Testrite Visual Skyscraper Mightee Mount SKMM Series Manual de usuario

Page 1 of 2Version: 2

For ALL 96” units (SKMM8, SKMS8, SKCU8, SKRA8, SKTR8, SKX8) or taller, the uprights are split in half. Each upper section will have to two pre-

attached joining rods sticking out of the bottom.

1. Attach each upright (or bottom upright section if upright is split in half) to each base using screws provided.

2. IF UPRIGHT IS SPLIT IN HALF: Fully insert the rods of the upper section into the semi-circular holes inside the bottom upright. Fasten the

upper section to the bottom section using the short hex screws provided. Attach one screw from the front face and one screw from the

back face of each upright. Only tighten screws enough for screw to come to a stop with MINIMAL eort. OVERTIGHTENING MAY CAUSE

INDENTING OF THE FACE OF THE LOWER UPRIGHT.

3. Place graphic in the upright channel.

4. Fasten graphic into place using headless set screws provided.

5. Attach second upright to graphic and fasten using headless set screws provided.

NOTE: Model shown below may dier from your model, but assembly instructions remain the same.

Skyscraper Mightee Mount™ - SKMM Series

SKMM6 shown

3. 4. 5.

Page 2 of 2Version: 2

For ALL 96” units (SKMM8, SKMS8, SKCU8, SKRA8, SKTR8, SKX8) or taller, the uprights are split in two sections.

Each upper section will have to two pre-attached joining rods sticking out of the bottom.

1. Attach each upright (or bottom upright section if upright is in two sections) to each base using screws

provided.

2. FOR THE TWO-SECTION UPRIGHTS ONLY: See step 2 on page 1.

3. Place graphic in the upright channel.

4. Fasten graphic into place using headless set screws provided.

5. Attach next upright to graphic.

6. Fasten graphic into place using headless set screws provided.

NOTE: Model shown below may dier from your model, but assembly instructions remain the same.

Skyscraper Mightee Mount™ - with SKCU, SKRA

SKMM7 with SKCU7 shown

3. 4.

5. SKCU Upright

1. SKMM Base

6. SKCU Upright 5. SKRA Upright 6. SKRA Upright

SKMM6 with SKRA6 shown

1. SKCU Base 1. SKRA Base

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Rack y soporte de Testrite Visual

Testrite Visual

Testrite Visual Charisma SEG XSS Series Manual de usuario

Testrite Visual

Testrite Visual Charisma SEG Expo Stand XP Series Manual de usuario

Testrite Visual

Testrite Visual Charisma SEG XSS Custom Adjustable Series Manual de usuario

Testrite Visual

Testrite Visual Charisma SEG Epic Stand XS Series Manual de usuario

Testrite Visual

Testrite Visual Rolling Teacher Shield Series Manual de usuario

Testrite Visual

Testrite Visual Charisma Frame XSMA Manual de usuario

Testrite Visual

Testrite Visual Charisma SEG XSS Custom Adjustable Series Manual de usuario

Testrite Visual

Testrite Visual Privacy Stand PVC3 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario