Terasic DE2i-150 Manual de usuario

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

CONTENTS

CHAPTER 1

INTRODUCTION

...............................................................................................................................3

1.1 REQUIREMENTS ........................................................................................................................................................3

1.2 DEVELOP WINDOWS PROGRAM ................................................................................................................................3

CHAPTER 2

WINDOWS INSTALLATION

............................................................................................................4

2.1 CREATE WINDOWS 7ISO FILE..................................................................................................................................4

2.2 MAKE AWINDOWS 7BOOTABLE USB FLASH DRIVE................................................................................................6

2.3 BOOT DE2I-150 WITH WINDOWS 7BOOTABLE USB FLASH DRIVE ........................................................................10

ADDITIONAL INFORMATION

.....................................................................................................................................14

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

Chapter 1

Introduction

This document provides an introduction to the installation of Windows 7 to the mSATA SSD (Solid

State Drivce) on the DE2i-150 board. Examples of how to develop a C/C++ application program on

the system, using the PCI Express channels between the CPU and FPGA, are also provided.

1.1 Requirements

To install Windows to mSATA SSD on DE2i-150, the following items are required:

Windows 7 installation DVD with license from Microsoft

USB flash drive, 8GB at least

Windows based host PC with USB host ports and DVD-ROM.

32-bit Windows 7 is recommended for DE2i-150. The host PC may be running any version of

Windows compatible with the tools needed to download and setup the flash drive.

1.2 Develop Windows Program

To develop a C/C++ software program to communicate with FPGA, the following items are required:

PCI express driver installed (provided by Terasic)

C/C++ compiler kit. Visual Studio C/C++ 2012 or Borland C++ Builder 6.0 is preferred.

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

Chapter 2

Windows Installation

This chapter will introduce how to use a USB flash drive to install Windows 7 to mSATA SSD on

DE2i-150 board.

Items needed are listed below:

Windows 7 installation DVD (32-bit version is preferred to support different peripherals’

drivers).

USB flash drive (8G or above)

Host PC equipped with DVD-ROM

In the next section we will introduce how to create a Windows 7 .iso file and put it in a USB flash

drive as a boot device.

2.1 Create Windows 7 ISO File

The process described below will convert a Windows 7 .iso image on a CD/DVD to a flash drive. The

flash drive can then be used to boot the DE2i-150 or be transferred to the SSD on the DE2i-150 board.

1. There are several software applications available to convert Windows installation DVD

to .iso file. A freeware application called ”ISO Recorder” is used to create .iso file.

2. Prepare one Windows 7 installation DVD.

3. Download ISO Recorder from http://alexfeinman.com/isorecorder.htm based on your

operating system and install it to your host PC.

4. Insert Windows 7 installation DVD to the DVD-ROM of your PC.

5. Open "My Computer" and right-click on the Windows 7 installation DVD to select "Create

image from CD/DVD, as shown in Figure 2-1.

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

Figure 2-1 Create image from CD/DVD

6. A “Record CD/DVD”window will show up. Select a folder on the host PC and then click

“Next”.

Figure 2-2 Record CD/DVD window

7. Wait for Windows 7 ISO image creation to complete and then click “Finish”to exit.

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

Figure 2-3 Copy files to create .ISO

2.2 Make a Windows 7 Bootable USB Flash Drive

1. After creating the windows 7.iso file, the next step is to copy this .iso file onto a USB drive.

We used the “windows7-usb-dvd-tool” software on accomplishing it. The Windows 7

USB/DVD download tool from Microsoft is used to make a Windows 7 bootable device.

2. Download the Windows 7 USB/DVD download tool from

http://images2.store.microsoft.com/prod/clustera/framework/w7udt/1.0/en-us/Windows7-

USB-DVD-tool.exe.

3. Execute Windows7-USB-DVD-tool.exe to start the installation.

4. Plug in a USB flash drive into your PC.

5. Execute Windows 7 USB DVD Download Tool from the ALLPROGRAMS list by clicking

the Windows START button and then Windows 7 USB/DVD Download Tool.

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

Figure 2-4 Execute Windows 7 USB DVD Download Tool

6. Select the Windows 7 image source file. This file is in the directory that you chose to store

in file in Step 6 of the last section. Click Next.

Figure 2-5 Select Windows 7 image source file

7. Select the “USB device” as the media type rather than the DVD.

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

Figure 2-6 Choose media device

8. When the next window appears, click on “Begin copying”.

Figure 2-7 Record CD/DVD window

9. Click on the “Erase USB Device” option when a pop-up window appears. Please note that

any information that was on the Flash drive will be erased.

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

Figure 2-8 Erase USB device

10. Click “Yes”to erase Disk.

Figure 2-9 Erase USB device

11. Wait for bootable USB device creation to finish and then click Start over.

Figure 2-10 Bootable USB device created successfully

12. Close the tool.

DE2i-150 Win7 User Manual

www.terasic.com

April 5, 2017

Figure 2-11 Record CD/DVD window

13. The Windows 7 bootable USB flash drive has now been created and is ready to be used

with the DE2i-150 board.

2.3 Boot DE2i-150 with Windows 7 Bootable USB

Flash Drive

1. Plug in your Windows 7 bootable USB flash drive to one of the USB ports on DE2i-150,

as shown in Figure 2-12.

Otros manuales para DE2i-150

Tabla de contenidos

Otros manuales de Microcontrolador de Terasic

Terasic

Terasic OpenVINO Manual de usuario

Terasic

Terasic tNano Manual de usuario

Terasic

Terasic C5P Manual de usuario

Terasic

Terasic ALTERA MAX 10 NEEK Manual de usuario

Terasic

Terasic DE5a-Net Manual de usuario

Terasic

Terasic TR10a-HL Manual de usuario

Terasic

Terasic ALTERA TR5-F40W Manual de usuario

Terasic

Terasic DE5a-Net DDR4 Edition Manual de usuario

Terasic

Terasic DE5a-Net Manual de usuario

Terasic

Terasic OpenVINO Manual de usuario

Terasic

Terasic TRDB_LCM Manual de usuario

Terasic

Terasic DE0-Nano-SoC Manual de usuario

Terasic

Terasic DE1-SOC Manual de usuario

Terasic

Terasic DE5a-Net Manual de usuario

Terasic

Terasic HAN Pilot Platform Manual de usuario

Terasic

Terasic TR-5 Lite FPGA Manual de usuario

Terasic

Terasic Apollo-S10 Manual de usuario

Terasic

Terasic DE5-Net Manual de usuario

Terasic

Terasic SoCKit Manual de usuario

Terasic

Terasic DE5-Net Manual de usuario

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario