Theben TR 030 top TERMINA Manual de usuario

TERMINA

1-channel 7 day timer

TR 030top

Safety

Information

According to version

preprogrammed with

the current time and

summer/ winter

norm time

The connection and installation of electrical

appliances must be performed by a skilled

electrician only. Any intervention into or

modifications to the appliance shall lead to

the lapse of all warranty rights. Comply with

your national regulations and all relevant

safety stipulations.

Auto

MENU +

-OK

1234567

LN 123

310 010

Teil 1 von 2

Display of special functions:

Permanent ON/OFF

Random program active

Holiday program active

Displayed only when summer/

winter time changeover is

activated

Summer time r

Winter time f

Current days of the week

1 = Monday, 2 = Tuesday, ...

The decision Yes confirms the

selection or programming

Decision No means continue

Overview per day of

the programmed

switching times

5 = Friday

Channel

statuses

Service voltage OK

Two flashing dots.

Power reserve

mode

Three flashing dots.

Selection

e.g.: Auto, Prog, ...

Pulse, Cycle

Abort input

•

DGB FNL I E P

First contact

Selection of the national language

Initial operation

In emergency situations only: Should you press RESET on the timer, all stored data will be deleted. However, the timer will then still display the lan-

guage last selected and the summer/ winter norm time changeover last selected. Press the Res key with and a pointed object for approx. 1 second.

The decision Yes,confirms the

selection or programming.

The decision No,means

continue.

According

to version According

to version

The timer is delivered in so-called sleep mode.

To activate without a service voltage:

Briefly press the Menu key.

Activate with mains voltage:

According to version the timeswitch is already

pre-programmed with the actual time, the week-

day, and the changeover setting for Summer /

Winter time, the actual time and status display

appears after selection of the National language.

If the timer is not pre-programmed:

First select your National language and then

enter the actual date and time.

For programming, viewing, amending or

deleting

First of all read the text display.

Menu selection:

Select by pressing the Prog key.

Confirm by pressing .

By pressing the key select the desired menu.

e.g. New, View, Amend or Delete.

Confirm your selection by pressing .

Set or change: by pressing or .

Store by presssing .

To display the switching times:

In the menu View, press the key several times.

Activate the clock,

select the national language

By pressing the or key select your

national language.

Store your selection by pressing the

key.

Set or amend by pressing the

or keys.

TR 030 0 xxx

Lithium,

ap. 3 years

power reserve

memory

locations

Degree of protection

II EN 60730-1 in

compliance with

IP 20 EN 60529

min. –10 °C

max. +35 °C

Type 1 BSTU of

EN 60730-1, -2-7

Application in usual

environment

8Store

Programming the switching time

Switching times for lighting systems, machines,

ventilation systems, alarm systems etc.

Formation of day groups

If the same switching times are active on sever-

al days of the week, they occupy just one

memory location. 42 memory locations are

available, e.g. Monday – Friday 7.30 hrs ON.

Group formation: In answer to the text que-

stion Copy, decide by pressing the key

that the day program should be copied to ano-

ther day of the week. The Mixed program-

ming of switching, pulse and cycle times is allo-

wed.

When programming an ON and OFF

switching time, e.g. 9 AM, a switch-

off at 9 AM always has priority.

Program review:

Following programming the timer

makes a program review back to

midnight and then sets the correct

switching status.

Example: Switching on the lighting of a sports

hall on Mon.,Tues.,Thurs., Fri. from 7.30h until 12h.

Programming example:

Select Prog by pressing the key.

Store your selection by pressing the key.

Select New by pressing the or .

Store your selection by pressing the key.

Select ON or OFF by pressing or .

Store your selection by pressing .

Set the hours and minutes by pressing the or

key.

Store selection by pressing .

To store one day of the week only:

Select weekday by pressing or .

Select store by pressing .

Store by pressing .

To copy to other days of the week:

Store copy by pressing .

Select weekday by pressing or .

Store by pressing .

To leave out a day of the week, skip by pressing

the key.

Finally select the store display by pressing .

Store your selection by pressing .

Permanent ON or OFF

random or holiday program

Activating the randomprogram:

Press button for approx. 2 Sec. Symbol zflashes

when the random program is effective.

Effect of the holiday program: The holi-

day program has the effect that the timer

does not switch on the connected consumer

unit between the programmed start and

finish (stipulation of year, month, day). Start

and finish of the program is always mid-

night on the day that is programmed.

Example: 25.3. national holiday.

Programming: start 25.3. finish 25.3.

If the holiday program is active, the holiday symbol

is displayed flashing on the automatic menu.

Random ON

Random OFF

Example:

Random start

19.30 h ON

Example:

Random finish

6.00 h OFF

Effect of the random program:

The random program causes the timer to

switch between programmed pairs of swit-

ches (ON and OFF). The random on an off

times range between approx. 10 mins. and

120 min. The random time always begins

with OFF.

Press the two

keys for

approx. 1 s.

Manual preselection:

Press keys simultaneously

Channel C1 switches alter-

nately ON or OFF.

Symbol appears.

Manual preselection is cor-

rected again by the stored

program.

Via the

automatic menu AUTO only

Press both keys

for

approx. 2 s.

Cancellation of manual preselection/ permanent

switching: Briefly press the keys shown above.

Read the text display first of all

In the menu Man, select by pressing the

or key the function manual, per-

manent, random or holiday.

Confirm your selection by pressing the

key.

To cancel a function:

Select the function clear.

Store your selection by pressing .

Permanent

●

Pulse program

e. g.: for breaktime signals, ventilation systems,

flushing systems, bell controls etc.

Effect of the pulse program:

The pulse time can be set within the range

1 to 59 seconds.

Symbol flashes as long as the pulse program is active.

Example:

Switch off at

17.30 h 15 s

Switch-off delay

Program:

7.00 until 17.30 h

and

pulse at 17.30 h

pulse ON, duration 15 s

Switch-on delay

Example:

Switch-on at 7.00 h 15 s

Program:

To switch on from

7.00 until 17.30 h

and

pulse, OFF at 7.00 h

pulse duration 15 s

Viewing the pulse times

Only possible in the menu PULSE.

Day group formation

If the same pulse switching times are effective on

several days of the week, they occupy one pulse

memory location only, e.g.: Mon., Tues., Wed., Fri.,

pulse time 7.30 h. 32 memory locations are available

for pulse programming.

Always read the text display first of

all. You will be provided with pro-

gramming help. Confirm your selec-

tion by pressing the key.

Cycle program

Cyclically recurring time

functions within the scope of a timer,

e.g.: slow flashing indicator, water treatment,

advertisement lighting

The symbol flashes when the cycle program

is active.

Effect of the cycle program:

The clocking and pause times can be set separa-

tely. The settable times are max. 99 minutes and

59 seconds.The cycle program has the effect that

between two programmed times, day of week

start and day of week finish, the cycle program

is active.The cycle program always begins with a

switch on.

16 memory locations are available to you.

Example cycle start:

Monday 7.30 h ON

Example cycle finish:

Friday 16.30 h OFF

Viewing the cycle times:

Possible in the menu Cycle only!

N.B.: If two cycle times are programmed in which the start and

finish times overlap, it is always the cycle time that starts first

that is executed.

Example: Cycle time 1, programmed from: Mo to Thu

Cycle time 2, programmed from: Tue to Fri

Only cycle time 1 is effective, cycle time 2 is not accepted.

duration

pause Select by pressing the key Cycle.

Store your selection by pressing the key.

Set cycle start by pressing the keys or .

Store your selection by pressing the key.

Set cycle duration (Min./sec.) by pressing the keys or .

Store your selection by pressing the key.

Set cycle pause (Min./sec.) by pressing the keys or .

Store your selection by pressing the key.

Set cycle finish by pressing the keys or .

Store your selection by pressing the key.

Brightness variations at

lighting installations may

arise in the cycling mode.

In this case actions to reduce

these effects have to be

taken (for example reduc-

tion of the load or extension

of the cycle time).

More than 5 switching ope-

rations per minute are not

admissible without additio-

nal EMC interference mea-

sures.

Setting/ correcting the date and time

summer/winter time

Automatic summer/winter time

correction

According to version the timer is pre-

programmed ex-works complete with

the change-over. Should you switch off

the automatic facility or wish to alter it,

first of all read the text display.

Select by pressing or .

Store by pressing .

Read the text display first of all.

Select by pressing the key

or key.

Store by pressing the key.

TIMEGUARD LTD, Victory Park, 400 Edgware Road, London NW2 6ND

Tel. 0208/4508944; Fax: 0208/4525143

PETER WARBURTON PTY. LTD., 64 Brittania Road, Castle Hill

NSW 2154, Australia, Tel.: (02) 9899 2908, Fax: (02) 9899 4486

Free Prog to select sum/win change-

over other than EUR-GB-USA.

Select sum/win, and after with

sum/win. Store with .

Select rule FREE – with buttons

or .

Input month and weeks for sum/win.

Store with .

E.g. Month = March

Week 4 = fourth week

Week 5 = last week in month

Note: In sum/win free Prog the time

change is set automatically at

sunday 2 AM.

Time change is not available.

Tabla de contenidos

Otros manuales de Termostato de Theben

Theben

Theben RAMSES 850 top3 OT Manual de usuario

Theben

Theben ramses 812 top Manual de usuario

Theben

Theben RAM 722 Manual de usuario

Theben

Theben Timeguard ProgramaStat TRT036 Guía del producto

Theben

Theben RAMSES 784 Manual de usuario

Theben

Theben VARIA Series Manual de usuario

Theben

Theben RAMSES BLE OT 8509150 Manual de usuario

Theben

Theben RAMSES 813 top Set 1 Manual de usuario

Theben

Theben RAMSES 811 top3 Manual de usuario

Theben

Theben RAMSES 812 BLE Manual de usuario

Theben

Theben RAMSES 813 top2 HF Manual de usuario

Theben

Theben RAMSES 818 top 6 A Manual de usuario

Theben

Theben RAMSES 784 HF Manual de usuario

Theben

Theben RAMSES 818 top Manual de usuario

Theben

Theben RAMSES 797 B Manual de usuario

Theben

Theben RAMSES 814 BLE UP Manual de usuario

Theben

Theben RAMSES 786-1 OpenTherm Manual de usuario

Theben

Theben RAMSES 366/1 top2 Manual de usuario

Theben

Theben RAMSES 366/1 top2 Manual de usuario

Theben

Theben RAMSES 831 top Manual de usuario

Theben

Theben RAMSES BLE OT Manual de usuario

Theben

Theben RAMSES 722 Manual de usuario

Theben

Theben TimeGuard TRT033 Manual de usuario

Theben

Theben ramses 721 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario