Thermo Scientific Evolution 300 Manual de usuario
Evolution 300 and Evolution 600
Mercury Lamp Accessory
User’s Guide
The information in this publication is provided for reference only. All information
contained in this publication is believed to be correct and complete. Thermo Fisher
Scientific shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance or use of this material. All
product specifications, as well as the information contained in this publication, are subject
to change without notice.
This publication may contain or reference information and products protected by
copyrights or patents and does not convey any license under our patent rights, nor the
rights of others. We do not assume any liability arising out of any infringements of patents
or other rights of third parties.
We make no warranty of any kind with regard to this material, including but not limited
to the implied warranties of merchantability and fitness for a particular purpose.
Customers are ultimately responsible for validation of their systems.
© 2005-2007 Thermo Fisher Scientific Inc. All rights reserved. No part of this publication
may be stored in a retrieval system, transmitted, or reproduced in any way, including but
not limited to photocopy, photograph, magnetic or other record, without our prior written
permission.
For technical assistance, please contact:
Technical Support
Thermo Fisher Scientific
5225 Verona Road
Madison, WI 53711-4495
U.S.A.
Telephone: 1 800 532 4752 (U.S.A.) or +1 608 273 5017 (worldwide)
Fax: +1 608 273 5045 (worldwide)
World Wide Web: http://www.thermo.com/spectroscopy
Microsoft, Windows and Windows NT are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries. All other trademarks
are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
269-165800, Rev. B
Contents
Introduction.........................................................................................1
Conventions used in this manual .............................................................. 1
Questions or concerns............................................................................... 2
Getting Started .....................................................................................3
Installing the mercury lamp ...................................................................... 3
Evolution 300 ........................................................................................... 4
Evolution 600 ........................................................................................... 6
Using the Mercury Lamp......................................................................8
Local Control............................................................................................ 8
Instrument verification .......................................................................... 9
Wavelength calibration ........................................................................ 10
VISION.................................................................................................. 10
Wavelength Accuracy test .................................................................... 10
Wavelength Calibration ....................................................................... 12
Mercury lamp status ............................................................................ 13
Maintenance.......................................................................................15
Routine maintenance .............................................................................. 15
Thermo Fisher Scientific Evolution 300 and Evolution 600 Mercury Lamp Accessory User’s Guide i
Introduction
The Mercury Lamp is a dedicated accessory for the Evolution™ 300 and
Evolution 600 spectrophotometers. It is designed to enable the user to
verify that the wavelength calibration and bandwidth accuracy of the
instrument conform to the specification and to perform wavelength
recalibration if required.
Conventions used in this manual
This manual includes safety precautions and other important information
presented in the following format:
Note Notes contain helpful supplementary information.
Notice Follow instructions labeled “Notice” to avoid damaging the system
hardware or losing data.
Caution Indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury.
Warning Indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
Danger Indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
Thermo Fisher Scientific Evolution 300 and Evolution 600 Mercury Lamp Accessory User’s Guide 1
The following safety symbols are used on this product:
Symbol Description Indication
Black graphical
symbol inside a
yellow triangle with a
black triangular band
This is a warning symbol. The graphic in
this symbol is used to alert the user to
potential hazards.
Black graphical
symbol inside a red
circular band with a
red diagonal bar
This is a prohibition symbol. The graphic in
this symbol is used to alert the user to
actions that shall not be taken or shall be
stopped.
White graphical
symbol inside a blue
circle
This is a mandatory action symbol. It is
used to indicate that an action shall be
taken to avoid a hazard.
Black graphical
symbol inside a
yellow triangle with a
black triangular band
This is the general warning sign. Failure to
heed the safety precautions could result
in personal injury.
White graphical
symbol inside a blue
circle
This is the general data loss or property
damage symbol and is not related to
personal injury. Failure to heed these
precautions can result in irreparable
damage to property or permanent data
loss.
Questions or concerns
In case of emergency, follow the procedures established by your facility. If
you have questions or concerns about safety or need assistance with
operation, repairs or replacement parts, you can contact our sales or service
representative in your area or use the information at the beginning of this
document to contact us.
2 Evolution 300 and Evolution 600 Mercury Lamp Accessory User’s Guide Thermo Fisher Scientific
Getting Started
This chapter provides important information about installing your
accessory.
Installing the mercury lamp
This accessory consists of a mercury discharge lamp mounted in a
dedicated unit.
Warning Before installing the mercury lamp, turn off the power to the
spectrophotometer and disconnect the spectrophotometer power cord from
the wall outlet or power strip to avoid exposure to hazardous UV
radiation.
Warning Never look directly at the light beam or at its bright reflection. Always wear
protective glasses that will absorb UV radiation.
1. Turn off the instrument and disconnect the spectrophotometer
power cord from the wall outlet.
2. Remove the access port cover.
The mercury lamp access port is located at the rear of the instrument to
the right of the sample compartment.
Remove the access port cover by rotating the quarter turn fastener
counterclockwise using a straight bladed screwdriver, or the edge of a
suitable coin.
Thermo Fisher Scientific Evolution 300 and Evolution 600 Mercury Lamp Accessory User’s Guide 3
Note This will not be needed when the mercury lamp is in place but should be
stored in a safe location so it can be reinstalled if the mercury lamp is later
removed.
2. Plug the mercury lamp into the socket.
The mercury lamp occupies the socket, which is exposed by removing
the blanking plate.
Align the locating pins with the holes in the base of the mercury lamp
and ensure that the lamp base is located securely against the spring
loaded toggle.
Alignment
pin
Alignment
pin
Mercury lamp
Socket
Spring loaded toggle
Notice Do not touch the lamp envelope. Any fingerprints will damage the quartz
window of the lamp module.
The lamp assembly should now be correctly positioned adjacent the
window in the optics compartment cover.
Thermo Fisher Scientific Evolution 300 and Evolution 600 Mercury Lamp Accessory User’s Guide 5
3. Replace the cover on the mercury lamp access port.
4. Reconnect the AC power cord to the instrument.
5. Power up the instrument.
Wait for the instrument to initialize.
The accessory is now ready for use. It is controlled from the operating
software.
Reverse the order given in the preceding procedure to remove the mercury
lamp.
Evolution 600
Follow steps 1 and 2 above and then proceed as indicated below.
1. Plug input connector into the power supply.
Deuterium
lamp
Input
connector
Power supply
Output
CAUTION HOT SURFACE
ATTENTION SURFACE
CHAUDE
6 Evolution 300 and Evolution 600 Mercury Lamp Accessory User’s Guide Thermo Fisher Scientific
2. Slide power supply into position and align holes with screw heads.
3. Once in place, tighten thumbscrew.
4. With output cable going over the top of the input cable, align the
lamp housing with pin.
5. Secure the lamp.
To do this, tighten down the captive screw using fingers.
Reverse the order given in the preceding procedure when you remove the
mercury lamp.
Thermo Fisher Scientific Evolution 300 and Evolution 600 Mercury Lamp Accessory User’s Guide 7
Otros manuales para Evolution 300
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Instrumento de medición de Thermo Scientific
Thermo Scientific
Thermo Scientific RadEye G20-ER Manual de usuario
Thermo Scientific
Thermo Scientific RadEye GF Manual de usuario
Thermo Scientific
Thermo Scientific 1064Defender Manual de usuario
Thermo Scientific
Thermo Scientific appliedbiosystems SeqStudio Flex Series Manual de usuario
Thermo Scientific
Thermo Scientific 42i Manual de usuario
Thermo Scientific
Thermo Scientific 60i Manual de usuario
Thermo Scientific
Thermo Scientific 43i Manual de usuario
Thermo Scientific
Thermo Scientific Orion 350 Manual de usuario
Thermo Scientific
Thermo Scientific 42i Manual de usuario
Thermo Scientific
Thermo Scientific Orion Star A215 Manual de usuario
Thermo Scientific
Thermo Scientific 2210AM Manual de usuario
Thermo Scientific
Thermo Scientific Orion Star Manual de usuario
Thermo Scientific
Thermo Scientific NanoDrop 2000 Manual de usuario
Thermo Scientific
Thermo Scientific NITON XL3t 500 Manual de usuario
Thermo Scientific
Thermo Scientific 49iQ Manual de usuario
Thermo Scientific
Thermo Scientific ISQ 7000 Manual de usuario
Thermo Scientific
Thermo Scientific Orion Star A200 Series Manual técnico
Thermo Scientific
Thermo Scientific Orion Star A210 Series Manual de usuario
Thermo Scientific
Thermo Scientific Nicolet iS50 AEM Manual de usuario
Thermo Scientific
Thermo Scientific Orion Star Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario