Thermo Scientific Uniry Lab Services UP150 Manual de instrucciones
Operation
UP150 Controller
SEG Segment indicator operations in the Reset Standby Mode
UP150 Controller
Revision Date: June 30, 2017
UP150 SEG Operation in Reset Mode
2 of 2 www.unitylabservices.com/contactus
While the UP150 is in the Reset/Standby Mode with all indicators extinguished, the Segment
function can be viewed.
However, because the Controller is not running, the values will be Zeros (0 or 0.00).
There are no operational selections or changes made using this button sequence.
A single press of the SET/ENT button will illuminate the SEG indicator and make the lower
display show the Segment number 0.
Another press of the SET/ENT button will make the lower display show a Time value of 0.00.
Another press of the SET/ENT button will extinguish the SEG indicator and return the lower
display to the Local Setpoint being used in the Local Mode.
While in Reset Mode, press SET/ENT SEG indicator illuminates and the
Button segment number 0 is in Lower display
Another press of the SET/ENT button Another press of the SET/ENT button
shows a Time value of 0.00 extinguishes the SEG indicator
Tabla de contenidos
Otros manuales de Controladores de Thermo Scientific
Thermo Scientific
Thermo Scientific 3060 Instrucciones de funcionamiento
Thermo Scientific
Thermo Scientific TSB140R Manual
Thermo Scientific
Thermo Scientific Unity Lab Services UP150 Manual de instrucciones
Thermo Scientific
Thermo Scientific ALPHA PH 560 Manual de usuario
Thermo Scientific
Thermo Scientific Alpha pH 560 Manual de usuario
Thermo Scientific
Thermo Scientific 200L Manual de usuario
Thermo Scientific
Thermo Scientific ALPHA PH 560 Manual de usuario
Thermo Scientific
Thermo Scientific ALPHA COND 1000 Manual de usuario
Thermo Scientific
Thermo Scientific ALPHA COND 560 Manual de usuario
Thermo Scientific
Thermo Scientific Dionex RFC Manual de usuario
