Texas Instruments TMS320C6670 Manual de usuario

Getting Started

The EVM ships with a Power On Self Test

(POST) flashed into I2C EEPROM. The POST

automatically executes when the board is

powered ON. POST performs memory test

and internal EMAC loopback test. At

power ON, the user LEDs are OFF by

default. The LEDs blink and turn OFF to

indicate successful DSP booting.

After booting, User LED-1 turns ON to

indicate successful RAM test and User

LED-2 turns ON to indicate successful

internal EMAC loop-back test. These LEDs

remain ON to indicate success of both

the tests.

Please refer to the EVM User Guide for

software installation and other details.

Important Notes when handling the

EVM

•Plug in all the cables before powering

ON the EVM to ensure proper grounding.

•Do not unnecessarily flex the boards,

while inserting cables. Excessive flexing

can break the PCB traces.

•Use proper ESD procedures when

handling the EVM.

•Warning: Some components on the EVM

may be too hot to touch with your bare

hand when power is on.

Online Documentation

•TMS320C6670 processor website

http://focus.ti.com/docs/prod/folders/pr

int/tms320c6670.html

•MCSDK website for updates

http://focus.ti.com/docs/toolsw/folders/

print/bioslinuxmcsdk.html

•CCS v5

http://processors.wiki.ti.com/index.php/

Category:Code_Composer _Stu dio_v5

This link contains

•Hardware & Software details

•User Guide

•Technical Reference Manual

•TMS320C6670 Datasheet

TI Worldwide Technical Support

Internet

TI Semiconductor Product Information Center Home Page

support.ti.com

TI Semiconductor KnowledgeBase Home page

support.ti.com/sc/knowledgebase

Product Information Centers

Americas

Phone +1(972) 644-5580 Fax +1(972)927-6377

Internet/Email support.ti.com/sc/pic/americas.htm

Europe, Middle East and Africa

Phone

European Free Call 00800-ASK-TEXAS

(00800 275 83927)

International +49 (0) 8161 80 2121

Russian Support +7 495 981 0701

Note: The European Free Call (Toll Free) number is not active in

all countries. If you have technical difficulty calling the free call

number, please use the international number above.

Fax +(49) (0) 8161 80 2045

Internet support.ti.com/sc/pic/euro.htm

Japan

Fax

International +81-3-3344-5317

Domestic 0120-81-0036

Internet/Email

International support.ti.com/sc/pic/japan.htm

Domestic www.tij.co.jp/pic

Asia

Phone

International +91-80-413816651-

Domestic Toll-Free-Number

Australia 800-999-084

China 800-820-8682

Hong Kong 800-96-5941

India 1-800-425-7888

Indonesia 001-803-8861-1006

Korea 080-551-2804

Fax +886-2-2378-6808

Email [email protected]

[email protected]

Internet support.ti.com/sc/pic/asia.htm

Important Notice: The products and services of Texas

Instruments Incorporated and its subsidiaries described herein

are sold subject to TI's standard terms and conditions of sale.

Customers are advised to obtain the most current and complete

information about TI products and services before placing

orders. TI assumes no liability for applications assistance,

customer's applications or product designs, software

performance, or infringement of patents. The publication of

information regarding any other company's products or services

does not constitute TI's approval, warranty or endorsement

thereof.

The floating bar is a trademark of Texas Instruments.

All other trademarks are the property of their respective owners

Toll-Free-Number

Malaysia 1-800-80-3973

New Zealand 0800-446-934

Philippines 1-800-765-7404

Singapore 800-886-1028

Taiwan 0800-006800

Thailand 001-800-886-0010

The TMDXEVM6670L (Evaluation Module) kit includes

• TMX320C6670 Evaluation Module

• Power adapter and power cord

• USB cable for on-board JTAG emulation (XDS100v1)

• Ethernet cable

• RS-232 serial cable

• Software (DVD) and documentation

Ensure EVM configuration switch

(SW3) are set as shown to run

Power On Self Test (POST)

1Connect the USB mini-B cable

to USB1 plug for on board

embedded emulation and

serial console port, as shown in

figure. (For use with CCS

debugger only)

Connect Ethernet switch /

Router / PC to the Giga Ethernet

port (LAN1) of EVM6678 board

using an Ethernet cable to

access EMAC0

3Connect the 12V DC power

adapter (supplied with the kit)

to power jack (DC_IN1)

4Load the DVD on your

computer and follow the

instructions provided in the

“Read_Me_First.txt” file

TMDXEVM6670L

TMX320C6670 Evaluation Module

DC 12V

DDR3 SDRAM

512 MB

60-pin header for

external emulator

On-Board RS-232

Serial Port

Warm Reset

AMC

Type B+

TMS320C6670

(4 core DSP)

NAND Flash

64 MB

Gigabit

Ethernet

Miscellaneous

I/O 80pin

connector

Full Reset

USB mini-B for XDS100

embedded emulator

Boot Mode /

Configuration

Setting

4 1 2

Otros manuales para TMS320C6670

Este manual sirve para los siguientes modelos

Otros manuales de Unidad de control de Texas Instruments

Texas Instruments

Texas Instruments TAS5514B Manual de usuario

Texas Instruments

Texas Instruments ADS1x7xEVM-PDK Manual de usuario

Texas Instruments

Texas Instruments bq20z65EVM-001 Manual de usuario

Texas Instruments

Texas Instruments bq35100 Manual del producto

Texas Instruments

Texas Instruments TPS1213Q1EVM Manual de usuario

Texas Instruments

Texas Instruments DRV2605LEVM-MD Manual de usuario

Texas Instruments

Texas Instruments DAC5674 EVM Manual de usuario

Texas Instruments

Texas Instruments TPS61177AEVM Manual de usuario

Texas Instruments

Texas Instruments TPS62866 Manual de usuario

Texas Instruments

Texas Instruments BQ25886 Manual de usuario

Texas Instruments

Texas Instruments TPA152 Manual de usuario

Texas Instruments

Texas Instruments TPS53119EVM-690 Manual de usuario

Texas Instruments

Texas Instruments LP-MSPM0C1104 Manual de usuario

Texas Instruments

Texas Instruments TLC6984 Manual de usuario

Texas Instruments

Texas Instruments TPS54233 Manual de usuario

Texas Instruments

Texas Instruments TPS1HA08x Manual de usuario

Texas Instruments

Texas Instruments TDC7200EVM Manual de usuario

Texas Instruments

Texas Instruments LM5170-Q1 EVM Manual de usuario

Texas Instruments

Texas Instruments TLV320AIC3109EVM-K Manual de usuario

Texas Instruments

Texas Instruments TPS2HCS10-Q1 Manual de usuario

Texas Instruments

Texas Instruments TI-Navigator Manual de usuario

Texas Instruments

Texas Instruments TWL6032 Manual de usuario

Texas Instruments

Texas Instruments TPS54521EVM-607 Manual de usuario

Texas Instruments

Texas Instruments DAC8811 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario