Theben LUXORliving Guía del usuario

2022-11-28

LUXORliving

System Manual

Version 6

LUXORliving system manual

Contents

1General 3

2System 4

3Installation 5

4Simple start-up in 6 steps 7

4.1 Start project 7

4.2 Create overview 7

4.3 Integrate devices 8

4.4 Define functions 8

4.5 Program functions 8

4.6 Prepare visualisation 9

5Start-up with LUXORplug 10

5.1 Establish a connection 10

5.2 Configuration with LUXORplug 13

5.3 LUXORliving RF 55

5.4 Programming with LUXORplug 60

6Operation with LUXORplay 66

6.1 Users and authorisations 66

6.2 Scenes 69

6.3 "Time switch" function 71

6.4 LUXORplay settings 78

7LUXORliving – the Theben Cloud 80

7.1 Add other users 84

7.2 Cloud access for an existing user 85

8Integration of personal assistants 87

8.1 LUXORliving and Amazon Alexa 87

8.2 LUXORliving and Google Home 89

8.3 LUXORliving and Home Connect Plus 91

8.4 LUXORliving and IFTTT 93

9Appendix 96

9.1 Debug mode 96

9.2 Device update 97

10 FAQs concerning the LUXORliving webpage 98

10.1 General information 98

10.2 Problem solving 101

11 Contact 104

General

LUXORliving system manual 3

1General

LUXORliving smart home control is based on a bus communication and includes control of

lighting, actuators and indoor climate. LUXORliving is taken into operation by using the free

LUXORplug programming tool.

(http://luxorliving.de/luxorplug/)

LUXORplug assigns all functions, which can also be changed later on.

Operation is done via permanently installed operating controls or by using the free LUXORplay

app, which can be installed on a smartphone or tablet.

For iOS - App Store 

For Android - Play Store 

When operating via app, the LUXORliving IP1 system control centre has to be connected

to your home network.

System

LUXORliving system manual 4

2System

•All components of LUXORliving communicate via a bus connection according to the KNX

standard (KNX S-mode).

•The connection to the home network is via the LUXORliving IP1 system control centre.

This allows operation via the LUXORplay app.

•The system can be equipped with a maximum of 64 LUXORliving devices, which

includes system devices, sensors and actuators.

System devices

-LUXORliving IP1 (system control centre),

-LUXORliving P640 (power supply)1

Sensors

-Weather station

-Room sensors

-Binary inputs

-Button interfaces

-iON tactile sensors

Actuators

-Switch actuators

-Dimming actuators

-Blind actuators

-Heating actuators

•For operation, conventional buttons are used. They are integrated into the system via

button interfaces/binary input. Control is always via button. Only for the "switch"

function you can chose between "button" and "motion detector" (switch).

Alternatively, operation can be carried out via the LUXORliving iON tactile sensors.

Also, the LUXORplay app (for iOS, Android, Windows-PC) can be used for operation.

1Only one system control centre and one power supply are allowed to be installed in one system.

Installation

LUXORliving system manual 5

3Installation

•The components of LUXORliving are intended for installation in a switch cabinet, in a

flush-mounted box, or for wall mounting.

•Communication is via a 2-wire bus, to which each device has to be connected. The bus

connection can be executed as a line, star or tree topology.

The various wireless actuators and sensors also allow wireless communication.

The bus connection can be executed as a line, star, tree, or bus topology.

A connection as a closed ring or meshed is not allowed and leads to functional problems

in programming and communication!

The following cable lengths have to be observed:

power supply – participant max. 350 m

participant – participant max. 700 m

total cable length max. 1,000 m

For the bus connection, a KNX-certified bus line (J-Y(St)Y 2 x 2 x 0.8 mm) has to be used.

For operation, conventional buttons are used. They are integrated into the system via

button interfaces/binary input. Control is always via button. Only for the "switch"

function you can chose between "button" and "motion detector" (switch). Alternatively,

operation can be carried out via the LUXORliving iON tactile sensors. Also, the LUXORplay

app (for iOS, Android, Windows-PC) can be used for operation.

Installation

LUXORliving system manual 6

Please note that outdoors, a bus line can pose an increased safety risk. As an alternative

in the outdoor area, normal motion detectors with relay contact can for instance be

integrated into the system via the LUXORliving B6 binary input. When using the

LUXORliving M140 weather station, installation location and cable routing should be

chosen in a way, so access to the bus line is difficult.

When using the modular LUXORliving M130/M100 weather sensors, the system's bus

line is not routed to the outside, which ensures increased safety.

Simple start-up in 6 steps

LUXORliving system manual 7

4Simple start-up in 6 steps

4.1 Start project

First, complete the formalities by entering all relevant product information, such as the

project name, builder, address and installer.

4.2 Create overview

Using drag & drop, you can add the rooms to the relevant floors and assign them individual

names.

Simple start-up in 6 steps

LUXORliving system manual 8

4.3 Integrate devices

Devices that have already been installed can be imported, identified and named

automatically. Or you can create the device list manually and offline.

4.4 Define functions

Use drag & drop to add functions to the devices in each room. This determines which

devices communicate with each other.

4.5 Program functions

These functions can be transferred at any time. The project planning does not have to be

completely finished to program the devices.

Simple start-up in 6 steps

LUXORliving system manual 9

4.6 Prepare visualisation

The project file is transmitted to the system control centre. The functions are then

extremely easy to operate and configure using the LUXORplay app.

Start-up with LUXORplug

LUXORliving system manual 10

5Start-up with LUXORplug

5.1 Establish a connection

LUXORliving is always put into operation by using the LUXORliving IP1 system control centre and

the LUXORplug software. The LUXORplug software can be downloaded for free at

https://www.theben.de/ (https://luxorliving.de/luxorplug/).

For operation, the LUXORplay app is used, which is also available as a free download for your

smartphone/tablet.

https://luxorliving.de/luxorplug/

System requirements for LUXORplug:

- Windows 7 to Windows 11

- 32 bit and 64 bit

https://itunes.apple.com/de/app/luxorplay/id1319899246?mt=8

https://play.google.com/store/apps/details?id=de.theben.LUXORplay&hl=de

https://luxorliving.de/luxorplay/

System requirements for LUXORplay:

- Windows 7 to Windows 11

- 32 bit and 64 bit

- Android from version 4.4,

- iOS from version 9.x

The connection between PC and LUXORliving IP1 system control centre can be established in

various ways. We recommend the connection via a router.

We recommend the connection via a router.

5.1.1 Option 1 – Connection via a router

Connect PC (WLAN or LAN) and LUXORliving IP1 system control centre (LAN) with the router

and switch on the power supply of the LUXORliving IP1 system control centre.

The LUXORliving IP1 system control centre is delivered with activated DHCP service and receives

its IP address automatically from the router. After start-up, the IP address is displayed in the

LUXORliving IP1 display. If the router does not support DHCP, the IP address of LUXORliving IP1

has to be assigned manually. Please find further information on this in the manual of the router.

In LUXORliving IP1, the IP address can be configured as follows:

Press the " " button and open the "IP Config" menu with the " " button.

Select the "DHCP" setting with the " " button.

Otros manuales para LUXORliving

Tabla de contenidos

Otros manuales de Automatización del hogar de Theben

Theben

Theben TIME GUARD Programstat TRT034 Guía del producto

Theben

Theben LUXORliving Manual de usuario

Theben

Theben Timeguard WFADAPM Manual

Theben

Theben S KNX 9070880 Manual de usuario

Manuales populares de Automatización del hogar de otras marcas

Truth Hardware

Truth Hardware Sentry II Manual de usuario

FIBARO

FIBARO FGWPA-111 Manual de usuario

Hezborg

Hezborg BGR8016B Manual de usuario

MYDLINK

MYDLINK Pro Series Manual de usuario

Panasonic

Panasonic KX-HNA101FX Manual de usuario

GamaBit

GamaBit Houseper Manual de usuario

nedis

nedis WIFILRF10C37 Manual de usuario

Veho

Veho TA45 Manual de usuario

Nexa

Nexa ZPR-111 Manual de usuario

Vimar

Vimar 00801 Manual de usuario

Leviton

Leviton 47604-F6 Manual de usuario

EVERSPRING

EVERSPRING AN180 Manual de usuario

Coltech

Coltech 18-1339 Manual de usuario

IDS

IDS NXT vegas Guía

Vimar

Vimar 03975 Manual de usuario

iNels

iNels RFIM-20B Manual de usuario

EVA Logik

EVA Logik ZW30 Manual de usuario

Leviton

Leviton ODCØP-S0W Manual de usuario