TFA AIRCO 2 NTROL COACH Manual de usuario

1716

AIRCO2NTROL COACH – CO2Monitor



AIRCO2NTROL COACH – CO2Monitor



Thank you for choosing this instrument from TFA.

1. Before you use this product

•Please make sure you read the instruction manual carefully.

This information will help you to familiarize yourself with your new device, to learn all of its functions

and parts, to find out important details about its first use and how to operate it and to get advice in the

event of a malfunction.

•Following and respecting the instructions in your manual will prevent damage to your instrument and

loss of your statutory rights arising from defects due to incorrect use.

•We shall not be liable for any damage occurring as a result of non following of these instructions.

Likewise, we take no responsibility for any incorrect readings or for any consequences resulting from

them.

•Please take particular note of the safety advice!

•Please keep this instruction manual safe for future reference.

2. Delivery contents

•CO

2Monitor

• USB cable

• Instruction manual

Diese Anleitung oder Auszüge daraus dürfen nur mit Zustimmung von TFA Dostmann veröffentlicht werden. Die techni-

schen Daten entsprechen dem Stand bei Drucklegung und können ohne vorherige Benachrichtigung geändert werden.

Die neuesten technischen Daten und Informationen zu Ihrem Produkt finden Sie auf unserer Homepage unter Eingabe der

Artikel-Nummer in das Suchfeld.

www.tfa-dostmann.de

E-Mail: [email protected]

TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim, Deutschland 12/20

TFA_No. 31.5009_Anleit_12_20 17.12.2020 18:22 Uhr Seite 9

1918

AIRCO2NTROL COACH – CO2Monitor



AIRCO2NTROL COACH – CO2Monitor



• The device and the USB cable must not come into contact with water or moisture. Only suitable for

indoor use.

• Do not use the device if the housing or the USB cable are damaged.

• Operate the device out of reach of persons (including children) who cannot fully appreciate the potential

risks of handling electrical equipment.

• Unplug the device if any fault occurs or if the device is not used for a long period of time.

• Route the USB cable lead so that it does not come into contact with sharp-edged or hot objects.

Important information on product safety!

• Do not expose the device to extreme temperatures, vibrations or shocks.

• To avoid damage to the electronics, do not remove the protective cover or insert sharp object through

the ventilation slots.

EMC/RFI

• Protect the unit from EMI (Electro Magnetic Interference) from induction heaters, microwave ovens and

Electro Static Discharge. Readings may be affected if the unit is operated within a radio frequency elec-

tromagnetic field strength of approximately 3 volts per meter. The performance of the instrument will not

be permanently affected.

3. Range of application and all the benefits of your new instrument at a glance

• For monitoring the CO2concentration in buildings, where people are present, eg: schools, offices, public

facilities

• Indication of actual CO2concentration and history value of the last 24 hours

• Multi-function display illumination in different colours

• Indication of time, temperature and humidity

• Micro USB port (5V) to power via PC or power adapter

4. For your safety

• This product is exclusively intended for the range of application described above. It should only be used

as described within these instructions.

• Unauthorized repairs, alterations or changes to the product are prohibited.

Caution!

Risk of electrocution!

• Connect the device via the USB cable only to a suitable USB power source such as a computer, USB

power adapter (DC 5V ≥300mA).

TFA_No. 31.5009_Anleit_12_20 17.12.2020 18:22 Uhr Seite 10

2120

AIRCO2NTROL COACH – CO2Monitor



AIRCO2NTROL COACH – CO2Monitor



• “Auto” is displayed shortly after a successful connection, then “- - - -"” The backlight turns on.

• The black bars disappear one by one.

• The device is ready for use.

• The actual measurements will appear on the display: CO2 concentration, temperature, humidity.

• The clock must be set to the current time in setting mode.

7. Settings

7.1 Selection of the multi-function display illumination

• The device has a multi-function display illumination in different colours. Depending on the setting, the

illumination colour is used to evaluate and interpret the current CO2measured values.

• You can select your respective setting by pressing the MODE button.

• Wait some seconds until the display returns to normal mode to confirm the setting.

• The following four settings are available:

7.1.1 „Auto” (default)

In this mode, the display colour changes automatically in smooth transitions between the 3 colour

shades, depending on the current reading of the CO2levels.

Green: Optimal air quality: The CO2concentration is below 800 ppm.

Yellow: Medium air quality: The CO2concentration is between 800 ppm and 1400 ppm.

Red: Poor air quality: The CO2concentration is over 1400 ppm.

5. Elements

5.1 Display (Fig. 1)

A 1: CO2indication

A 2: CO2history of the last 24 hours

A 3: Time

A 4: Temperature

A 5: Humidity

5.2 Buttons (Fig. 1)

B 1: MODE button

B 2: + button

5.3 Housing (Fig. 2+3)

C 1: Micro USB port

C 2: Mounting holes

6. Getting started

• Insert the supplied USB cable with the micro USB plug into the provided opening on the device. Connect

the device via the USB cable only to a suitable USB power source.

TFA_No. 31.5009_Anleit_12_20 17.12.2020 18:22 Uhr Seite 11

2322

AIRCO2NTROL COACH – CO2Monitor



AIRCO2NTROL COACH – CO2Monitor



7 = GREEN

• Confirm with the MODE button.

• “AL” appears and the default setting is 1400 ppm.

• Use the + button to set the desired alarm limit (400 to 3000 ppm) in increments of 100 for the “AL” mode

• Confirm with the MODE button.

• The time appears on the display. The hour digits flash.

• Press the + button to adjust the hours.

• Press the MODE button again and set minutes in the same way.

• Confirm with the MODE button.

• “ECO L” appears and the default setting is OFF. If the ECO LIGHT function is activated, the light is dimmed

between 22:00 and 6:00. Please set the actual time to use this function.

• Press the + button to activate (ON) or deactivate (OFF) the function.

• Confirm the setting with the MODE button to return to normal mode.

• The device will automatically quit the setting mode if no button is pressed for 20 seconds.

8. Display section HISTORY

• The graph shows the measured CO2 values of the last 24 hours clearly.

• The bar on the position “0 h” always corresponds to the current measured value of the CO2 level (the

bar is updated every 10 seconds, together with the measured value).

7.1.2 „AL”

In this mode, the red display illumination is activated as an optical signal in the event of an alarm

when the limit value (default> 1400 ppm) has been exceeded.

You can set the alarm limit value in setting mode.

7.1.3 „on"

In this mode, you can set the display illumination to a single colour.

Choose between 7 colours in setting mode.

7.1.4 „OFF”

The backlight is off in this mode.

7.2 Setting mode

• Press and hold the MODE button for 3 seconds. SEL COL appears and you can use the + button to select

the display illumination colour for the "on" mode.

1 = WHITE

2 = LIGHT BLUE

3 = DARK BLUE

4 = PURPLE

5 = RED

6 = YELLOW

TFA_No. 31.5009_Anleit_12_20 17.12.2020 18:22 Uhr Seite 12

2524

AIRCO2NTROL COACH – CO2Monitor



AIRCO2NTROL COACH – CO2Monitor



Incorrect indication ➜Restart the device

Display 9999 ➜System error

Restart the device

11. Waste disposal

This product has been manufactured using high-grade materials and components which can be recycled

and reused.

This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment

Directive (WEEE).

Please do not dispose of this product in ordinary household waste. As a consumer, you are

required to take end-of-life devices to a designated collection point for the disposal of electri-

cal and electronic equipment, in order to ensure environmentally-compatible disposal.

12. Specifications

Power consumption DC 5V, ≥300mA (USB)

USB cable included

• The bar “- 3” corresponds to the average of the CO2 levels of the last 3 hours.

• The bar “- 6” corresponds to the average value of the CO2 levels for the period between 3 to 6 hours.

• The bar “- 12” corresponds to the average value of the CO2 levels for the period between 6 to

12 hours.

• The bar “- 18” corresponds to the average value of the CO2 levels for the period between 12 to

18 hours.

• The bar “- 24” corresponds to the average value of the CO2 levels for the period between 18 to

24 hours.

• The average values of bars “- 3” to “- 24” are recalculated and updated every 10 minutes.

9. Care and maintenance

• Clean the device with a soft dry cloth. Do not use solvents or scouring agents. Protect it from moisture.

• Keep the device in a dry place.

10. Troubleshooting

Problem Solution

No display ➜Connect the device with the micro USB cable to a suitable power source

TFA_No. 31.5009_Anleit_12_20 17.12.2020 18:22 Uhr Seite 13

2726

AIRCO2NTROL COACH – CO2Monitor



AIRCO2NTROL COACH – CO2Monitor



Operating temperature 0 °C … 50 °C

Storage range -20 °C … 60 °C

Dimensions 105 x 32 x 55 mm

Weight 86 g (device only)

No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the

time of going to print and may change without prior notice. The latest technical data and information about this product

can be found in our homepage by simply entering the product number in the search box.

www.tfa-dostmann.de

E-Mail: [email protected]

TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim, Germany 12/20

CO2

Measuring range 0 …9999 ppm

Resolution 1 ppm

Accuracy ±7 % or ±100 ppm at 0…3000 ppm (whichever is greater)

±10 % at > 3000 ppm

Update interval 10 seconds

Warm-up time approx. 10 seconds

Method Non-Dispersive-Infrared Technology (NDIR)

Temperature

Measuring range 0 °C … 50 °C

Resolution 0.1°C

Accuracy ± 1.0°C

Humidity

Measuring range 1% to 95% rH

Resolution 1% RH

Accuracy ±3 % rH (at 35…75 % rH)

TFA_No. 31.5009_Anleit_12_20 17.12.2020 18:22 Uhr Seite 14

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de TFA

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario