Every person involved with the installation, operation and maintenance of this device has to:
-be qualified
-follow carefully the instructions of this manual
INTRODUCTION:
Thank you for having chosen this professional moving head.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the box you should find: the fixture device, a power cable, an XLR
connection cable, a safety cable and this manual. Please check carefully that there is no damage
caused by transportation. Should there be any, consult your dealer and don’t install this device.
Features:
Lamp: Philips MSD 250/2
Control signal: Standard DMX-512, 16 channels (16 bit), 14 channels (8 bit)
Stand alone operation with master/slave function, can be sound activated
Pan/tilt movement: 8 bit and 16 bit resolution
For smooth and precise resolution
Movement: Pan 630°/ 540°optional, Tilt 265°
High speed of pan/tilt movement, speed of pan/tilt movement is
adjustable
Scan position memory, auto reposition after unexpected movement
8 colors plus white, with two direction rainbow effect,
Rotating gobo wheel has 7 rotating gobos plus open, with gobo indexing and different speed
gobo shake and rainbow effect
Static gobo wheel has 7 static gobos plus open with different speed gobo shaking and rainbow
effect
Simple replacement system for gobos enable freely customization
Prism and prism rotating , with 16 prism macros
Step zoom function 17°, 20 °lens can be selected
Strobe effect : 0~13 flashes per second or random strobe
Dimmer intensity from 0%~100%
Separately stepless 0%~100% frost filters to get soft beam
Local and remotely reset and lamp on/off
Preset program: 7 built in programs can be called up via DMX controller
