Teridian 73S1215F Manual de usuario

Simplifying System Integration

73S1215F

Evaluation Board Lite User Guide

August 17, 2009

Rev. 1.1

UG_1215F_045

73S1215F Evaluation Board Lite User Guide UG_1215F_045

2 Rev. 1.1

Teridian Semiconductor Corporation is a registered trademark of Teridian Semiconductor Corporation.

Simplifying System Integration is a trademark of Teridian Semiconductor Corporation.

Microsoft, Windows and Vista are registered trademarks of Microsoft Corporation.

Signum is a trademark of Signum Systems Corporation.

Keil is a trademark of ARM® Ltd.

Linux is a registered trademark of Linus Torvalds.

Slackware is a registered trademark of Patrick Volkerding and Slackware Linux, Inc.

Fedora is a registered trademark of RedHat, Inc.

All other trademarks are the property of their respective owners.

Teridian Semiconductor Corporation makes no warranty for the use of its products, other than expressly

contained in the Company’s warranty detailed in the Teridian Semiconductor Corporation standard Terms

and Conditions. The company assumes no responsibility for any errors which may appear in this

document, reserves the right to change devices or specifications detailed herein at any time without

notice and does not make any commitment to update the information contained herein. Accordingly, the

reader is cautioned to verify that this document is current by comparing it to the latest version on

http://www.teridian.com or by checking with your sales representative.

Teridian Semiconductor Corp., 6440 Oak Canyon, Suite 100, Irvine, CA 92618

TEL (714) 508-8800, FAX (714) 508-8877, http://www.teridian.com

UG_1215F_045 73S1215F Evaluation Board Lite User Guide

Rev. 1.1 3

Table of Contents

1Introduction ...................................................................................................................................5

1.1 Evaluation Board LIte Package Contents..............................................................................6

1.2 Evaluation Board Lite Features.............................................................................................6

1.3 Recommended Equipment and Test Tools............................................................................6

2Evaluation Board Lite Basic Setup...............................................................................................7

2.1 Connecting the Evaluation Board Lite with an Emulation Tool ...............................................8

2.2 Loading User Code into the Evaluation Board Lite.................................................................8

3Using the USB CCID Application................................................................................................10

3.1 Driver and Software Installation...........................................................................................10

3.1.1 Installation on Windows XP .......................................................................................10

3.1.2 Installation on a Linux System...................................................................................11

3.2 Frequently Asked Questions...............................................................................................11

473S1215F Evaluation Board Lite Hardware Description............................................................13

4.1 Jumpers, Switches and Test Points.....................................................................................13

4.2 Schematic...........................................................................................................................16

4.3 PCB Layouts.......................................................................................................................17

4.4 Bill of Materials ...................................................................................................................20

4.5 Schematic Information ........................................................................................................22

4.5.1 Reset Circuit..............................................................................................................22

4.5.2 Oscillators .................................................................................................................22

4.5.3 USB Interface............................................................................................................23

4.5.4 Smart Card Interface .................................................................................................23

5Ordering Information...................................................................................................................25

6Related Documentation...............................................................................................................25

7Contact Information.....................................................................................................................25

Revision History..................................................................................................................................26

73S1215F Evaluation Board Lite User Guide UG_1215F_045

4 Rev. 1.1

Figures

Figure 1: 73S1215F Evaluation Board Lite...............................................................................................5

Figure 2: 73S1215F Evaluation Board Lite Basic Connections.................................................................7

Figure 3: EmulatorWindow Showing RESET and ERASE Buttons...........................................................9

Figure 4: Emulator Window Showing Erased Flash Memory and File Load Menu.....................................9

Figure 5: 73S1215F Evaluation Board Lite Jumper, Switch and Test Point Location...............................15

Figure 6: 73S1215F Evaluation Board Lite Electrical Schematic.............................................................16

Figure 7: 73S1215F Evaluation Board Lite Top View (Silkscreen) ..........................................................17

Figure 8: 73S1215F Evaluation Board Lite Bottom View (Silkscreen) .....................................................17

Figure 9: 73S1215F Evaluation Board Lite Top Signal Layer..................................................................18

Figure 10: 73S1215F Evaluation Board Lite Middle Layer 1 – Ground Plane..........................................18

Figure 11: 73S1215F Evaluation Board Lite Middle Layer 2 – Supply Plane...........................................19

Figure 12: 73S1215F Evaluation Board Lite Bottom Signal Layer...........................................................19

Figure 13: External Components for RESET..........................................................................................22

Figure 14: Oscillator Circuit....................................................................................................................22

Figure 15: USB Connections..................................................................................................................23

Figure 16: Smart Card Connections.......................................................................................................24

Tables

Table 1: Flash Programming Interface Signals.........................................................................................8

Table 2: Evaluation Board Lite Jumper, Switch and Test Point Description.............................................13

Table 3: 73S1215F Evaluation Board Lite Bill of Materials......................................................................20

UG_1215F_045 73S1215F Evaluation Board Lite User Guide

Rev. 1.1 5

1 Introduction

The Teridian Semiconductor Corporation (TSC) 73S1215F Evaluation Board Lite is used to demonstrate

the capabilities of the 73S1215F Smart Card Controller devices. It has been designed to operate either

as a standalone or a development platform.

The 73S1215F Evaluation Board Lite can be programmed to run any of the Teridian turnkey applications

or a user-developed custom application. Teridian provides its USB CCID application preloaded on the

board and an EMV testing application on the CD.

Applications can be downloaded through the In-Circuit-Emulator (ICE) or through the TSC Flash

Programmer Model TFP2. As a development tool, the Evaluation Board Lite has been designed to

operate in conjunction with an ICE to develop and debug 73S1215F based embedded applications.

Figure 1: 73S1215F Evaluation Board Lite

73S1215F Evaluation Board Lite User Guide UG_1215F_045

6 Rev. 1.1

1.1 Evaluation Board LIte Package Contents

The 73S1215F Evaluation Board Lite package contains the following:

•73S1215F Evaluation Board Lite: 4-layer, square PWB as shown in Figure 1, containing the

73S1215F with the preloaded turnkey program USB CCID.

•12 VDC/1,000 mA universal wall transformer with 2.1 mm plug ID (CUI Inc. – EPAS-101W-12).

•USB cable, A/B, male, 2 meters (Digi-Key AE1379-ND).

•CD containing documentation (data sheet, board schematic, BOM and layout), evaluation code and

utilities.

1.2 Evaluation Board Lite Features

The 73S1215F Evaluation Board Lite (see Figure 1) includes the following features:

•USB 2.0 full speed interface

•RS-232 interface

•Single smart card interface

•ICE/Programmer interface

•Real Time Clock (RTC) capability

•4 LEDs

1.3 Recommended Equipment and Test Tools

The following equipment and tools (not provided) are recommended for use with the 73S1215F

Evaluation Board Lite package:

•For functional evaluation: PC with Microsoft®Windows®XP or Vista®or a Linux®workstation,

equipped with an RS232 (COM) port and or a USB port.

•For software development (MPU code)

Signum™ ICE (In Circuit Emulator): ADM-51. Refer to

http://signum.temp.veriohosting.com/Signum.htm.

Keil™ 8051 C Compiler Kit: CA51. Refer to http://www.keil.com/c51/ca51kit.htm and

http://www.keil.com/product/sales.htm.

UG_1215F_045 73S1215F Evaluation Board Lite User Guide

Rev. 1.1 7

2 Evaluation Board Lite Basic Setup

Figure 2 shows the basic connections of the Evaluation Board-Lite with the external equipment.

The power supply can come from any AC-DC converter block able to generate a DC power supply of 7 V

min / 12 V max / 400mA connected to connector PJ1.

The communication with an external host can be accommodated by either:

•A standard USB 2.0 Full Speed Interface or

•A standard RS-232 serial interface (TX/RX only).

The board provides bydefault the USB CCID application. Refer to Section 3for information to set up and

run the USB CCID application.

Figure 2: 73S1215F Evaluation Board Lite Basic Connections

73S1215F Evaluation Board Lite User Guide UG_1215F_045

8 Rev. 1.1

2.1 Connecting the Evaluation Board Lite with an Emulation Tool

The 73S1215F Evaluation Board Lite can operate with an In-Circuit-Emulator (ICE) from Signum Systems

(model ADM-51). The Signum System POD has a ribbon cable that must be directly attached to

connector J2 (see Figure 2).

Signum Systems offers different pod options depending on user needs. The standard pod allows users to

perform typical emulator functions such as symbolic debugging, in-line breakpoints, memory examination

and/or modification, etc. Other pod options enable code trace capability and/or complex breakpoints at an

additional cost.

2.2 Loading User Code into the Evaluation Board Lite

Hardware Interface for Programming

The signals listed in Table 1are necessary for communication between the Flash Downloader or ICE and

the 73S1215F.

Table 1: Flash Programming Interface Signals

Signal Direction Function

E_TCLK Output from 73S1215F Data clock

E_RXTX Bi-directional Data input/output

E_RST1Bi-directional Flash Downloader Reset (active low)

1The E_RST signal should only be driven by the TFP2 when enabling these

interface signals. The TFP2 must release E_RST at all other times.

The signals in Table 1, along with 3.3 V and GND, are available on the emulator header J2. Production

modules may be equipped with much simpler programming connectors, e.g. a 5x1 header.

Programming of the flash memory requires either the Signum Systems ADM51 in-circuit emulator or the

TSC Flash Programmer Model TFP2 provided by Teridian.

Loading Code with the In-Circuit Emulator

If firmware exists in the 73S1215F flash memory, the memory must be erased before loading a new file

into memory. In order to erase the flash memory, the RESET button in the emulator software must be

clicked followed by the ERASE button (see Figure 3).

Once the flash memory is erased, a new file can be loaded using the Load command in the File menu.

The dialog box shown in Figure 4makes it possible to select the file to be loaded by clicking the Browse

button. Once the file is selected, pressing the OK button loads the file into the flash memory of the IC.

At this point, the emulator probe (cable) can be removed. Once the 73S1215F device is reset using the

reset button on the evaluation board, the new code starts executing.

Loading Code with the TSC Flash Programmer Model TFP2

Follow the instructions given in the TSC Flash Programmer Model TFP2 User’s Manual.

UG_1215F_045 73S1215F Evaluation Board Lite User Guide

Rev. 1.1 9

Figure 3: Emulator Window Showing RESET and ERASE Buttons

Figure 4: Emulator Window Showing Erased Flash Memory and File Load Menu

RESET

BUTTON

ERASE

BUTTON

73S1215F Evaluation Board Lite User Guide UG_1215F_045

10 Rev. 1.1

3 Using the USB CCID Application

The USB CCID firmware is pre-installed on the 73S1215F Evaluation Board Lite. To operate correctly it

requires a PC with the appropriate driver installed to be connected through its USB port. When powered-

up, the board is able to run with the demonstration host application included on the CD.

The demonstration application is named CCID-USB.vshost.exe and is located in the “C:\TSC\12xxF

Vy.yy\CCID USB Host App C#\App\Bin” directory (where y.yy is the latest version of the firmware

release). This is a host application that allows:

•Smart card activation and deactivation, in ISO or EMV mode.

•Smart card APDU commands to be exchanged with the smart card inserted in the board.

•Starting a test sequence in order to test and evaluate the board performance against an EMV test

environment.

3.1 Driver and Software Installation

3.1.1 Installation on Windows XP

Two drivers are available for use with Windows XP:

•The standard Microsoft Windows XP driver and

•The Teridian provided driver that adds additional features beyond the capabilities of the Microsoft

driver. See the 73S1215F, 73S1217F CCID Application Note for further details on the differences

between the two drivers.

When using the 73S1215F Evaluation Board Lite, the Microsoft provided driver should be used as the

TSC drivers extended features are not available on the Evaluation Board-Lite.

The Microsoft CCID driver included on the CD is used by Teridian for testing. Check with

Microsoft for the latest driver upgrades.

Follow these steps to install the software on a PC running Windows XP:

•Extract “12xxF CCID+DFU Vy.yy Release.zip” (where y.yy is the latest version of the firmware

release).

oCreate an install directory. For example: “C:\TSC\”.

oUnzip “12xxF CCID+DFU Vy.yy Release.zip” to the just created folder. All applications and

documentation needed to run the board with a Windows PC will be loaded to this folder. Plug the

supplied power adaptor into the DC Jack and a wall outlet. LED0 should now come on.

•Plug the supplied adapter into the 12V DC jack and a wall outlet.

•Connect the USB cable between the host system and the 73S1215F Evaluation Board Lite.

•The host system should recognize the board and start the Add New Hardware Installation wizard.

When the wizard prompts, select the Microsoft provided standard Windows driver.

oSelect the usbccid.inf file located in the “C:\TSC\12xxF CCID+DFU Vy.yy Release\USB-CCID

Firmware\CCID USB\CCID+DFU USB Drivers\MS Generic” subdirectory. The uscccid.inf and

usbccid.sys files must be in the same directory on the host.

•Follow the prompts until the process is completed.

•Run “CCID-DFU_USB_vy.yy.exe” (located in the path - C:\TSC\12xxF CCID+DFU C:\TSC\12xxF

CCID+DFU V2.00 Release\Host Applications\Windows App\Bin\Release Release\Host

Applications\Windows App\Bin\Release) on the host system to execute the host demonstration

application.

At this point the application window should appear. For additional information regarding the use of the

Teridian Host application, refer to the 73S12xxF USB-CCID Host GUI Users Guide (UG_12xxF_037).

Otros manuales para 73S1215F

Tabla de contenidos

Otros manuales de Placa madre de Teridian

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 78Q2120C09 Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 73S8009C Manual de usuario

Teridian

Teridian 73S1217F Manual de usuario

Teridian

Teridian 73S8024C Manual de usuario

Teridian

Teridian 73S8023C Manual de usuario

Teridian

Teridian 71M6534H Manual de usuario

Teridian

Teridian TFP2 Manual de usuario

Teridian

Teridian 73S1217F Manual de usuario

Teridian

Teridian 71M6515H Manual de usuario

Teridian

Teridian 73M1903 Manual de usuario

Teridian

Teridian 73S1209F Manual de usuario

Teridian

Teridian 71M6513 Manual de usuario

Teridian

Teridian 71M6531 Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 73M1966B Manual de usuario

Teridian

Teridian 71M6515H Manual de usuario

Teridian

Teridian TFP2 Manual de usuario

Teridian

Teridian 73S1215F Manual de usuario

Teridian

Teridian 73M1866B Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 73S1217F Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario