TESmart HKS0801A20 Instrucciones de instalación

SUPPORT MANUAL

TESmart 8-Port HDMI KVM

Switch - Autoscan, Rackmount,

Ethernet, USB Hub, 4K 30hz

HKS0801A20

www.buytesmart.com [email protected]

INTRODUCTION

This 8x1 HDMI KVM switch provides you with great flexibility in

integrating cross-platform computer equipment easily.

It makes you available to switch easily and reliably between any HDMI

computers using one HDMI compliant display.

The 8x1 HDMI KVM switch supports USB 2.0 hub and USB 2.0

keyboard /mouse. By using USB 2.0 hub ports on the KVM, you even

can attach USB drive, printer, barcode scanner or other USB devices to

the KVM.

Switching can be controlled through variable methods, such as the front

panel source selector buttons, RS232 commands, IP commands, IR

signals and hot keys on keyboard.

With EDID emulators in every input ports, keep PCs always have correct

display information, prevent display settings changed while switching

input ports.

HKS0801A20

FEATURES

Using one USB console controls 8 HDMI computers.

Support UNIX, Windows, Debian, Ubuntu, Fedora, MAC OSX,

Raspbian, Ubuntu for Raspberry Pi and other Linux based systems.

With EDID emulators in every input ports, keep PCs always have the

correct display information.

Supports hot plug, connect or disconnect devices to the KVM switch

in any time and without turning off the devices.

Supports auto switching to monitor computers in a specified time

interval.

Supports front panel buttons, IR signals, keyboard hot keys, RS232

serial commands or IP commands to control the KVM switch.

Available to use keyboard without any delay after switching the input

sources.

Supports resolutions up to 3840x2160 @30Hz.

With extra standard USB 2.0 hub port, it is possible to connect

barcode scanners, USB hard drives or other USB devices to the KVM

easily as if you have plugged these devices directly yo the computer.

Supports DVI-D single link sources and displays with the use of

HDMI-to-DIV adapters.

HKS0801A20

PACKING LIST

1 x 8x1 HDMI KVM Switch

1 x DC 12V 2A Power Adapter

1 x IR Remote Control

1 x IR Receiver Cable

1 x 3 Pins Connector (For RS232)

2 x Rack-ears

4 x 5' KVM Cables

1 x User manual

HKS0801A20

PANEL DESCRIPTION

HKS0801A20

CONNECTION DIAGRAM

HKS0801A20

SPECIFICATION

HKS0801A20

8x1 HDMI KVM Switch

Functiona

lity:

Auto Scan

Yes

rt selection

Front panel buttons

Yes

Keyboard hotkeys

Yes

IR remote control

Yes

Console commands

RS232 / IP

Technical:

Max. Resolution

3840x2160@30Hz

HDMI version

1.4

Auto to get EDID

Yes

Data rate

10.2 Gbps

Auto scan interval

5~3600 Seconds

Beep Sound

On/Off

OSD

Sup

ported OS

Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/

Raspbian /Ubuntu for Raspberry Pi and other Linux

based system

nsole ports

Keyboard emulation

1 * USB Type A

Mouse emulation

1 * USB Type A

USB 2.0 Hub ports

2 * USB Type A

Video /Audio

1 * HDMI Type A

RS232

3 Pins jack

LAN (TCP/IP)

1 * RJ45

IR extension input

1 * AUX

ystem ports

USB Data

8 * USB Type B

Video / Audio

8 * HDMI Type A

ESD protection

Human body model - ±8kV (Air-gap discharge)

Mechanical:

Chasing material

Metal

Product Dimensions

440 (L) x 150 (W) x 44.5 (H) mm

Item Weight

1800g

HKS0801A20

BASIC OPERATIONS

1- Port selection

Use front panel keypad

Directly press button [1]-[8] to select input ports 1-8.

Use IR remote control

Press [1/A], [2/B]-[8/H] directly to select input ports 1-8.

Use keyboard hot keys

Press keyboard [Scroll Lock] key 2 times then press [1]-[8] within 2

seconds to directly select input ports 1-8.

Press keyboard [Scroll Lock] key 2 times then press [Page Up-

]/[Page Down] to select previous or next port.

2- Turn on/off auto input detection and switch

Press button [M] on the remote control to turn on/off the auto input

detection.

Auto input detection and switch mode on:

When plugging a new HDMI input source to the KVM switch or

powering on the HDMI input source, the KVM switch will automatically

select the input port that is connected to this input source.

When unplugging or powering off the HDMI input source, the KVM

switch will switch to the input port which was plugged or powered last on

the HDMI input source.

Auto input detection and switch mode off:

When plugging in a new HDMI input source to the KVM switch or

powering on the HDMI input source, the KVM switch would not do

anything, also when unplugging or powering off the HDMI input source.

HKS0801A20

3- Mute/Unmute buzzer

IR remote control

Press button [ ] on the remote control to mute or unmute the

buzzer.

Keyboard hot keys

Press the keyboard [Scroll Lock] key 2 times then press [F11] to

mute or unmute the buzzer.

4- Turn on/off the auto scan mode

Front panel key pad

Press [Scan] button to start auto scanning, then the KVM will auto-

matically loop among all the powered on input sources with a specified

time interval, press [Scan] again to stop scanning.

IR remote control

Press [P] button to start auto scanning, then the KVM will automati-

cally loop among all the powered on input sources with a specified time

interval, press [P] again to stop scanning.

Keyboard hot keys

Press keyboard [Scroll Lock] key 2 times then press [Space] key

within 2 seconds to start auto scanning, the KVM will automatically loop

among all the powered on input sources with a specified time interval,

press [Esc] key to stop scanning.

5- Setup time interval of auto scan mode

Press front panel button [MIN] to loop between 0-59 minutes.

Press front panel button [SEC] to loop between 0-59 seconds.

After setting the minutes and seconds, press the button [Set] to

enter the final scan time interval setting.

BASIC OPERATIONS

HKS0801A20

Tabla de contenidos

Otros manuales de Cambiar de TESmart

TESmart

TESmart HKS0801A30 Manual de usuario

TESmart

TESmart HKS0401A1S Manual de usuario

TESmart

TESmart HSW0801A10 Manual de usuario

TESmart

TESmart HKS0402A1U-R Manual de usuario

TESmart

TESmart HKS0401B2U Manual de usuario

TESmart

TESmart HSW0801A1U Manual de usuario

TESmart

TESmart HKS0801A1U Manual de usuario

TESmart

TESmart HKS0202A2U Manual de usuario

TESmart

TESmart PKS0201A10 Manual de usuario

TESmart

TESmart HDK0202A1U Manual de usuario

TESmart

TESmart PCK0402A10 Manual de usuario

TESmart

TESmart HKS0201A30 Manual de usuario

TESmart

TESmart HSW1601A10 Manual de usuario

TESmart

TESmart HKS0401A1U-G Instrucciones de instalación

TESmart

TESmart HKS0401A1U-B Instrucciones de instalación

TESmart

TESmart PKS0802A10 Especificaciones técnicas

TESmart

TESmart HMA0808A30 Manual de usuario

TESmart

TESmart PKS0201A10 Manual de usuario

TESmart

TESmart PKS0402A20 Manual de usuario

TESmart

TESmart HKS0402A2U Manual de usuario

TESmart

TESmart PKS0201A10 Manual de usuario

TESmart

TESmart HKS0401B1U Manual de usuario

TESmart

TESmart HKS0401A1U-R Instrucciones de instalación

TESmart

TESmart HKS1601A10 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario