III
■Warning item on Grounding
If the product has the GND terminal on the front or rear panel surface, be sure to
ground the product to safely use it.
■Warnings on Installation environment
●Operating temperature and humidity
Use the product within the operating temperature indicated in the “rating”
temperature column. If the product is used with the vents of the product
blocked or in high ambient temperatures, a fire may occur.
Use the product within the operating humidity indicated in the “rating”
humidity column. Watch out for condensation by a sharp humidity change
such as transfer to a room with a different humidity. Also, do not operate the
product with wet hands. Otherwise, an electric shock or fire may occur.
●Use in gas
Use in and around a place where an inflammable or explosive gas or steam is
generated or stored may result in an explosion and fire. Do not operate the
product in such an environment.
Also, use in and around a place where a corrosive gas is generated or
spreading causes a serious damage to the product. Do not operate the
product in such an environment.
●Installation place
Avoid installing the product on inclined places or on places subject to
vibration. Otherwise, the product may slip or fall down to cause damages or
injury accidents.
■Do not let foreign matter in
Do not insert metal and inflammable materials into the product from its vent and
spill water on it. Otherwise, electric shock or fire may occur.
■Warning item on abnormality while in use
In abnormal situations, such as “smoke”, “fire”, “abnormal smell” or “irregular
noise” occur from the product while in use, stop using the product, turn off the
switch, and remove the power cord plug from the outlet. After confirming that no
other devices catch fire, ask us or your local dealer.
