Texas Instruments MSP-FET430 Manual de usuario

MSP-FET430 FLASH Emulation Tool (FET)

(For use with IAR Workbench Version 3.x)

User's Guide

October 2006 SLAU13

Mixed Signal Products

IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any

product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before

placing orders, that information being relied on is current and complete. All products are sold subject to the terms and

conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent

infringement, and limitation of liability.

TI warrants performance of its products to the specifications applicable at the time of sale in accordance with TI’s

standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support

this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by

government requirements.

Customers are responsible for their applications using TI components.

In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be

provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any

license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual

property right of TI covering or relating to any combination, machine, or process in which such products or services might

be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s

approval, license, warranty or endorsement thereof.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is

accompanied by all associated warranties, conditions, limitations and notices. Representation or reproduction of this

information with alteration voids all warranties provided for an associated TI product or service, is an unfair and deceptive

business practice, and TI is not responsible nor liable for any such use.

Resale of TI’s products or services with statements different from or beyond the parameters stated by TI for that product

or service voids all express and any implied warranties for the associated TI product or service, is an unfair and deceptive

business practice, and TI is not responsible nor liable for any such use.

Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www.ti.com/sc/docs/stdterms.htm

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

iii

EVALUATION BOARD/KIT IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR

EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use.

Persons handling the product(s) must have electronics training and observe good engineering practice standards. As

such, the goods being provided are not intended to be complete in terms of required design−, marketing−, and/or

manufacturing-related protective considerations, including product safety and environmental measures typically found in

end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall

within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS),

recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other

related directives.

Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/kit may be returned

within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE

WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED,

OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR

PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI

from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s

responsibility to take any and all appropriate precautions with regard to electrostatic discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE

OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not exclusive.

TI assumes no liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Please read the User’s Guide and, specifically, the Warnings and Restrictions notice in the User’s Guide prior to handling

the product. This notice contains important safety information about temperatures and voltages. For additional information

on TI’s environmental and/or safety programs, please contact the TI application engineer or visit www.ti.com/esh.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used.

FCC WARNING

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION

PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. It generates,

uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices

pursuant to part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency

interference. Operation of this equipment in other environments may cause interference with radio communications, in

which case the user at his own expense will be required to take whatever measures may be required to correct this

interference.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Preface

Read This First

About This Manual

This manual documents the Texas Instruments MSP-FET430 Flash

Emulation Tool (FET). The FET is the development tool for the MSP430

ultra low power microcontroller. Both available interfaces, the Parallel-Port-

Interface and the USB-Interface, are described here.

How to Use This Manual

Read and follow the Get Started Now! chapter. This chapter will enable you

to inventory your FET, and then it will instruct you to install the software

and hardware, and then run the demonstration programs. Once you’ve

been demonstrated how quick and easy it is to use the FET, we suggest

that you complete the reading of this manual.

This manual describes the set-up and operation of the FET, but does not

fully teach the MSP430 or the development software systems. For details

of these items, refer to the appropriate TI and IAR documents listed in

Chapter 1.12 Important MSP430 Documents on the CD-ROM and WEB.

This manual is applicable to the following tools (and devices):

MSP-FET430PIF (debug interface with parallel port connection, for all

MSP430 Flash based devices)

MSP-FET430UIF (debug interface with USB connection, for all MSP430

Flash based devices)

Below tools contain the parallel port debug interface (MSP-FET430PIF)

and the respective target-socket module:

MSP-FET430X110 (for the MSP430F11xIDW, MSP430F11x1AIDW, and

MSP430F11x2IDW devices)

MSP-FET430P120 (for the MSP430F12xIDW and MSP430F12x2IDW

devices)

MSP-FET430P140 (for the MSP430F13xIPM, MSP430F14xIPM,

MSP430F15xIPM, MSP430F16xIPM, and MSP430F161xIPM devices)

MSP-FET430P410 (for the MSP430F41xIPM devices)

MSP-FET430P430 (for the MSP430F43xIPN devices)

MSP-FET430P440 (for the MSP430F43xIPZ and MSP430F44xIPZ

devices)

The following tools contain the USB debug interface (MSP-FET430UIF)

and the respective target-socket module:

MSP-FET430U14 (for MSP430 devices in 14 pin PW-Packages)

MSP-FET430U28 (for MSP430 devices in 20 and 28 pin DW-Packages)

MSP-FET430U38 (for MSP430 devices in 38 pin DA-Packages)

MSP-FET430U40 (for MSP430F2330/F2350/F2370 devices in 40 pin RHA-

Packages only)

MSP-FET430U48 (for MSP430 devices in 48 pin DL-Package)

MSP-FET430U64 (for MSP430 devices in 64 pin PM-Package)

MSP-FET430U80 (for MSP430 devices in 80 pin PN-Package)

MSP-FET430U100 (for MSP430 devices in 100 pin PZ-Package)

This tool contains the most up-to-date materials available at the time of

packaging. For the latest materials (data sheets, User’s Guides, software,

application information, etc.), visit the TI MSP430 web site at

www.ti.com/msp430, or contact your local TI sales office.

Information About Cautions and Warnings

This book may contain cautions and warnings.

CAUTION

WARNIN

The information in a caution or a warning is provided for your protection.

Read each caution and warning carefully.

This is an example of a caution statement.

A caution statement describes a situation that could potentially

damage your software or equipment.

This is an example of a warning statement.

A warning statement describes a situation that could potentially

cause harm to you.

vii

Related Documentation From Texas Instruments

MSP430xxxx Device Data Sheets

MSP430x1xx Family User’s Guide, SLAU049

MSP430x2xx Family User’s Guide, SLAU144

MSP430x3xx Family User’s Guide, SLAU012

MSP430x4xx Family User’s Guide, SLAU056

If You Need Assistance

Support for the MSP430 device and the FET is provided by the Texas

Instruments Product Information Center (PIC). Contact information for the

PIC can be found on the TI web site at www.ti.com. Additional device-

specific information can be found on the MSP430 web site at

www.ti.com/msp430.

Note: Kickstart is supported by Texas Instruments

Although Kickstart is a product of IAR, Texas Instruments provides the

support for it. Therefore, please do not request support for Kickstart from

IAR. Please consult the extensive documentation provided with Kickstart

before requesting assistance.

FCC Warning

This equipment is intended for use in a laboratory test environment only. It

generates, uses, and can radiate radio frequency energy and has not been

tested for compliance with the limits of computing devices pursuant to

subpart J of part 15 of FCC rules, which are designed to provide

reasonable protection against radio frequency interference. Operation of

this equipment in other environments may cause interference with radio

communications, in which case the user at his own expense will be

required to take whatever measures may be required to correct this

interference.

viii

Contents

Read This First ................................................................................................................... v

About This Manual ....................................................................................................... v

How to Use This Manual .............................................................................................. v

Information About Cautions and Warnings.................................................................. vi

Related Documentation From Texas Instruments.......................................................vii

If You Need Assistance...............................................................................................vii

FCC Warning ..............................................................................................................vii

Contents............................................................................................................................. ix

Figures ............................................................................................................................... xi

Tables................................................................................................................................. xi

Get Started Now! .............................................................................................................1-1

1.1 Kit Contents, MSP-FET430X110.......................................................................1-2

1.2 Kit Contents, MSP-FET430PIF .........................................................................1-2

1.3 Kit Contents, MSP-FET430Pxx0 (‘P120, ‘P140, ‘P410, ‘P430, ‘P440)..............1-2

1.4 Kit Contents, MSP-FET430UIF .........................................................................1-3

1.5 Kit Contents, MSP-FET430Uxx (‘U14, ‘U28, ‘U38, ‘U40, ‘U48, ‘U64, ‘U80,

‘U100)................................................................................................................1-4

1.6 Software Installation ..........................................................................................1-5

1.7 Hardware Installation, MSP-FET430X110 ........................................................1-6

1.8 Hardware Installation, MSP-FET430PIF ...........................................................1-6

1.9 Hardware Installation, MSP-FET430UIF ...........................................................1-6

1.10 Hardware Installation, MSP-FET430Uxx (‘U14, ‘U28, ‘U38, ‘U40, ‘U48, ‘U64,

‘U80, ‘U100), MSP-FET430Pxx0 (‘P120, ‘P140, ‘P410, ‘P430, ‘P440) .............1-7

1.11 “Flash”ing the LED ............................................................................................1-7

1.12 Important MSP430 Documents on the CD-ROM and WEB ..............................1-8

Development Flow ..........................................................................................................2-1

2.1 Overview ...........................................................................................................2-2

2.2 Using Kickstart ..................................................................................................2-2

2.2.1 Project Settings ..................................................................................................2-3

2.2.2 Creating a Project from Scratch.........................................................................2-5

2.2.3 Using an Existing IAR V1.x/V2.x Project............................................................2-6

2.2.4 Stack Management and .xcl Files ......................................................................2-6

2.2.5 How to Generate Texas Instruments .TXT (and other format) Files..................2-7

2.2.6 Overview of Example Programs.........................................................................2-7

2.3 Using C-SPY .....................................................................................................2-8

2.3.1 Breakpoint Types ...............................................................................................2-8

2.3.2 Using Breakpoints ..............................................................................................2-9

2.3.3 Using Single Step.............................................................................................2-10

2.3.4 Using Watch Windows .....................................................................................2-11

Design Considerations for In-Circuit Programming ....................................................3-1

3.1 Signal Connections for In-System Programming and Debugging, MSP-

FET430PIF, MSP-FET430UIF, GANG430, PRGS430......................................3-2

3.2 External Power ..................................................................................................3-4

3.3 Bootstrap Loader...............................................................................................3-5

Frequently Asked Questions ........................................................................................ A-1

A.1 Hardware.......................................................................................................... A-2

A.2 Program Development (Assembler, C-Compiler, Linker) ................................. A-3

A.3 Debugging (C-SPY).......................................................................................... A-6

Hardware......................................................................................................................... B-1

FET Specific Menus ....................................................................................................... C-1

C.1 Menus............................................................................................................... C-2

C.1.1 EMULATOR--> DEVICE INFORMATION ......................................................... C-2

C.1.2 EMULATOR--> RELEASE JTAG ON GO......................................................... C-2

C.1.3 EMULATOR--> RESYNCHRONIZE JTAG ....................................................... C-2

C.1.4 EMULATOR--> INIT NEW DEVICE .................................................................. C-2

C.1.5 EMULATOR--> SECURE.................................................................................. C-3

C.1.6 EMULATOR--> SHOW USED BREAKPOINTS................................................ C-3

C.1.7 EMULATOR--> ADVANCED--> CLOCK CONTROL ........................................ C-3

C.1.8 EMULATOR--> ADVANCED--> EMULATION MODE ...................................... C-3

C.1.9 EMULATOR--> ADVANCED--> MEMORY DUMP ........................................... C-3

C.1.10 EMULATOR--> ADVANCED--> BREAKPOINT COMBINER ........................... C-3

C.1.11 EMULATOR--> STATE STORAGE CONTROL................................................ C-3

C.1.12 EMULATOR--> STATE STORAGE WINDOW.................................................. C-4

C.1.13 EMULATOR--> SEQUENCER CONTROL ....................................................... C-4

C.1.14 EMULATOR--> ”POWER ON” RESET ............................................................. C-4

C.1.15 EMULATOR--> GIE on/off ................................................................................ C-4

C.1.16 EMULATOR--> LEAVE TARGET RUNNING.................................................... C-4

C.1.17 EMULATOR--> FORCE SINGLE STEPPING................................................... C-4

C.1.18 EMULATOR--> SET VCC ................................................................................. C-4

80-pin MSP430F44x and MSP430F43x Device Emulation .......................................... D-1

MSP-FET430UIF Installation Guide .............................................................................. E-1

E.1 Hardware Installation........................................................................................ E-2

Otros manuales para MSP-FET430

Tabla de contenidos

Otros manuales de Microcontrolador de Texas Instruments

Texas Instruments

Texas Instruments LP-MSPM0L1306 Manual de usuario

Texas Instruments

Texas Instruments CC1110 Manual de usuario

Texas Instruments

Texas Instruments Serial Programming Adapter MSP430 Manual de usuario

Texas Instruments

Texas Instruments mmWaveICBoost Manual de usuario

Texas Instruments

Texas Instruments MSP430F663x Manual de usuario

Texas Instruments

Texas Instruments CC3235MODSF SimpleLink Manual de usuario

Texas Instruments

Texas Instruments C2000 LAUNCHXL-F280049C Manual de usuario

Texas Instruments

Texas Instruments SimpleLink CC2652RB Manual de usuario

Texas Instruments

Texas Instruments TMS320C67 DSP Series Manual de usuario

Texas Instruments

Texas Instruments OMAP-L138 DSP + ARM9 Manual de usuario

Texas Instruments

Texas Instruments TLC6C5712-Q1 Manual de usuario

Texas Instruments

Texas Instruments DS90UB913Q Manual de usuario

Texas Instruments

Texas Instruments MSP-WDS Metawatch Series Manual de usuario

Texas Instruments

Texas Instruments Stellaris LM3S9B96 Manual de usuario

Texas Instruments

Texas Instruments MSP430G2231 Manual de usuario

Texas Instruments

Texas Instruments TMS570 Manual de usuario

Texas Instruments

Texas Instruments LaunchPad CC2650 Manual de usuario

Texas Instruments

Texas Instruments Errata MSP430F6746 Manual de usuario

Texas Instruments

Texas Instruments MSP430F67471 Manual de usuario

Texas Instruments

Texas Instruments AFE79 Series Manual de usuario

Texas Instruments

Texas Instruments TMS320F28004 Series Manual de usuario

Texas Instruments

Texas Instruments CC3235 SimpleLink Series Manual de usuario

Texas Instruments

Texas Instruments CC2530 ZigBee Development Kit Manual de usuario

Texas Instruments

Texas Instruments Chipcon Products CC2400DK Manual de programación

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario

Silicon Laboratories

Silicon Laboratories C8051F800 Manual de usuario

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manual de usuario

Mikroe

Mikroe click Proximity 2 Manual de usuario