Texas Instruments LMX2485E-EVM Manual de usuario

SNAU114D–March 2006–Revised June 2016

Using the LMX2485E & LMX2487E Evaluation Board

User's Guide

SNAU114D–March 2006–Revised June 2016

Using the LMX2485E & LMX2487E Evaluation Board

The Texas Instruments LMX2485E-EVM/LMX2487E-EVM helps designers evaluate the operation and

performance of any of the devices in the LMX248x family. Although only two options are offered, the other

members in the family are all pinout compatible and program compatible to one of these existing board

option. They would be expected to have similar performance, just different in the maximum frequency of

operation.

Topic ........................................................................................................................... Page

1 Setup.................................................................................................................. 2

2 Schematic........................................................................................................... 7

3 Bill of Materials.................................................................................................... 8

4 PCB Layers Stackup........................................................................................... 10

5 PCB Layout ....................................................................................................... 11

6 Typical Phase Noise Performance Plots................................................................ 13

Setup

www.ti.com

2SNAU114D–March 2006–Revised June 2016

Submit Documentation Feedback

Using the LMX2485E & LMX2487E Evaluation Board

Table 1. Evaluation Device and Package Configurations

Device RF PLL Frequency Range Evaluation Vehicle

LMX2485E 50 to 3000 MHz LMX2485E EVAL

LMX2485 500 to 3000 MHz

LMX2486 1000 to 4500 MHz LMX2487E EVALLMX2487 1000 to 6000 MHz

LMX2487E 3000 to 7500 MHz

The EVM contains one Frequency Synthesizer (See Table 1).

Table 2. Evaluation Device and Package Configurations

Board Version Designator IC Package VCO Model VCO Frequency

Range

LMX2485E-EVM U1 LMX2485E QFN24 Crystek CVCO55CL 60-80 MHz

Crystem CVCO55BE-

1800-2200 1800-2200 MHz

LMX2487E-EVM U1 LMX2487E QFN24 Crystek CVCO44BH 4100-4300 MHz

Although the devices are very broadband, the VCO is ultimately what limits the frequency range of the

evaluation board. These VCOs were chosen primarily availability, standard footprint, and for lower risk of

being obsoleted.

WARNING! Due to availability issues, the LMX2485E-EVM has two different suppliers for VCO. Be

sure to check the VCO model number to know what VCO model you have!

1 Setup

Input/Output Connector Description.

Figure 1. Evaluation Board Setup

www.ti.com

Setup

SNAU114D–March 2006–Revised June 2016

Using the LMX2485E & LMX2487E Evaluation Board

VccVCO

Connect this to a 5 V Power supply.

OSCin

Connect this to a signal generator at +4 dBm. Default frequency is 50 MHz for the LMX2485E-EVM and

100 MHz for the LMX2487E-EVM.

RFout

Connect this to a spectrum analyzer. The board has DC blocking capacitors, so the signal is AC coupled.

uWire

Hook this to the programming interface.

1.1 Quick Start for EVM Communications

Codeloader is the software used to communicate with the EVM (Please download the latest version from

TI.com - http://www.ti.com/tool/codeloader). This EVM can be controlled through the uWire interface on

board. There are two options in communicating with the uWire interface from the computer.

Option 1

Figure 2. LPT Interface

Open Codeloader.exe →Click “Select Device” →Click “Port Setup” tab →Click “LPT” (in Communication

Mode).

Option 2

Figure 3. USB2ANY-uWire Adapter Board

Setup

www.ti.com

4SNAU114D–March 2006–Revised June 2016

Submit Documentation Feedback

Using the LMX2485E & LMX2487E Evaluation Board

The Adapter Board

Table 3 describes the pins configuration on the adapter board for each EVM board (See examples in the

table below).

Table 3. Adapter Board Jumper Configuration

EVM Jumper Bank Code Loader Configuration

A B C D E F G H

LMX2581 A4 B1 C2 E5 F1 G1 H1 BUFEN (pin 1), Trigger (pin 7)

LMX2541 A4 C3 E4 F1 G1 H1 CE (pin 1), Trigger (pin 10)

LMK0400x A0 C3 E5 F1 G1 H1 GOE (pin 7)

LMK01000 A0 C1 E5 F1 G1 H1 GOE (pin 7)

LMK030xx A0 C1 E5 F1 G1 H1 SYNC (pin 7)

LMK02000 A0 C1 E5 F1 G1 H1 SYNC (pin 7)

LMK0480x A0 B2 C3 E5 F0 G0 H1 Status_CLKin1 (pin 3)

LMK04816/

4906 A0 B2 C3 E5 F0 G0 H1 Status_CLKin1 (pin 3)

LMK01801 A0 B4 C5 E2 F0 G0 H1 Test (pin 3), SYNC0 (pin 10)

LMK0482x

(prelease) A0 B5 C3 D

2E4 F0 G0 H1 CLKin1_SEL (pin 6), Reset (pin 10)

LMX2531 A0 E5 F2 G1 H2 Trigger (pin 1)

LMX2485/7 A0 C1 E5 F2 G1 H0 ENOSC (pin 7), CE (pin 10)

LMK03200 A0 E5 F0 G0 H1 SYNC (pin 7)

LMK03806 A0 C1 E5 F0 G0 H1

LMK04100 A0 C1 E5 F1 G1 H1

Example adapter configuration (LMK01801).

Figure 4. Example Adapter Board Configuration

Open Codeloader.exe →Click “Select Device” →Click “Port Setup” Tab →Click “USB” (in

Communication Mode) *Remember to also make modifications in “Pin Configuration” Section according to

Table above .

*Remember to also make modifications in “Pin Configuration” Section according to Table above.

www.ti.com

Setup

SNAU114D–March 2006–Revised June 2016

Using the LMX2485E & LMX2487E Evaluation Board

1.2 Loop Filter Values

TI’s Clock Design Tool can be used to optimize PLL phase noise/jitter for given specifications. See

http://www.ti.com/tool/codeloader.

1.3 RF PLL Loop Filter

Table 4. RF PLL Loop Filter Parameters

LMX2485E LMX2487E

VCO Used Crystek CVCO55CL Crystek CVCO55BH

VCO Gain 8 MHz/V 100 MHz/V

VCO Input Capacitance 330 pF 10 pF

Nominal Output Frequency 60 to 80 MHz 4100 to 4300 MHz

Phase Margin 44º 50º

Loop Bandwidth 8.7 kHz 15 kHz

Reference Clock Frequency 50 MHz 100 MHz

Kφ(Charge Pump) 16X (1520 μA) 8X (760 μA)

Phase Detector Freq 2000 kHz 20000 kHz

PLL Supply 3.3 V from LDO 3.3 V from LDO

VCO Supply 5 V 5 V

C1 10 nF 5.6 nF

C2 680 nF 120 nF

C3 15 nF 220 pF

C4 1 nF 1 nF

R2 180 Ω270 Ω

R3 220 Ω1.2 kΩ

R4 3.3 k Ω1.2 kΩ

The RF PLL loop filter parameters above are specifically for the VCO listed. If other VCO are used

instead, the values for these parameters will change.

For detailed design and simulation, please check our PLLatinum Sim Tool.

Setup

www.ti.com

6SNAU114D–March 2006–Revised June 2016

Submit Documentation Feedback

Using the LMX2485E & LMX2487E Evaluation Board

1.4 Installing the EVM Software

Go to http://www.ti.com/tool/codeloader

Click on the download button to download the software.

Run the executable file.

Figure 5. Using the EVM Software

On the Port Setup tab, the user may select the type of communication port (USB or Parallel) that will be

used to program the device on the evaluation board. If parallel port is selected, the user should ensure

that the correct port address is entered.

Don’t forget to press <Ctrl>+L or do Keyboard Controls -> Load Device, to load the settings.

www.ti.com

Schematic

SNAU114D–March 2006–Revised June 2016

Using the LMX2485E & LMX2487E Evaluation Board

2 Schematic

Figure 6. LMX2485E/87E-EVM Schematic

View Section 3 Bill of Materials for actual component values.

Bill of Materials

www.ti.com

8SNAU114D–March 2006–Revised June 2016

Submit Documentation Feedback

Using the LMX2485E & LMX2487E Evaluation Board

3 Bill of Materials

Table 5. Bill of Materials

Item Designator Description Manufacturer Part Number Qty

1C18, C22, C24,

C26, C30, C31,

C35, C41 CAP, CERM, 100pF, 25V, +/-

10%, X7R, 0603 AVX 06033C101KAT2A 8

2C5, C10, C11,

C14, C16, C17,

C25, C28, C29,

C36

CAP, CERM, 0.1uF, 16V, +/-

10%, X7R, 0603 Kemet C0603C104K4RACTU 10

3C1, C2, C3, C7,

C8, C9, C37,

C40 CAP, CERM, 1uF, 16V, +/-10%,

X5R, 0603 Kemet C0603C105K4PACTU 8

4 C4, C19 CAP, CERM, 10uF, 10V, +/-

10%, X5R, 0805 Kemet C0805C106K8PACTU 2

5 D1 LED Lumex 1594540000 1

6 L1 FB, 120 ohm, 500mA, 0603 Murata BLM18AG121SN1D 1

7OSCin, RFout,

VccVCO Connector, SMT, End launch

SMA 50 ohm Emerson Network

Power 142-0701-851 3

8R3, R20, R21,

R23, R55 RES, 0 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW06030000Z0EA 5

9R1, R2, R4, R6,

R7, R9, R10,

R12, R56 RES, 10.0 ohm, 1%, 0.1W, 0603 Vishay-Dale CRCW060310R0FKEA 9

10 R27, R29, R31 RES, 18 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060318R0JNEA 3

11 R14 RES, 51 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060351R0JNEA 1

12 R24,C21 RES, 10k ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060310K0JNEA 2

13 R43 RES, 270 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW0603270RJNEA 1

14 R32, R34, R35,

R36, R39 RES, 15k ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060315K0JNEA 5

15 R33, R37, R42,

R47 RES, 27k ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060327K0JNEA 4

16 U3 Ultra Low Noise, 150mA Linear

Regulator for RF/Analog Circuits

Requires No Bypass Capacitor,

6-pin LLP Texas Instruments LP5900SDX-3.3 1

18 U5 Low Noise, RRO Op Amp with

CMOS Input Texas Instruments LM6211MF 1

18 U7 NFET Fairchild BSS138 1

19 uWire Header FCI 52601-G10-8LF 1

www.ti.com

Bill of Materials

SNAU114D–March 2006–Revised June 2016

Using the LMX2485E & LMX2487E Evaluation Board

Table 6. Additional LMX2485E-EVM Specific Components

Item Designator Description Manufacturer Part Number Qty

20 U1 LMX2485E Texas Instruments LMX2485E 1

21 U2 VCO Crystek CVCO55CL-0060-0110 1

22 R45 RES, 15k ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060315K0JNEA 1

23 R46 RES, 27k ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060327K0JNEA 1

24 R50 RES, 0 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW06030000Z0EA 1

25 C1_RF CAP, CERM, 0.01uF, 100V, +/-5%,

X7R, 0603 Kemet C0603C103J1RACTU 1

26 C2_RF CAP, CERM, 0.68uF, 10V, +/-10%,

X5R, 0603 Kemet C0603C684K8PAC 1

27 C3_RF CAP, CERM, 0.015uF, 100V, +/-

10%, X7R, 0603 Kemet C0603C153K1RACTU 1

28 C4_RF CAP, CERM, 1000pF, 50V, +/-5%,

C0G/NP0, 0603 Kemet C0603C102J5GAC 1

29 R2_RF RES, 180 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW0603180RJNEA 1

30 R3_RF RES, 220 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW0603220RJNEA 1

31 R4_RF RES, 3.3k ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW06033K30JNEA 1

Table 7. Additional LMX2487E-EVM Specific Componenents

Item Designator Description Manufacturer Part Number Qy

32 U1 LMX2487E Texas Instruments LMX2487E 1

33 U2 VCO Crystek CVCO55BH-4100-4300 1

35 C1_RF CAP, CERM, 5600pF, 100V,

+/-5%, X7R, 0603 AVX 06031C562JAT2A 1

36 C2_RF CAP, CERM, 0.12uF, 10V, +/-

10%, X5R, 0603 MuRata GRM188R61A124KA01D 1

37 C3_RF CAP, CERM, 220pF, 100V, +/-

10%, X7R, 0603 AVX 06031C221KAT2A 1

38 C4_RF CAP, CERM, 1000pF, 50V, +/-

5%, C0G/NP0, 0603 Kemet C0603C102J5GAC 1

39 R2_RF RES, 270 ohm, 5%, 0.1W,

0603 Vishay-Dale CRCW0603270RJNEA 1

40 R3_RF RES, 1.2k ohm, 5%, 0.1W,

0603 Vishay-Dale CRCW06031K20JNEA 1

41 R4_RF RES, 1.2k ohm, 5%, 0.1W,

0603 Vishay-Dale CRCW06031K20JNEA 1

FR-4 (Er = 4.8)

10 mil

Top Layer

RF Ground Plane]

FR4 (Er = 4.8)

23 mil

Power Plane #1

FR4

23 mil

Bottom Layer

62.2 mil thick

PCB Layers Stackup

www.ti.com

10 SNAU114D–March 2006–Revised June 2016

Submit Documentation Feedback

Using the LMX2485E & LMX2487E Evaluation Board

4 PCB Layers Stackup

6-layer PCB Stackup includes:

• Top Layer for high-priority high-frequency signals (2 oz)

• FR4 Dielectric, 10 mils

• RF Ground plane (1 oz)

• FR4, 23 mils

• Power plane #1 (1 oz)

• FR4, 23 mils

• Bottom Layer copper clad for thermal relief (2 oz)

Figure 7. PCB Layers

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Texas Instruments

Texas Instruments

Texas Instruments CC2511 Manual de usuario

Texas Instruments

Texas Instruments TMS320C6472 Manual de usuario

Texas Instruments

Texas Instruments DAC7562EVM Manual de usuario

Texas Instruments

Texas Instruments LM25088 Manual de usuario

Texas Instruments

Texas Instruments ADS8354EVM-PDK Manual de usuario

Texas Instruments

Texas Instruments TPS65291 EVM Manual de usuario

Texas Instruments

Texas Instruments LP8752 Q1 Series Manual de usuario

Texas Instruments

Texas Instruments LMK01000 Manual de usuario

Texas Instruments

Texas Instruments AMC1411 Manual de usuario

Texas Instruments

Texas Instruments INA241EVM Manual de usuario

Texas Instruments

Texas Instruments EZShunt INA780 Manual de usuario

Texas Instruments

Texas Instruments TCA39306 Manual de usuario

Texas Instruments

Texas Instruments TPS543320EVM Manual de usuario

Texas Instruments

Texas Instruments TPS25741EVM-802 Manual de usuario

Texas Instruments

Texas Instruments PCM4202EVM Manual de usuario

Texas Instruments

Texas Instruments Stellaris LM3S2965 Manual de usuario

Texas Instruments

Texas Instruments AN-2154 Manual de usuario

Texas Instruments

Texas Instruments DS90UB638-Q1 Manual de usuario

Texas Instruments

Texas Instruments SWRU294 Manual de usuario

Texas Instruments

Texas Instruments TMAG5123EVM Manual de usuario

Texas Instruments

Texas Instruments ADS5120EVM Manual de usuario

Texas Instruments

Texas Instruments SLAU039 Manual de usuario

Texas Instruments

Texas Instruments TUSB7320 Manual de usuario

Texas Instruments

Texas Instruments MSP432E411Y-BGAEVM Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario