3
1. IMPORTANT INFORMATION
1.1 Safety Information
Thank you for purchasing the Think Gizmos Colour Changing Humidier. Please read
through this instruction manual before use as it contains all the information you need about
how to correctly enjoy this product.
CAUTION
ELECTRONIC PRODUCT
Do not leave children unattended with this product. Not suitable for children under the age
of 3 Years.
This product should be used in accordance with this user manual in a safe way to avoid
electric shock or injuries.
ADULT SUPERVISION REQUIRED
WARNING! Do not try to modify this product in any way as this may invalidate your
warranty.
WARNING! Contains small parts, child supervision is required at all times.
DO NOT immerse the Colour Changing Humidier in water, it is an electrical product and
will get damaged.
AVOID exposing to excess heat or leave out in direct sunlight.
• Use the supplied power cord, Type C, 1A. If you use an alternative power cord, you must
pay attention to make sure the current specication is 1A, otherwise it will aect the
atomization eect or even damage the device.
• Pay attention to the power adaptor being used, its output cannot be lower than DC5/1A,
otherwise it will aect the atomization eect.
• Remove the shell and lid of the water tank before relling with water.
• Rell the water tank at the designated water rell place. The water amount should not
exceed the maximum water level.
• The maximum water volume is 180ml, do not exceed this amount or it can cause the
water to leak, damage to the humidier or the atomization eect to not work correctly.
• Use pure water, to avoid damage to the atomizer due to impurities in the water and to
give the best performance.
• Water temperature must be lower than 60°C (140°F).
• After use: Pour out the remaining unused water in the tank to keep the water fresh and
stop the atomizer from sitting in water when not in use.
• When cleaning the humidier wipe the inside of the case with a dry thin cloth and
wipe o any dirt from the atomizer carefully with a cotton swab. Ensure humidier is
unplugged before cleaning the device.
• DO NOT move the humidier when it is being used. Turn o and remove the USB Cable
before moving.
• Remove the Outer Shell of the humidier when moving so you can view the water level
and reduce the chance of spillage.
