THOR H-DVB-S2X-MOD Manual de usuario

H-DVB-S2X-MOD

DVBS2X Satellite Modulator

Revision 2018

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

Table of Contents

CHAPTER 1.................................................................................................................................................4

1.1 OVERVIEW....................................................................................................................................................4

1.2 FEATURES....................................................................................................................................................4

1.3 PRINCIPLE CHART .....................................................................................................................................4

1.4 SPECIFICATIONS........................................................................................................................................5

1.5 APPEARANCE AND DESCRIPTION..............................................................................................................6

CHAPTER 2 INSTALLATION GUIDE...................................................................................................................8

2.1WHAT’S IN THE BOX.....................................................................................................................................8

2.2 INSTALLATION PREP.....................................................................................................................................8

2.2.1 Device's Installation Flow Chart Illustrated as following

：

....................................................................................... 8

2.2.2 RackRoom & Headend Install...................................................................................................................................... 8

2.2.3 Grounding Requirement................................................................................................................................................ 9

2.3 POWER AND GROUND................................................................................................................................10

2.4 SIGNAL CABLE CONNECTION.....................................................................................................................10

2.4.1 ASI input and loop-out cable............................................................................................................................................ 10

2.4.2 RF output interface connection........................................................................................................................................ 10

.................................................................................................................................................................................................. 10

CHAPTER 3 OPERATION........................................................................................................................11

3.1 MAIN INTERFACE ............................................................................................................................................11

3.2 MENU TREE ...................................................................................................................................................11

CHAPTER 4 WEB-BASED NMS MANAGEMENT.................................................................................23

4.1 LOGIN.........................................................................................................................................................23

..........................................................................................................................................................................23

4.2 OPERATION................................................................................................................................................24

CHAPTER 5 TROUBLESHOOTING .......................................................................................................28

WARRANTY...............................................................................................................................................29

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

A Note from Thor Broadcast about this Manual

Intended Audience

This user manual has been written to help people who have to use, integrate and to

install the product. Some chapters require some prerequisite knowledge in electronics

and especially in broadcast technologies and standards.

Disclaimer

No part of this document may be reproduced in any form without the written

permission of Thor Broadcast.

The contents of this document are subject to revision without notice due to continued

progress in methodology, design and manufacturing. Thor shall have no liability for

any error or damage of any kind resulting from the use of this document.

Copy Warning

This document includes some confidential information. Its usage is limited to the

owners of the product that it is relevant to. It cannot be copied, modified, or translated

in another language without prior written authorization from Thor Broadcast.

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

Chapter 1

1.1 Overview

Thor Broadcast’s standalone modulator that has been made to abide by DVB-S2X standards

(EN302 307-2) which is a third generation broadband satellite telecommunication standard that

integratesASI and IP inputs and modulate them into a DVB-S/S2/S2X IF output.

This 1-U IP input Chassis supports BISS scrambling for easy signal distribution. It also comes

standard with 4 ASI inputs (3ASI are backups) and a 100mb. The S2X modulator can come with

CID, this is optional, and must be ordered as such.

This Modulator is the newest S2X standard used in a wide variety of application like broadcasting,

news services, broadband satellite applications. Fully compliantwith DVB-S (EN300 421), DVB-S2

(EN302 307-1) and DVB-S2X (EN 302307-2) standards.

1.2 Features

Fully compliant with DVB-S (EN300 421), DVB-S2 (EN302 307) and DVB-S2X (EN 302 307-2) standards

4 ASI inputs supporting backups (3 for backup)

IP (100M) signal input

QPSK, 8PSK, 8APSK, 16APSK, 32APSK Constellations

RF CID setting (Optional Setting, must be ordered)

Constant temperature crystal oscillator, as high as 0.1ppm stability

Support coupling 10Mhz clock output through RF output port

Support BISS scrambling

Support local and remote control with Web-server NMS

Output frequency range: 50~960MHz, 1KHz step

1.3 Principle Chart

ASI 1 Input

IP Input (100M Port) DVB-S/S2/S2X RF Output

10Mhz Input

ASI or IP input

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

1.4 Specifications

ASI Input

Supporting both188 Byte Packet TS Input

4 ASI Inputs ( 3 ASI for backup)

Connector: BNC, Impedance 75Ω

IP Input

1*IP Input (RJ45, 100M TS Over UDP)

10MHz Input

1*10MHz Input (BNC Interface)

IF Output

Range:50 ~ 960 MHz, 1KHz step

Output Level Attenuation: -28.5dBm~+3 dBm, 0.5dB Step

MER≥40dB

Connector: N type, impedance 50Ω

Channel

Coding

and

Modulation

Standard

DVB-S

DVB-S2

DVB-S2X

Outer coding

RS Coding

BCH Coding

Inner coding

Convolution

LDPC Coding

Constellation

QPSK

QPSK,8PSK,

16APSK,32APSK

QPSK,8PSK,

8APSK, 16APSK, 32APSK

FEC/

Convolution

Rate

1/2, 2/3, 3/4,

5/6, 7/8

QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,

5/6, 8/9, 9/10

8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,

9/10

16APSK: 2/3, 3/4, 4/5, 5/6, 8/9,

9/10

32APSK: 3/4, 4/5, 5/6, 8/9, 9/10

QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,

5/6, 8/9, 9/10, 13/45, 9/20,

11/20

8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,

9/10, 23/36, 25/36, 13/18

8APSK: 5/9-L, 26/45-L

16APSK: 2/3, 3/4, 4/5, 5/6, 8/9,

9/10,1/2-L,8/15-L, 5/9-L, 26/45,

3/5, 3/5-L, 28/45, 23/36 , 2/3-L,

25/36, 13/18, 7/9, 77/90

32APSK: 3/4, 4/5, 5/6, 8/9,

9/10, 2/3-L, 32/45, 11/15, 7/9

Roll-off Factor

0.2,0.25,0.35

0.2, 0.25, 0.35

0.05, 0.10, 0.15, 0.2, 0.25, 0.35

Symbol Rate

0.05~45Msps

0.05~40Msps (32APSK);

0.05~45Msps

(16APSK/8PSK/QPSK)

0.05~40Msps(32APSK,32APSK-L

);

0.05~45 Mbps

(16APSK/8PSK/QPSK/16APSK-L/

8APSK-L)

BISS Scramble

Mode 0, Mode 1, Mode E

System

Web-server NMS

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

Language: English

Ethernet software upgrade

Miscellaneou

Dimension

482mm×410mm×44mm

Temperature

0~45℃(operation), -20~80℃(storage)

Power

100-240VAC±10%,50Hz-60Hz

1.5 Appearance and Description

Front Panel Illustration

1 2 3 4 5 6

LCD Screen

Indicators

Power: indicates power connection

Alarm: indicates errors

Ext 10M: indicates 10MHz outer reference clock is applied

TS Overflow: indicates the input TS bit rate is over the bandwidth of

transmission limit

DVB-S: Current Modulation is DVB-S

DVB-S2: Current Modulation is DVB-S2

ASI1-4: indicates the corresponding ASI input is chosen to modulate

Up/Down/Left /Right key

Enter: Confirmation key

Menu key: Step-back key

Locking key

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

Rear Panel Illustration

1 2 3 4 5 6 7

ASI Input ports (3 ports for backup)

External 10Mhz Reference Clock Input and loop through

Data Port

Network Interface (NMS Management Port)

IF Output

Power Socket

Grounding screw

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

Chapter 2 Installation Guide

2.1 What’s in the Box

Thor DVB-S2X Satellite Modulator

User’s Manual

ASI Cable

Power Cord

If any item is missing or mismatching with the list above, please contact Thor 1-800-521-8467.

2.2 Installation Prep

When you install the DVB-S2X Modulator, please follow the steps below. Check the device for

missing or damage during transport

Preparing relevant environment for installation (rack room or Headend)

Install Modulator

Connect signal cables

Connecting communication port (if it is necessary)

2.2.1 Device's Installation Flow Chart Illustrated as following：

Connecting

Ground

Wire and

Power

Cord

Acquisition

Check Install

Device Setting

Parameter Running

Device

Connecting

Signal Wire

2.2.2 RackRoom & Headend Install

Item

Requirement

Machine Hall Space

When installing unit on rack, the distance between 2 rows of

machine frames should be 1.2~1.5m and the distance against

wall should be no less than 0.8m.

Machine Hall Floor

Electric Isolation, Dust Free, HVAC

anti-static material:1X107~1X1010, Grounding current

limiting resistance: 1M(Floor bearing should be greater

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

than 450Kg/㎡)

Environment

Temperature

5~40℃(sustainable)，0~45℃(short time)

installing air-conditioning is recommended

Relative Humidity

20%~80% sustainable 10%~90% short time

Pressure

86~105KPa

Door & Window

Installing rubber strip for sealing door-gaps and dual

level glasses for window

Fire Protection

Fire alarm system and extinguisher

Power

Device power, HVAC and lighting should be independent to

each other. Device power requires AC 110V±10%, 50/60Hz

or AC 220V±10%, 50/60Hz. Please carefully check before

running.

2.2.3 Grounding Requirement

Must be operated and maintained in an area free of dust and debris.

The cover should be securely fastened, do not open the cover of the chassis when the power is on. This

will also void Thor’s manufacturer’s warranty.

After installation, securely stow away all loose cables, external antenna, and others.

Be careful when connecting a power source to the device.

Do not operate in wet or damp areas. Make sure the extension cable is in good condition

Make sure the power switch is off before you start to install the device

It is important to keep this device grounded to ensure all of the modules function correctly. Correctly

grounding the device will also help prevent any electrical interference, lightening. Etc.Also it helps

reject minor interference that may disrupt the devices ability to function smoothly. General rule of

them, make sure the device is grounded when installing anywhere.

Always use copper wire. When applied correctly the ground must be wrapped well to ensure

maximum conduction so it can reduce any high frequencies. The copper ground wire should also be

as short and thick as possible

Installer must make sure that the two ends of the ground are well conducted and have appropriate

anti-rust properties.

H-DVB-S2X-MOD

Thor Fiber 2018 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com

It is prohibited to use any other device as part of the grounding electric circuit.

The area of the conduction between the ground wire and device’s frame should be no less than 25 ㎡.

2.3 Power and Ground

Connect Power Cord

Insert one end into power supply socket, while inserting the other end to AC power.

Connect Grounding Wire

When the device solely connects to protective ground, it should not share the same ground

with any other devices. If the device shares grounding, the resistance should be smaller than

1Ω.

Caution:

Before connecting power cord to the DVB-S2X Mod, you should set the power switch to

“OFF”.

2.4 Signal Cable Connection

The signal connections include the connection of input signal cable and the connection of output

signal cable.

2.4.1 ASI input and loop-out cable

2.4.2 RF output interface connection

Tabla de contenidos

Otros manuales de Receptor de THOR

THOR

THOR F-RF-RX Series Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario