Texas Instruments TLC5540 Manual de usuario

TLC5540/TLC5510/TLC5510A

Evaluation Module

July 2002 Mixed-Signal Products

User’s Guide

SLAU007D

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

ordersandshouldverifythatsuchinformationiscurrentandcomplete.AllproductsaresoldsubjecttoTI’sterms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TIdoesnotwarrantorrepresentthatanylicense, eitherexpress orimplied, isgranted underanyTIpatentright,

inwhichTIproductsorservicesareused.InformationpublishedbyTIregardingthird–partyproductsorservices

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Information About Cautions and Warnings

iii

Read This First

Preface

Read This First

About This Manual

This user’s guide serves as a reference book for the TLC5540/

TLC5510/TLC5510A.Thisdocumentprovidesinformationtoassistmanagers

and hardware/software engineers in application development.

How to Use This Manual

This document contains the following chapters:

Chapter 1 Overview

Chapter 2 Circuit Description

Chapter 3 Physical Description

Information About Cautions and Warnings

This book may contain cautions and warnings.

This is an example of a caution statement.

A caution statement describes a situation that could potentially

damage your software or equipment.

This is an example of a warning statement.

A warning statement describes a situation that could potentially

cause harm to you.

The information in a caution or a warning is provided for your protection.

Please read each caution and warning carefully.

Related Documentation From Texas Instruments

ThefollowingdocumentsmaybeorderedbycontactingtheTexasInstruments

Product Information Center at one of the numbers listed on the next page, or,

they may be downloaded at:

http://www–s.ti.com/sc/docs/psheets/pids2.htm

TLC5510/TLC5510A Data Sheet (literature number SLAS095) contains

electrical specifications, available temperature options, general over-

view of the device, and application information.

TLC5540 Data Sheet (literature number SLAS105) contains electrical

specifications, available temperature options, general overview of the

device, and application information.

CE/FCC Warnings

Thisequipmentisintendedforuseinalaboratorytestenvironmentonly.Itgen-

erates,uses,andcanradiateradiofrequencyenergyandhasnotbeentested

for compliance with the limits of computing devices pursuant to subpart J of

part 15 of FCC rules. This device has been tested and found to comply with

the limits for a CISPRII Group 1 and the following directives: EMC Directive

89/336/EEC amending directive 92/31/EEC and 93/68/EEC as per

ENV50204:1995, EN55011: 1995 Class A, EN61000–4–4: 1995, and

EN6100–4–3: 1993. Operation of this equipment in other environments may

cause interference with radio communications, in which case the user at his

own expense will be required to take whatever measures may be required to

correct this interference.

Running Title—Attribute Reference

Chapter Title—Attribute Reference

Contents

1 Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Purpose 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Power Supply Requirements 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Circuit Description 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 EVM Analog Input 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.1 Direct Input 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.2 Amplifier Input, DC-Coupled 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.3 Amplifier Input, AC-Coupled 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.4 Input Bias Operational Range 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.5 Test Points 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.6 User Supplied Input Circuit 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Digital Output 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Clock Circuit 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4 Board Schematic 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Physical Description 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Board Layout 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Board Layers 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3 Part Descriptions 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Running Title—Attribute Reference

Figures

2–1 Board Schematic 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–1 EVM Board Layout 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–2 EVM Board Layer 1 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–3 EVM Board Layer 2 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–4 EVM Board Layer 3 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–5 EVM Board Layer 4 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tables

1–1 Power Supplies 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–1 Amplifier Input Coupling 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–2 Input Voltage Setting 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–3 Test Points 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–1 Part Descriptions 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

Overview

This chapter gives an overview of the TLC5540/TLC5510/TLC5510A

evaluation module (EVM).

Topic Page

1.1 Power Supply Requirements 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Power Supply Requirements 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

Purpose

1-2

1.1 Purpose

TheTLC5540/TLC5510/TLC5510Aevaluationmodule(EVM)providesaplat-

form for lab prototype evaluation of the Texas Instruments TLC5540/

TLC5510/TLC5510A 8-bit, high-speed analog-to-digital converters.

Since practical operation can be acheived with a clock speed in excess of

40 MHz, the circuit layout is critical and does not lend itself to classic

breadboarding techniques. In fact, proper operation requires use of surface-

mount components.

1.2 Power Supply Requirements

The TLC5540/TLC5510/TLC5510A EVM is designed to be powered by

regulated lab power supplies. Three lab supplies are required for the best

performance.

Table 1–1.Power Supplies

If Amp Used By-pass Amp

Connector Supply TLC5540/5510/

5510A TLC5510/

5540/5510A

J2 Positive analog supply 5 V ±10% 5 V ±10%

J3 Negative analog supply –5 V ±10% N/A

J8 Digital supply 5 V ±10% 5 V ±10%

The 5 V and –5 V analog supplies share an analog ground plane. The digital

supply uses an isolated ground plane.

The two ground planes can be easily connected by soldering jumpers from

E21 to E22 or from E13 to E14. This allows the user to adapt the EVM to

various grounding conditions that can exist in an evaluation circuit interface.

2-1

Circuit Description

This chapter describes the EVM circuit and its operation.

Topic Page

2.1 EVM Analog Input 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Digital Output 2–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Clock Circuit 2–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4 Board Schematic 2–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 2

EVM Analog Input

2-2

2.1 EVM Analog Input

The EVM analog input signal is applied to BNC connector J4 by one of four

methods:

Direct

Amplifier input (dc-coupled)

Amplifier input (ac-coupled)

User supplied input

2.1.1 Direct Input

To route the signal directly to the TLC5540/TLC5510/TLC5510A input, solder

jumpers from E7 to E8 and from E23 to E12. This provides a 50-Ωload (R5)

atinputconnectorJ4.Theinputsignalmustbedc-biasedtothespecifications

defined by the data sheet. The TLC5540/TLC5510/TLC5510A is connected

using its internal bias resistors. Jumper J6 bypasses one of the internal bias

resistorsandthusalterstheinputbiasrangerequiredbytheinputsignal. With

J6 installed, the voltage range of the TLC5540/TLC5510 is 0 V to 2.28 V (at

3.3 VDDA).

The TLC5510A uses only the center internal bias resistor with an externally-

applied regulated 4-V reference to generate the device reference voltage.

Hence the input signal range applied to J4 can be between 0 V–4 V.

The input signal is band-limited to 12 MHz by the LC filter consisting of FB5,

R15, and C5. For a bandwidth of 20 MHz, select a value for C5 in the 15 pF

to 33 pF range.

2.1.2 Amplifier Input, DC-Coupled

A THS3001 high-speed transconductance operational amplifier provides

buffering for dc-coupled amplifier-input signals. The amplifier circuit provides

a flat response to 300 MHz with a gain of two. It can drive a low impedance

load.

The values of R6 and R8 set the amplifier gain to two.

The gain can be reduced to one by removing R6. Since the inverting input is

a low-impedance current-controlled input, R8 must remain in the circuit, and

its value must be changed to 1 kΩ. This resistance value is critical because it

controls the high frequency response of the circuit. The TLC5510A amplifier

gain is set to one.

The output rolloff filter, consisting of R4 and C14, provides a small amount of

filtering against frequencies in excess of 20 MHz (fs/2). The value of C14 can

bealtered to change thefilter characteristics, or C14can be removed entirely.

Inmostcases,R4shouldbe retained to lowerthedirectcapacitiveloadonthe

operational amplifier, thereby avoiding high frequency peaking of the output

signal.

Resistor R7 also provides isolation against a direct capacitive load (such as

a scope probe) on the test point terminal.

Otros manuales para TLC5540

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Texas Instruments

Texas Instruments

Texas Instruments LM63635EVM Manual de usuario

Texas Instruments

Texas Instruments SN65HVD257 Manual de usuario

Texas Instruments

Texas Instruments TLV320AIC3268EVM-U Manual de usuario

Texas Instruments

Texas Instruments THS7001 Manual de usuario

Texas Instruments

Texas Instruments FPC401 Manual de usuario

Texas Instruments

Texas Instruments PCM1681 Manual de usuario

Texas Instruments

Texas Instruments EVMK2E Manual de usuario

Texas Instruments

Texas Instruments TPS5430 Manual de usuario

Texas Instruments

Texas Instruments TSC4270 Manual de usuario

Texas Instruments

Texas Instruments TPS53515 Manual de usuario

Texas Instruments

Texas Instruments bq27 10EVM Series Manual de usuario

Texas Instruments

Texas Instruments HSS-MOTHERBOARDEVM Manual de usuario

Texas Instruments

Texas Instruments TPA3101D2 Manual de usuario

Texas Instruments

Texas Instruments TPS630702EVM Manual de usuario

Texas Instruments

Texas Instruments CC3000 Manual de usuario

Texas Instruments

Texas Instruments ADS1 7 EVM-PDK Series Manual de usuario

Texas Instruments

Texas Instruments bq25505 Manual de usuario

Texas Instruments

Texas Instruments INA220 Manual de usuario

Texas Instruments

Texas Instruments XIO2001 Manual de usuario

Texas Instruments

Texas Instruments TPS568236 Manual de usuario

Texas Instruments

Texas Instruments TMS320C6748 Manual de usuario

Texas Instruments

Texas Instruments ADS8353-Q1 Manual de usuario

Texas Instruments

Texas Instruments TPS54672EVM-222 Manual de usuario

Texas Instruments

Texas Instruments LM5156EVM-BST Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario