le servo base

du T300 RS

-Il est impératif de respecter les consignes de branchements

oLa prise de courant devra être directement branchée à une prise

murale

▪Nous recommandons d'éviter l'utilisation de rallonge, de

multiprise ou de transformateur de courant.

oLe volant devra être directement connecté à un port USB du PC

▪Nous recommandons d'éviter l'utilisation de HUB USB, de

rallonge USB et toute extension de branchement.

Conseil au sujet du branchement du câble d’alimentation à l’arrière du servo base

-Assurez-vous que la prise est fermement insérée

Update: January 2024

1) Assurez-vous d’avoir installé sur votre PC le dernier pilote PC - DRIVERS

FORCE FEEDBACK

Si nécessaire vous trouverez le pilote de votre appareil sur notre site, dans la section

Pilotes :

https://support.thrustmaster.com/product/t300rs/

Redémarrez l’ordinateur pour finaliser l’installation.

2) Branchez la prise d’alimentation du T300 RS à une prise murale

-NE CONNECTEZ PAS le volant au port USB de votre PC avant d’être

invité à le faire.

3) Assurez-vous que votre T300 RS est en mode PC

-Le sélecteur doit être sur PC ou PS3

4) Pressez simultanément et maintenez les boutons L3 et R3

5) Connectez le T300 RS directement à un port USB du PC en maintenant les

boutons L3 et R3 appuyés

-Patientez environ 3 secondes puis relâchez les boutons L3 et R3

Otros manuales para T300 RS

Tabla de contenidos

Idiomas:

Otros manuales de Controladores de videojuegos de Thrustmaster

Thrustmaster

Thrustmaster Rechargeable Wireless Dual Trigger 2-in-1 Manual de usuario

Thrustmaster

Thrustmaster ferrari 458 spider Manual de usuario

Thrustmaster

Thrustmaster TX Leather Edition Manual de usuario

Thrustmaster

Thrustmaster Ferrari Manual de usuario

Thrustmaster

Thrustmaster SIMTASK FARMSTICK Manual de usuario

Thrustmaster

Thrustmaster T150 Manual de usuario

Thrustmaster

Thrustmaster T500RS Manual de usuario

Thrustmaster

Thrustmaster TOP GUN AfterBurner Force Feedback Manual de usuario

Thrustmaster

Thrustmaster GPX LightBack Manual de usuario

Thrustmaster

Thrustmaster HOTAS Cougar Instrucciones de uso

Thrustmaster

Thrustmaster T100 Force Feedback Manual de usuario

Thrustmaster

Thrustmaster T80 Ferrari 488 GTB Edition Manual de usuario

Thrustmaster

Thrustmaster T-WIRELESS NW Manual de usuario

Thrustmaster

Thrustmaster Thrustmaster Force Feedback Racing Wheel Manual de usuario

Thrustmaster

Thrustmaster T150 Manual de usuario

Thrustmaster

Thrustmaster TH8A Manual de usuario

Thrustmaster

Thrustmaster T-LCM Pedals Manual de usuario

Thrustmaster

Thrustmaster Ferrari F1 Wheel Add-on Manual de usuario

Thrustmaster

Thrustmaster Enzo Ferrari wireless Manual de usuario

Thrustmaster

Thrustmaster TCA Quadrant Add-On Airbus Edition Manual de usuario

Thrustmaster

Thrustmaster T.FLIGHT STICK X Manual de usuario

Thrustmaster

Thrustmaster T500 RS Manual de usuario

Thrustmaster

Thrustmaster TM OpenWheel Add-On Manual de usuario

Thrustmaster

Thrustmaster HOTAS WARTHOG Instrucciones de uso

Manuales populares de Controladores de videojuegos de otras marcas

Wasp

Wasp SL-6610 Manual de usuario

JKG

JKG JKG2022A Manual de usuario

Marvo

Marvo MG08 Manual de usuario

Belkin

Belkin F8GBPC001 Manual de usuario

GameSir

GameSir Z2 Manual de usuario

Laser

Laser PCO-AGAMEC-BK Manual de usuario

Cortex

Cortex VEXnet Manual de usuario

Gioteck

Gioteck HF-1 Manual de usuario

Nacon

Nacon DAIJA ARCADE STICK Manual de usuario

SHAKS

SHAKS S1+ Manual de usuario

YCCTEAM

YCCTEAM Joy Con Manual de usuario

Hyperkin

Hyperkin Smartboy Manual de usuario

Nerf

Nerf DuraGrip Manual de usuario

MoveMaster

MoveMaster MoveMaster Manual de usuario

WinWing

WinWing Super Libra J1 Manual de usuario

ECCI

ECCI Trackstar 6000 Series Manual de usuario

Logitech

Logitech 963291-0403 - Attack 3 Joystick Manual de usuario

Pelican

Pelican Afterglow PL-678 Manual de usuario