Thermaltake Pacific Gaming RL240 D5 Manual de usuario

Before Installation

Cautions: Make sure there's enough space when you start set up the LCS product

To ensure a clean loop, flush and rinse your radiators

and water blocks with distilled water before using.

Make sure the fittings are screwed securely when

placing them onto the radiator.

Attach the fans to the radiator

Choose the proper way to mount the pump and reservoir

by referring to the manual (suggest vertical palcement) Attach fittings onto the pump and reservoir

Attach the fittings to the inlet and outlet of the

waterblock.

Attach the waterblock onto the motherboard by

referring to the enclosed manual.

Radiators Case Fan

Pump and Reservoir

Water Blocks

Installation Walkthrough (Example: Core V51)

Place the motherboard into the case. Position the radiator. Attach the pump and reservoir into

the chosen locations.

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !

Pacific Gaming RL240 D5 PETG LCS Kit

Cutting and Attaching the Tubing

Push the end of the tubing over the fitting ;

make sure the tubing is a tight fit. Slide the

cap over the fitting and rotate it clockwise

until the tubing is sealed in place.

Connect the tubing and check all the

fittings are sealed. The loop order:

Water Black > Radiator

Filling the System

Cautions:

1. Before filling the system, please make

sure that each fitting as well as unused

ports are completely sealed.

2. If there is any case of leaking,

immediately turn off the power and

clean the leak

3. If there's any related electronic parts

stained on liquid coolant, make sure to

completely clean and dry the

components. And then make sure they

all work well.

After switching off the power supply,

connect the PSU power cord and

product cables.

Use the refill bottle to fill coolant into the reservoir

Place your PSU outside of the case and attach it to

the pumps 4pin molex connector, turn on the power

of PSU and make the rest of the system fills up.

Thermaltake recommends the following steps to be taken after completing your water loop setup

1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance

while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.

2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.

3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately

4. Fill the reservoir to the top as it will prevent air from going into the pump

5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.

6. Place some paper towels under fittings and joining points to test for leaks.

7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.

www.thermaltake.com

Connect the tubing and check all the

fittings are sealed. The loop order:

Pump Outlet > Water Block

onnect the tubing and check all the

fittings are sealed. The loop order:

Radiator > Reservoir Inlet

Tabla de contenidos

Otros manuales de Hardware de computadora de Thermaltake

Thermaltake

Thermaltake Water 3.0 Riing RGB 360 Manual de usuario

Thermaltake

Thermaltake Divider 370 TG ARGB Manual de usuario

Thermaltake

Thermaltake Pacific Series Manual de usuario

Thermaltake

Thermaltake Pacific W5 Manual de usuario

Thermaltake

Thermaltake CLP0538 Manual de usuario

Thermaltake

Thermaltake M360 Plus Manual de usuario

Thermaltake

Thermaltake FANLESS VGA Manual de usuario

Thermaltake

Thermaltake CL-P0540 Manual de usuario

Thermaltake

Thermaltake UX100 Manual de usuario

Thermaltake

Thermaltake Pacific V-RTX 4090 Plus Manual de usuario

Thermaltake

Thermaltake TH120 ARGB Sync Manual de usuario

Thermaltake

Thermaltake Extreme Spirit Il Manual de usuario

Thermaltake

Thermaltake Pacific A2 Ultra Manual de usuario

Thermaltake

Thermaltake Pacific V-RX 5700 Plus Series Manual de usuario

Thermaltake

Thermaltake V3 Black Edition VL8000 Series Manual de usuario

Thermaltake

Thermaltake A1827 Manual de usuario

Thermaltake

Thermaltake Pacific V-RTX 4090 Plus Manual de usuario

Thermaltake

Thermaltake Water 3.0 Ultimate Manual de usuario

Thermaltake

Thermaltake TH360 ARGB Sync Manual de usuario

Thermaltake

Thermaltake Water 3.0 240 ARGB Sync Premium Edition... Manual de usuario

Thermaltake

Thermaltake Pacific PR12-D5 Plus Manual de usuario

Thermaltake

Thermaltake Floe Ultra 360 RGB Manual de usuario

Thermaltake

Thermaltake M900 XXL RGB Manual de usuario

Thermaltake

Thermaltake ARMOR A60 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario