Teridian 73S1215F Manual de usuario

Simplifying System Integration

73S1215F

Evaluation Board User Guide

August 17, 2009

Rev. 1.8

UG_1215F_039

Downloaded from: http://www.datasheetcatalog.com/

73S1215F Evaluation Board User Guide UG_1215F_039

2 Rev. 1.8

Teridian Semiconductor Corporation is a registered trademark of Teridian Semiconductor Corporation.

Simplifying System Integration is a trademark of Teridian Semiconductor Corporation.

Microsoft, Windows and Vista are registered trademarks of Microsoft Corporation.

Linux is a registered trademark of Linus Torvalds.

Signum is a trademark of Signum Systems Corporation.

Keil is a trademark of ARM®Ltd.

Slackware is a registered trademark of Patrick Volkerding and Slackware Linux, Inc.

Fedora is a registered trademark of RedHat, Inc.

All other trademarks are the property of their respective owners.

Teridian Semiconductor Corporation makes no warranty for the use of its products, other than expressly

contained in the Company’s warranty detailed in the Teridian Semiconductor Corporation standard Terms

and Conditions. The company assumes no responsibility for any errors which may appear in this

document, reserves the right to change devices or specifications detailed herein at any time without

notice and does not make any commitment to update the information contained herein. Accordingly, the

reader is cautioned to verify that this document is current by comparing it to the latest version on

http://www.teridian.com or by checking with your sales representative.

Teridian Semiconductor Corp., 6440 Oak Canyon, Suite 100, Irvine, CA 92618

TEL (714) 508-8800, FAX (714) 508-8877, http://www.teridian.com

Downloaded from: http://www.datasheetcatalog.com/

UG_1215F_039 73S1215F Evaluation Board User Guide

Rev. 1.8 3

Table of Contents

1Introduction ...................................................................................................................................5

1.1 Evaluation Kit Contents.........................................................................................................6

1.2 Evaluation Board Features....................................................................................................6

1.3 Recommended Equipment and Test Tools............................................................................6

2Evaluation Board Basic Setup......................................................................................................7

2.1 Connecting the Evaluation Board with an Emulation Tool......................................................8

2.2 Loading User Code into the Evaluation Board .......................................................................9

3Using the USB CCID Application................................................................................................11

3.1 Driver and Host Demonstration Software Installation...........................................................11

3.1.1 Installation on Windows XP .......................................................................................11

3.1.2 Driver and Software Installation on a Linux System....................................................12

3.2 Frequently Asked Questions...............................................................................................12

4Evaluation Board Hardware Description....................................................................................14

4.1 Jumpers, Switches and Modules.........................................................................................14

4.2 Test Points .........................................................................................................................20

4.3 Schematic...........................................................................................................................21

4.4 PCB Layouts.......................................................................................................................22

4.5 Bill of Materials ...................................................................................................................28

4.6 Schematic Information ........................................................................................................31

4.6.1 Reset Circuit..............................................................................................................31

4.6.2 Oscillators .................................................................................................................31

4.6.3 LCD ..........................................................................................................................32

4.6.4 USB Interface............................................................................................................32

4.6.5 Smart Card Interface .................................................................................................33

5Ordering Information...................................................................................................................34

6Related Documentation...............................................................................................................34

7Contact Information.....................................................................................................................34

Revision History..................................................................................................................................35

Downloaded from: http://www.datasheetcatalog.com/

73S1215F Evaluation Board User Guide UG_1215F_039

4 Rev. 1.8

Figures

Figure 1: 73S1215F Evaluation Board .....................................................................................................5

Figure 2: 73S1215F Evaluation Board Basic Connections........................................................................7

Figure 3: 73S1215F Evaluation Board Basic Connections with ADM-51 ICE............................................8

Figure 4: Emulator Window Showing RESET and ERASE Buttons.........................................................10

Figure 5: Emulator Window Showing Erased Flash Memory and File Load Menu...................................10

Figure 6: Board Setup for the USB-CCID Application.............................................................................12

Figure 7: 73S1215F Evaluation Board Jumper, Switch and Module Locations........................................19

Figure 8: 73S1215F Evaluation Board Electrical Schematic ...................................................................21

Figure 9: 73S1215F Evaluation Board Top View (Silkscreen).................................................................22

Figure 10: 73S1215F Evaluation Board Bottom View (Silkscreen)..........................................................23

Figure 11: 73S1215F Evaluation Board Top Signal Layer ......................................................................24

Figure 12: 73S1215F Evaluation Board Middle Layer 1 – Ground Plane.................................................25

Figure 13: 73S1215F Evaluation Board Middle Layer 2 – Supply Plane .................................................26

Figure 14: 73S1215F Evaluation Board Bottom Signal Layer .................................................................27

Figure 15: External Components for RESET..........................................................................................31

Figure 16: Oscillator Circuit....................................................................................................................31

Figure 17: LCD Connections..................................................................................................................32

Figure 18: USB Connections..................................................................................................................32

Figure 19: Smart Card Connections.......................................................................................................33

Tables

Table 1: Flash Programming Interface Signals.........................................................................................9

Table 2: Evaluation Board Jumper, Switch and Module Description .......................................................14

Table 3: Evaluation Board Test Point Description...................................................................................20

Table 4: 73S1215F Evaluation Board Bill of Materials............................................................................28

Downloaded from: http://www.datasheetcatalog.com/

UG_1215F_039 73S1215F Evaluation Board User Guide

Rev. 1.8 5

1 Introduction

The Teridian Semiconductor Corporation (TSC) 73S1215F Evaluation Board is used to demonstrate the

capabilities of the 73S1215F Smart Card Controller device. It has been designed to operate either as a

standalone or a development platform.

The 73S1215F Evaluation Board can be programmed to run any of the Teridian turnkey applications or a

user-developed custom application. Teridian provides its USB CCID application preloaded on the board

and an EMV testing application on the CD.

Applications can be downloaded through the In-Circuit-Emulator (ICE) or through the TSC Flash

Programmer Model TFP2. As a development tool, the evaluation board has been designed to operate in

conjunction with an ICE to develop and debug 73S1215F based embedded applications.

Figure 1: 73S1215F Evaluation Board

Downloaded from: http://www.datasheetcatalog.com/

73S1215F Evaluation Board User Guide UG_1215F_039

6 Rev. 1.8

1.1 Evaluation Kit Contents

The 73S1215F Evaluation Kit contains the following:

•73S1215F Evaluation Board: 4-layer, rectangular PWB as shown in Figure 1(identification number

E1215N12C1 Rev C), containing the 73S1215F with the preloaded turnkey program USB CCID.

•12 VDC/1,000 mA universal wall transformer with 2.1 mm plug ID (CUI Inc. – EPAS-101W-12).

•USB cable, A-B, male/male, 2 meters (Digi-Key AE9932-ND)

•CD containing documentation (data sheet, and user guides), software API libraries, evaluation code,

and utilities.

1.2 Evaluation Board Features

The 73S1215F Evaluation Board (see Figure 1) includes the following:

•USB 2.0 full speed interface

•RS-232 interface

•Dual smart card interface

•ICE/Programmer interface

•2 line x 16 character LCD module

•6 x 5 keypad

•Real Time Clock (RTC) capability

•4 LEDs

1.3 Recommended Equipment and Test Tools

The following equipment and tools (not provided) are recommended for use with the 73S1215F

Evaluation Kit:

•For functional evaluation: PC with Microsoft®Windows®XP or Vista®, or a workstation running Linux®

equipped with an USB port.

•For software development (MPU code)

Signum™ ICE (In Circuit Emulator): ADM-51. Refer to

http://signum.temp.veriohosting.com/Signum.htm.

Keil™ 8051 C Compiler Kit: CA51. Refer to http://www.keil.com/c51/ca51kit.htm and

http://www.keil.com/product/sales.htm.

Downloaded from: http://www.datasheetcatalog.com/

UG_1215F_039 73S1215F Evaluation Board User Guide

Rev. 1.8 7

2 Evaluation Board Basic Setup

Figure 2 shows the basic connections of the evaluation board with the external equipment.

The power supply can come from three sources:

•A regulated lab power supply connected to the banana plugs J2, J3 and J5. In this case, the board

main switch S1 has no effect.

•Any AC-DC converter block (default), able to generate a DC power supply of 7 V min / 12 V max /

400 mA. In this case, the board main switch S1 connects or disconnects the supply to the board.

•The +5 V from the USB bus when connected to a computer or hub able to support USB-powered

devices. In this case, the board main switch S1 has no effect. When the board is powered from the

USB bus, the application is bus-powered and the embedded application must be designed for this.

The USB VBUS specification allows the VBUS voltage to be as low as 4.4 V. This will violate

the minimum VPC voltage for smart card operation which is specified as 4.75 V. As a result,

this power configuration is not recommended.

The communication with an external host can be accommodated by either:

•A standard USB 2.0 Full Speed Interface or

•A standard RS-232 serial interface (TX/RX only).

Figure 2: 73S1215F Evaluation Board Basic Connections

The board provides by default the USB CCID application. Refer to Section 3for information on setting up

and running the USB CCID application.

Downloaded from: http://www.datasheetcatalog.com/

73S1215F Evaluation Board User Guide UG_1215F_039

8 Rev. 1.8

2.1 Connecting the Evaluation Board with an Emulation Tool

The 73S1215F Evaluation Board can operate with an In-Circuit-Emulator (ICE) from Signum Systems

(model ADM-51). Figure 3shows the connections between the ICE and the evaluation board. The

Signum System pod has a ribbon cable that must be directly attached to connector J11.

Signum Systems offers different pod options depending on user needs. The standard pod allows users to

perform typical emulator functions such as symbolic debugging, in-line breakpoints, memory examination

and/or modification, etc. Other pod options enable code trace capability and/or complex breakpoints at an

additional cost.

Figure 3: 73S1215F Evaluation Board Basic Connections with ADM-51 ICE

Downloaded from: http://www.datasheetcatalog.com/

UG_1215F_039 73S1215F Evaluation Board User Guide

Rev. 1.8 9

2.2 Loading User Code into the Evaluation Board

Hardware Interface for Programming

The signals listed in Table 1are necessary for communication between the TFP2 or ICE and the

73S1215F.

Table 1: Flash Programming Interface Signals

Signal Direction Function

E_TCLK Output from 73S1215F Data clock

E_RXTX Bi-directional Data input/output

E_RST1Bi-directional Flash Downloader Reset (active low)

1The E_RST signal should only be driven by the TFP2 when enabling these

interface signals. The TFP2 must release E_RST at all other times.

The signals in Table 1, along with 3.3 V and GND, are available on the emulator header J11. Production

modules may be equipped with much simpler programming connectors, e.g. a 5x1 header.

Programming of the flash memory requires either the Signum Systems ADM51 in-circuit emulator or the

TSC Flash Programmer Model TFP2 provided by Teridian.

Loading Code with the In-Circuit Emulator

If firmware exists in the 73S1215F flash memory, the memory must be erased before loading a new file

into memory. In order to erase the flash memory, the RESET button in the emulator software must be

clicked followed by the ERASE button (see Figure 4).

Once the flash memory is erased, a new file can be loaded using the Load command in the File menu.

The dialog box shown in Figure 5makes it possible to select the file to be loaded by clicking the Browse

button. Once the file is selected, pressing the OK button loads the file into the flash memory of the IC.

At this point, the emulator probe (cable) can be removed. Once the 73S1215F device is reset using the

reset button on the evaluation board, the new code starts executing.

Loading Code with the TSC Flash Programmer Model TFP2

Follow the instructions given in the TSC Flash Programmer Model TFP2 User’s Manual.

Downloaded from: http://www.datasheetcatalog.com/

73S1215F Evaluation Board User Guide UG_1215F_039

10 Rev. 1.8

Figure 4: Emulator Window Showing RESET and ERASE Buttons

Figure 5: Emulator Window Showing Erased Flash Memory and File Load Menu

RESET

BUTTON

ERASE

BUTTON

Downloaded from: http://www.datasheetcatalog.com/

Otros manuales para 73S1215F

Tabla de contenidos

Otros manuales de Placa madre de Teridian

Teridian

Teridian 71M6513 Manual de usuario

Teridian

Teridian 71M6531 Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 73S1217F Manual de usuario

Teridian

Teridian 73S8009C Manual de usuario

Teridian

Teridian 73S1217F Manual de usuario

Teridian

Teridian 73S1215F Manual de usuario

Teridian

Teridian 73S1217F Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 73M1903 Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 71M6521 Manual de usuario

Teridian

Teridian 73S8023C Manual de usuario

Teridian

Teridian 73M1866B Manual de usuario

Teridian

Teridian TFP2 Manual de usuario

Teridian

Teridian 71M6515H Manual de usuario

Teridian

Teridian 73M1966B Manual de usuario

Teridian

Teridian 73S8024C Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 73S1210F Manual de usuario

Teridian

Teridian 71M6534H Manual de usuario

Teridian

Teridian TFP2 Manual de usuario

Teridian

Teridian 73S1209F Manual de usuario

Teridian

Teridian 73S1215F Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario