6 7
1. Controller unit specification
Thermocouple Calibration
Accuracy 0.1℃
Control Accuracy ±0.3℃ from Set point
Control Algorithm PID, Auto Tuning, Balance Controlling
Manual Mode Power Compensation for incoming
Voltage variation (0 ~ 65%)
Operation Range 30 ~ 500℃ (86~932℉)
Power Output Range 15 Amp/zone (3600W/Zone)
StandBy Temperature User Selectable (30~500℃)
Boost Mode 1~99min. 0~65% output
Sensor Thermocouple Type, J or K
Cold Junction
Compensation Internal to enclosure
External Resistance 10Meg. Ohms
Temperature Variation Due to T/C Length None
Input Voltage 90~250VAC, 50/60Hz
Operation Conditions 0 ~ 50 ℃
UP to 90% humidity(Non-Condensing
● PID Control and Balance Control
PID Control is a method in order to maintain temperature at the set temperature
value accurately by controlling output power reflecting proportion, integration, and dif-
ferentiation values. In addition, it can raise same temperatures of nozzle and manifold
accrding to heater capacity.
● Re-Tuning
Auto tuning is a function to extract the governing factors through analysing capacity
of the heaters and heat constant of the mold (characteristics of latent heat and released
heat). It helps precise control of temperature regardless of environmental change.
● Output Type
You can choose either PWM or SSR mode and control it with users optimized envi-
ronment.
● Color touch LCD and various display
You can check and control the status of the product easier through various displays
such as Text/Graph/Digital/Detail
● Mold File
You can Manage Setting data for the each Mold and move and copy
setting data between several apparatus and control.
● Alarm, Reporting and Self inspection
It provides detecting detailed errors and reporting function and it is prossible to
manage the machine quickly with the Alarm function. In addition, you can check the
status of heater and thermocouple with self inspection.
● Controller Unit System
One unit controls 2 zones and it is possible to operate temporary mode without
stopping whole system when there is a problem on near zone.
● Sequence injection timer (option)
You can manage and control timer and controller at the same time and we make the
best circumstances in hot runner controller system.
Feature
The Controller is a device that has a function to maintain the desired tem-
perature consistently by sensing the state of Hot Runner System by use of
high-intellectual computer system named MICOM and input proper power. It
has several important functions as below for precise temperature control.
