Teltonika TRB140 Manual de usuario

https://wiki.teltonika-networks.com/view/TRB140_LEDs

TRB140 LEDs

Main Page > TRB Gateways > TRB140 > TRB140 Manual > TRB140 LEDs

This page contains information the different types of LEDs and their behaviour on a TRB140 device.

Contents

1 Power LED

2 Ethernet port LEDs

3 Mobile network type LEDs

4 Mobile signal strength indication LEDs

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power

connector.

It indicates whether the device is powered on or not.

State Description

LED turned on Device is powered on.

LED turned off Device is not powered on.

Ethernet port LEDs

There are two LEDs located at the top of each Ethernet port.

They provide information on the current states of the Ethernet ports. Each port has two LEDs:

Orange - 10/100 Mbps connection

Green - 1000 Mbps connection

Below is an explanation on the behaviours of green and orange LEDs.

State Description

LED on A data connection on the port is operational (cable plugged in, end

device visible, no data is being transferred).

LED off

No data connection on the port is operational (no cable, bad cable or end

device not visible for some other reason (such as damaged network

card)).

LED blinking Connection established and data is being transferred over this port.

Mobile network type LEDs

The mobile network type LEDs are located near the SIM card slot.

They display which type of Internet connection is currently active.

Action Description

2G LED turned on Device is connected to a 2G network.

3G LED turned on Device is connected to a 3G network.

4G LED turned on Device is connected to a 4G network.

2G blinking Device is connected to a 2G network but hasn't received an IP address.

3G blinking Device is connected to a 3G network but hasn't received an IP address.

4G blinking Device is connected to a 4G network but hasn't received an IP address.

All LEDs blinking at the same time every 500 ms No SIM card or incorrect PIN.

All LEDs turn on and off in a sequence one after the other The device is attempting to connect to a mobile network operator.

Mobile signal strength indication LEDs

The mobile signal strength indication LEDs are located near the SIM card slot.

The number of lit up LEDs represents a different mobile signal strength (RSSI) value in dBm.

No. of lit up LEDS Signal strength

0≤ -111 dBm

1 -110 dBm to -97 dBm

2 -96 dBm to -82 dBm

3 -81 dBm -67 dBm

4 -66 dBm to -52 dBm

5 ≥ -51 dBm

The Mobile signal strength LEDs can also be used as a time indicator for holding the reset

button. When you press and hold the reset button, if there is a User's default configuration

configured on the device, you have to hold it pressed for 6 seconds (by default) to initiate a User's

default configuration reset and 12 seconds (by default) to initiate a Factory reset. Otherwise, it

is only necessary to hold the reset button for 6 seconds to trigger a Factory reset. If the button was

held down longer than 20 seconds (by default) no action will be taken.

While holding the reset button each lit up signal strength LED indicate that a period of two seconds

has passed. In case with TRB140, when all 5 Mobile signal strength LEDs are lit up, they represent

that 10 (LED number multiplied by 2) seconds have passed since you pressed down on the reset

button.

After releasing the button at one of the reset periods, all 5 LEDs will start blinking every 1 second.

This signifies that the router has begun the reset.

Otros manuales de Puerta de Teltonika

Teltonika

Teltonika Voice Fax Gateway Manual de usuario

Teltonika

Teltonika TRB145 Manual de instrucciones

Teltonika

Teltonika TVF20 Series Manual de usuario

Teltonika

Teltonika RUT950 Manual de usuario

Teltonika

Teltonika TRB140 Manual de usuario

Teltonika

Teltonika TRB142 Manual de usuario

Teltonika

Teltonika TRB245 Manual de usuario

Teltonika

Teltonika TRB245 Manual de usuario

Teltonika

Teltonika TRB255 Manual de usuario

Teltonika

Teltonika RUT240 Manual de usuario

Teltonika

Teltonika TRB141 Manual de usuario

Teltonika

Teltonika TRB141 Manual de usuario

Teltonika

Teltonika TRB140 Manual de usuario

Teltonika

Teltonika TRB145 Manual de usuario

Teltonika

Teltonika TRB141 Manual de usuario

Teltonika

Teltonika TRB255 Manual de usuario

Teltonika

Teltonika QSG TRB500 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario