Tenda 4G03 Pro Manual de usuario

Installation Guide

N300 Wi-Fi 4G LTE Router

4G03 Pro/4G05

Contents

01 / English

07 / Italiano

13 / Bahasa Indonesia

19 / Română

25 / Vietnamese

31 / Melayu

37 / Čeština

43 / Français

49 / Español

55 / Deutsch

61 /

67 / Polski

73 / Български

79 / Magyar

85 / 

91 / Hrvatski

97 / Slovenčina

103 / Slovenščina

109 / Dansk

115 / Nederlands

121 / Suomi

127 / Eesti

133 / Latviešu

139 / Lietuvių

145 / Português

151 / Svenska

English

Wi-Fi Name : Tenda_XXXXXX

Wi-Fi Key : XXXXXXXX

PWR WPS RST

WAN LAN

LAN

I. Set up the router

Insert a Nano SIM card (direction: see silkscreen) into the slot

of the router until you hear a click.

Use the included power adapter to connect the PWR jack of

the router to a power source.

All LED indicators light up. Wait a few seconds. The router is

connected to the internet when the internet LED indicator ( )

lights solid on.

If the internet LED indicator ( ) does not light solid on, refer to Q1 in FAQ.

Tips

Package contents

N300 Wi-Fi 4G LTE Router × 1

Power adapter × 1

Ethernet cable × 1

Quick installation guide

English

II. Connect clients to the

internet

Connect your wired device, such as a computer, to the

WAN/LAN or LAN port of the router using an Ethernet cable.

Connect your wireless device, such as a smartphone, to the

Wi-Fi network of the router using the Wi-Fi Name and Wi-Fi

Key labeled on the bottom panel of the router.

To further configure the router, such as changing the Wi-Fi name

and Wi-Fi key, log in to the web UI of the router by visiting

tendawifi.com on a connected device or download the Tenda

WiFi App by scanning the QR code below.

If you cannot log in to the web UI of the router, refer to Q2 in FAQ.

Tips:

Tenda WiFi App

•

English

LED indicators

Internet LED

indicator

Solid on

Blinking

Off

Solid on

3 bars

2 bars

1 bars

Blinking

Off

Connected to internet

No internet access

Powered off

Wi-Fi enabled

Device connected to the Ethernet

port

Excellent signal

Good signal

Fair signal

Ready for WPS negotiation

Wi-Fi disabled

No device connected to the

Ethernet port

No signal

Wi-Fi LED

indicator

LED indicator Status Description

Ethernet port

LED indicator

Signal strength

LED indicator

English

Button & port

PWR Power jack

WPS/RST

Button/Port Description

WAN/LAN

LAN

NANO SIM

Used to reset the router, or start WPS negotiation of

the router.

WPS: Press the button,and the Wi-Fi LED indicator

( ) blinks.Within 2 minutes,you can enable the

WPS function of the client device (such as a

smartphone) to connect to the Wi-Fi network of the

router without entering the Wi-Fi password.

Reset: Hold down the button for about 8 seconds,

and release it when all LED indicators light off and

then light up. The router is reset.

•

WAN/LAN multiplexing port.

LAN port by default. Used to connect to such devices

as computers, switches or game machines. When the

Failover function is enabled, the WAN/LAN port only

serves as a WAN port.

Used to connect to computers, switches or game

machines, etc.

Nano SIM card slot.

Insert your Nano SIM card into this slot.

English

FAQ

Check that your SIM card supports LTE or WCDMA.

Check that your SIM card is in your ISP’s service area.

Check that your SIM card balance is sufficient.

Start a web browser on the device connected to the router,

and access http://tendawifi.com. You will be redirected

to the troubleshooting page. Then, perform

troubleshooting as prompted on the page.

Confirm with your ISP if you are in a roaming service area. If

yes, log in to the web UI of the router and navigate to

Internet Settings to enable Data Roaming.

Q1: The internet LED indicator ( ) does not light solid on.

What should I do?

Q2: I cannot access the web UI of the router by visiting

tendawifi.com. What should I do?

A1: Try the following solutions:



If the problem persists, contact our technical support.

A2: Try the following solutions:

If you log in with mobile clients:

Ensure that your wireless device is connected to the Wi-Fi

network of the router.

Disable the cellular network of your wireless device.

Clear the cache of your web browser or try again with

another web browser.

If you log in with computers:

Ensure that the computer has connected to the router

properly.

Ensure that the IP address of your computer is 192.168.0.X

(Xranges from 2 to 254). If not, unplug and replug one end

of the Ethernet cable between the router and the

computer, and try again.

Clear the cache of your web browser or change another

web browser and try again.

Q3: How to reset the router?

If the problem persists, refer to Q3 to reset the router and try

again.

When the device completes startup, press the WPS/RST

button for about 8 seconds, and release it when all LED

indicators light off and then light up. The router will be reset

successfully in about two minutes.

A3:

Q4: How do I access the internet through the SIM card

or(and) WAN port?

Insert a SIM card (if any), connect the WAN/LAN port to the

internet using an Ethernet cable, enable the Failover

function and configure internet parameters on the Internet

Settings page.

A4:

When you access the internet through the SIM card and WAN port, the WAN

port is prioritized for internet access by default. You can manually switch the

SIM card or WAN port to the current internet connection mode on the

Internet Status page as required.

If there is a network failure, the router will automatically switch to an available

internet connection mode.

Tips

•

English

Get support and services

For technical specifications, user guides and more information,

please visit the product page or service page on

www.tendacn.com. Multiple languages are available.

You can see the product name and model on the product label.

Italiano

Wi-Fi Name : Tenda_XXXXXX

Wi-Fi Key : XXXXXXXX

I. Configurare il router

Inserire una scheda Nano SIM (direzione: vedere la serigrafia)

nello slot del router finché non si sente un clic.

Utilizzare l'alimentatore in dotazione collegandolo ad una

presa elettrica e successivamente il connettore PWR jack al

router.

Tutti gli indicatori LED si accendono.Aspettare qualche secondo.

Il router è collegato a Internet quando l'indicatore LED Internet

( ) si accende fisso.

Se l'indicatore LED Internet ( ) non si accende fisso, consultare la sezione Q1 in FAQ.

Suggerimenti

Contenuto della confezione

Router N300 Wi-Fi 4G LTE × 1

Adattatore di alimentazione × 1

Cavo Ethernet × 1

Guida rapida all'installazione

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Enrutador inalámbrico de Tenda

Tenda

Tenda FH303 Manual de usuario

Tenda

Tenda W316R Manual de usuario

Tenda

Tenda nova Manual de usuario

Tenda

Tenda 11N Wireless AP Manual de usuario

Tenda

Tenda W300D Manual de usuario

Tenda

Tenda W311R+ Manual de usuario

Tenda

Tenda W311R+ Manual de usuario

Tenda

Tenda W150D Manual de usuario

Tenda

Tenda A5s Manual de usuario

Tenda

Tenda W307R Manual de usuario

Tenda

Tenda W541R Manual de usuario

Tenda

Tenda W168R Manual de usuario

Tenda

Tenda W300D Manual de usuario

Tenda

Tenda N3 11N Manual de usuario

Tenda

Tenda F303 Manual de usuario

Tenda

Tenda AC6 Manual de usuario

Tenda

Tenda W302R Manual de usuario

Tenda

Tenda RX2 Pro Manual de usuario

Tenda

Tenda Multifunctional Broadband Router Manual de usuario

Tenda

Tenda 5G03 Manual de usuario

Tenda

Tenda 3G611R+ Manual de usuario

Tenda

Tenda nova MW Series Manual de usuario

Tenda

Tenda 3G150M Manual de usuario

Tenda

Tenda Portable 3G Wireless Router Manual de usuario

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario